What would require a 3500 stall converter?
What would require a 3500 stall converter?
For mild performance cars with something like a 350 HP engine, a 2,200 – 2,400 stall is about right. The basic rule of thumb is; if your engine “comes alive” at say, 3,500 RPM, then you want a stall converter with about 3,500 of stall to it.
What kind of torque converter does a Ford C4 use?
B&M 50442 – Tork Master 3000 Torque Converter 1970-1982 For… * This chart is a guideline. The stall speed may vary in your application. JEGS torque converters are economically priced and quality built units with the street enthusiast in mind.
When does a high stall torque converter break?
If the converter has a stall of 3,500 RPM, then it would break loose at 3,500 RPM.
How does a torque converter work in a car?
After having it in the car, i do notice a significant difference. The Stall compared to stock converter is an incredible difference. Driving Normally, the new stall takes a little getting used to, but any amount of throttle that exceeds the driver pushing the gas pedal more then 1/4 of an inch, and it’s a GREAT FEELING and the car really performs.
Can a high stall converter destroy a transmission?
Plus, the higher the stall speed, the more heat the converter will make with hydraulic fluid inside of the converter. Normally a high stall converter will be able to make enough heat to destroy a transmission if you are holding the line too long at full RPM if the stall speed is higher than 3500RPM.
Are there torque converters for the Ford C4?
If you are looking for a Heavy Duty billet, Triple Clutch or Custom High Performance torque converters for Ford C4, Ford C6, AOD, Ranger, Taurus, Ford F150 transmissions; you have come to the right place. How much do our torque converters cost?
If the converter has a stall of 3,500 RPM, then it would break loose at 3,500 RPM.
After having it in the car, i do notice a significant difference. The Stall compared to stock converter is an incredible difference. Driving Normally, the new stall takes a little getting used to, but any amount of throttle that exceeds the driver pushing the gas pedal more then 1/4 of an inch, and it’s a GREAT FEELING and the car really performs.
Can a 6000 rpm torque converter Flash up?
A normal 3000 RPM converter can flash up to around 5000 RPM once you have launched the car. It is a pretty complicated process, so I will keep it simple. A 6000 RPM converter that is behind a stock engine may not go to 6000 RPM because the engine won’t make enough torque to get up to that point because of the load converter.
