What years were John Deere 4010?
What years were John Deere 4010?
The John Deere 4010 was an American farm tractor in production by the John Deere Company from 1960 to 1963.
Where is the serial number on a John Deere 4010?
John Deere 4010
| 4010 Serial Numbers | |
|---|---|
| Location: | Serial number plate on the rear of the tractor, above the PTO shaft. |
| 1962: | 20201 |
| 1963: | 38200 |
| Final: | 59316 |
What engine is in a John Deere 4010?
John Deere 4010 Engine
| Engine Detail | |
|---|---|
| John Deere | |
| liquid-cooled | |
| Displacement: | 380 ci 6.2 L |
| Bore/Stroke: | 4.125×4.75 inches 105 x 121 mm |
How many HP is a 4020?
The 4020 Diesel has a six-cylinder engine tested at 84 drawbar and 91 PTO horsepower. John Deere’s Syncro Range transmission with 8 forward speeds and two reverse speeds was standard, a power shift transmission was optional.
How much does a 4020 John Deere tractor weight?
John Deere 4020
| Dimensions & Tires | |
|---|---|
| Row crop Wheelbase: | 97.5 inches 247 cm |
| Weight: | 8225 to 9560 pounds |
| Front tire: | 6.00-16 |
| Rear tire: | 15.5-38 |
Where is the serial number on a John Deere engine?
Where is My John Deere Engine Serial Number? As we mentioned, you can locate your ESN on a plate in your engine. This tag is most frequently found attached to one side of the engine or another.
Where can I find the John Deere 4010 serial number?
Open operator station. Transmission details John Deere 4010 photos… Full dimensions and tires Serial number plate on the rear of the tractor, above the PTO shaft. how to read serial numbers… ©2000-2021 – TractorData.com®. Notice: Every attempt is made to ensure the data listed is accurate.
Where can I buy a 1962 John Deere 4010?
1962 John Deere 4010 Diesel selling for local farmer TRACTOR WILL NEED SOME FIXING runs and drives dual hydraulics 3 point wide front no reverse some engine noise at top rpm speeds viewings encouraged located at Kobza Auction in David City, Nebraska Call John for details 402_… Your registration is being reviewed by B&S Equipment Auctions.
What kind of tires does a John Deere 4010 have?
JOHN DEERE 4010 DIESEL TRACTOR, WIDE FRONT END, THREE POINT HITCH , 540/1000 PTO , HAS ONE PAIR OF REAR HDY OUTLETS WITH A FASSE VALVE TO MAKE TWO PAIR, HAS A COUPLE OF DENTS IN THE FRONT OF THE HOOD AND RUGHT SIDE, PAINT IS GOOD, 8 SPEED SYMCRO TRANS, 18.4X34 DRIVE TIRES THAT ARE NEW.
Are there any errors in John Deere tractors?
Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before attempting any service or repair.
Open operator station. Transmission details John Deere 4010 photos… Full dimensions and tires Serial number plate on the rear of the tractor, above the PTO shaft. how to read serial numbers… ©2000-2021 – TractorData.com®. Notice: Every attempt is made to ensure the data listed is accurate.
Is the John Deere logo on Yesterday’s tractors?
None of these trademark holders are affiliated with Yesterday’s Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation.
What are the serial numbers on a John Deere tractor?
There are 90 models listed for John Deere. Just click on a model to see the serial numbers and the years it was manufactured. 820 – 2 Cyl. 830 – 2 Cyl. 820 – 3 Cyl. 830 – 3 Cyl. We have tried to keep this data as accurate as possible. However, if you spot an error please use our Feedback Form to let us know.
Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before attempting any service or repair.
