What was the purpose of the Cat 3208 engine?

The engine was used in heavy trucks, including tractor trailers, garbage trucks, school buses and construction equipment. The engine was also used in power plant and marine applications.

What is the serial number on a Cat 3208?

CAT 3208 Industrial and Marine specifications manual Serial Number: 75V1-UP 90N1-up, 45 pages, Click to download

How big is a Cat 3208 cylinder head?

CAT 3208 Cylinder Head Bolts. Bolts with 7 dash Marks Step 1 = 80 Nm, 60 lb.ft Step 2 = 150 Nm, 110 lb.ft Click for CAT 3208 engine manuals and specs

What is the compression ratio of a Cat 3208?

The compression ratio for the 210- and 375-horsepower versions of the 3208 is 16.5:1. The compression ratio of the 435-horsepower version is 15.5:1.

The engine was used in heavy trucks, including tractor trailers, garbage trucks, school buses and construction equipment. The engine was also used in power plant and marine applications.

CAT 3208 Cylinder Head Bolts. Bolts with 7 dash Marks Step 1 = 80 Nm, 60 lb.ft Step 2 = 150 Nm, 110 lb.ft Click for CAT 3208 engine manuals and specs

The compression ratio for the 210- and 375-horsepower versions of the 3208 is 16.5:1. The compression ratio of the 435-horsepower version is 15.5:1.

CAT 3208 Industrial and Marine specifications manual Serial Number: 75V1-UP 90N1-up, 45 pages, Click to download

How much does a Cat 3208 engine weigh?

Different variations of the engine weigh between 722 and 899 kilograms. The engine displaces 10.4 liters. It has a cooling system capacity of between 47.3 and 56 liters and a lube oil system capacity of between 12 and 15 liters. Three versions of the 3208 engine have varying power ratings.

How much does it cost to rebuild a Cat 3208?

The $13,000.00 is for a Jasper new/rebuilt engine with the new pistons plus the labor to install it from someone who has a pit and is capable of lifting the chassis and dropping the engine out the bottom and then re-installing. CAT wanted $15,000.00 to install a new/rebuilt 3208. Talk about RIP OFF!!! /ubbthreads/images/graemlins/eek.gif

What kind of engine is a Ford 3208?

At the time the 3208 was designed, it was suppose to be a replacment for the 1160 V8 engine. The 3208 was originally “made” so they say, for Ford to put into their C-Series cab over truck. I have some old Ford literature the list the 3208 under a Ford name (sort of how Cummins is w/ the Ram today).

Who is the current owner of Rockwood motorhome?

Passed through several ownership structures, Rockwood was eventually acquired by Forest River recreational product group that discontinued motorhome construction. Maintained as a brand name, Rockwood is now manufacturing camping, fifth wheel and travel trailers.

How many cylinders does a cat 3408 engine have?

Cylinders. According to the BoatDiesel website, the Cat 3408 is an eight-cylinder engine. This means the engine has eight piston chambers, each of which has a corresponding piston that pumps up and down inside of it. In general, the more cylinders an engine has, the more powerful the engine.

How much does a Caterpillar CAT 3116 engine cost?

It is extremely hard to time the fuel system and like the VW on the automotive side, working on the CAT 3116 requires special tooling you can only buy from Caterpillar. Typically, it costs up to $5000 in tooling to work on the 3116.

Is the Caterpillar 3208 Catepillar still in service?

Although the 3208 has been discontinued (1999) there are many still in service; the most popular applications for these engines are listed below: The Caterpillar TA 3208, 375 HP will drive a 13T boat along at 35 knots. Marine applications include main and auxiliary engines on the following vessels.

What is the compression ratio of a Caterpillar 3208?

The compression ratio for the 210- and 375-horsepower versions of the 3208 is 16.5:1. The compression ratio of the 435-horsepower version is 15.5:1. The 3208 has a forged steel crankshaft, and early versions had a cast iron camshaft, which was replaced with a steel camshaft in later versions.

When did the Catepillar marine engine go out of production?

Unfortunately, the engine was a bit of a gas guzzler and failed to meet the new internal combustion exhaust emission laws which were due to come into force in the new millennium; therefore it was discontinued in 1999.

Why did my OT-Cat 3208 diesel engine die?

So, the thing kinda wanted to start, not a lot of white smoke but a puff once and a while, this thing shuts off with a cable, you pull the cable to shut off fuel thus killing the engine. The cable slipped in the lever and wouldn’t let fuel into the injectors.

How do you start an OT-Cat 3208 diesel?

You will notice there is a little round knob on it that you can unscrew until you can pull the knob up about 1 1/2 inches or so. That is a priming pump. Next time you go to start it, pump the thing up till you are sure you have fuel pressure to the injector pump and then give it a try at starting.

Why did Cat stop making the Turbo Cat 3208?

Cat quit making the 3208 because it was too “dirty” in the emissions department, not because it wasn’t a good engine for them. Now, to answer the question about how much power you can get out of one, Cat has pulled 435 HP out of that engine easily.

Why is a 3208 engine called a disposable engine?

This is what the original post was asking about. A 3208 will make WAY more than 600 hp if you spent money on it, just like a DT466. 3208s are called “disposable engines” because they are parent bore blocks and for no other reasons. Disposable because when one is worn out you take it out and replace it with a reman.

Why does my cat engine won’t start?

Cat Engine Won’t Start Troubleshooting. Diesel Engine Crank No Start. – YouTube Cat Engine Won’t Start Troubleshooting. Diesel Engine Crank No Start. If playback doesn’t begin shortly, try restarting your device.

What kind of engine does a cat 3126 have?

I have a 3126 in a 2004 Ford that was running fine when I parked it. Tried to start it after is sat for a couple of weeks. The engine cranks like it should but makes no signs of starting.

Where are the oil holes on a Cat 3208?

If you use an 8-bolt flywheel on a 10-bolt crankshaft, be sure to install two plugs with sealer into the unoccupied holes or you will leak oil badly. There is a somewhat unique oiling to this crankshaft the connecting rod oil holes join to one common oil passage coming from the main journal to the rear of it.

How tall is the fuel injector on a Cat 3208?

There have been three fuel injectors used on the 3208 engine (as shown in Figure 10). The one on the far left is referred to as the “S” injector because it was the injector used on the “40S” serial number series engines. You must use the hold down shown with this injector. It is .500˝ tall with a smooth OD of the spacer barrel.

What are the torques of a Cat 3208 engine?

CATERPILLAR 3208 Essential Diesel Engine Bolt Tightening Torques. 1 Step 1 = 40 Nm, 30 lb.ft. 2 Step 2 = +120 degrees. CAT 3208 Connecting Rod Bolts. 3 Step 1 = 40 Nm, 30 lb.ft. 4 Step 2 = +60 degrees. CAT 3208 Cylinder Head Bolts. Bolts with 7 dash Marks. 5 Step 1 = 80 Nm, 60 lb.ft.

How much does A 3208 lb cat weigh?

CAT 3208 Weight approx: 3208 N/A – 1592 lb, 722 kg 3208 T – 1702 lb, 772 kg 3208 TA – 1982 lb, 899 kg

What kind of engine does a Ford 8000 have?

STOCK #B222, 1977 Ford 8000 Pierce Aerial Fire Truck, 45,612 Miles, Steel Telesquirt B5042 Body, 50′ in Length, Caterpillar 3208 Engine, 210hp, 5 Spd. Allison Transmission, Spring Suspension, S-Ca… See More Details 1971 Ford 8000 CALL FOR PRICING.

When was the ISC 8.3 engine put into production?

Cummins ISC 8.3 L Engine, Originally Put into production: 1998. Image Courtsey of Cummins® Inc. If you cast your mind back to 1998 you may think of the Monica Lewinsky/Bill Clinton scandal, Good Will Hunting winning the best picture Oscar or the Denver Broncos winning the Super Bowl.

How much power does a Cat 3208 have?

Can You rebuild a Cat 3208 engine core?

One doen’t throw away a Cat 3208 block that has worn cylinder bores. It gets bored out to the next standard over size and rebuilt with readily available Genuine Cat parts. Or, trade it in as a core for a Cat Reman engine. I disagree. We have owned many Cat engines in trucks and construction equipment and I’d never own a 3208.

Which is better a Turbo Cat 3208 or a DT466?

The DT466 is a great engine. They have a gigantic lower end in them. But the 3208 is a great engine as well. I think that a 3208 would fit better in a F350 than a DT466 would. It’s a shorter engine. Have you ever seen a DT466 stuffed into a pickup? I haven’t. I did see a 8.3 liter Cummins in a 1987 F350.