What was the name of the 1990 Chrysler Concorde?

The chassis design was continually refined throughout the following years, as it underpinned more Chrysler prototypes: the 1989 Chrysler Millennium and the 1990 Eagle Optima. By 1990, it was decided that the new technologically advanced car would need a new technologically advanced engine to power it.

What was the horsepower of the Chrysler Concorde?

The 3.3 L engine had 153 hp (114 kW) from 1992 to 1993 and 161 hp (120 kW) in the remaining years of the first generation. Both 3.3 L engines were rated at 18/21/26 MPG.

When did the second generation Concorde come out?

The Concorde was completely redesigned for the 1998 model year. The “Second Generation” design was introduced in 1996 as the Chrysler LHX concept car.

Is the Chrysler Concorde related to the Dodge Intrepid?

The Concorde was related to the Chrysler/Dodge Intrepid, Eagle Vision, Chrysler 300M, Chrysler LHS, and the eleventh and final generation Chrysler New Yorker. It was on Car and Driver magazine’s Ten Best list for 1993 and 1994.

The Concorde was completely redesigned for the 1998 model year. The “Second Generation” design was introduced in 1996 as the Chrysler LHX concept car.

What kind of transmission does a Chrysler Concorde have?

The chassis itself became a flexible architecture capable of supporting front or rear-wheel drive (designated “LH” and “LX” respectively). The transmission was inspired by the Premier’s Audi and ZF automatics. Borrowing heavily from Chrysler’s A604 (41TE) ” Ultradrive ” transversely mounted automatic, it became the A606 (also known as 42LE).

Where are the tail lights on a Chrysler Concorde?

The Concorde’s rear fascia was highlighted by a full-width and full-height lightbar between the taillights, giving the appearance that the taillights stretched across the entire trunk. In keeping with its upscale position, Concorde’s body side moldings incorporated bright chrome (later golden colored) work not found on its Dodge or Eagle siblings.

What kind of grille does the Chrysler Concorde have?

The Concorde featured a modern take on Chrysler’s signature waterfall grille. It was split into six sections divided by body colored strips with the Chrysler Pentastar logo on the center strip. The Concorde’s rear fascia was highlighted by a full-width and full-height lightbar between the taillights,…

What was the difference between the Concorde and the Intrepid?

The interior of the Concorde was also nearly identical to that the Vision, the main difference being the Concorde’s faux wood trim and steering wheel emblem; the Intrepid’s interior was substantially different from the Concorde and Vision.

The 3.3 L engine had 153 hp (114 kW) from 1992 to 1993 and 161 hp (120 kW) in the remaining years of the first generation. Both 3.3 L engines were rated at 18/21/26 MPG.

What did power steering do to a Chrysler Concorde?

A front split bench seat with twofold-down arm rests with cup holders and column shift became available to make it a six-seater. Power steering added more assist, to reduce turning effort for parking but delivered greater feel at higher speeds.

When was the last year the Chrysler Concorde was made?

The Concorde, 300M, and Intrepid were discontinued in 2004. The all-new, rear-wheel-drive Chrysler 300 replaced the Concorde (and 300M) in late 2004 as a 2005 model.

What was the price of a 2000 Chrysler Concorde?

Nice Big Old Luxury Car from the year 2000. It cost $26000 in the year 2000. They don’t make them like this anymore. What a deal! Read full review The 2000 Chrysler Concorde has not been tested.

What kind of engine does the Chrysler Concorde have?

The LX comes with a 200-horsepower, 2.7-liter V-6 and the LXi with a 225-horsepower, 3.2-liter V-6. Both come with a four-speed automatic transmission. Anti-lock brakes and traction control are standard on the LXi and optional on the LX. In addition to its eye-catching styling, the Concorde is roomy, functional and enjoyable to drive.

Is the Dodge Intrepid the same as the Chrysler Concorde?

Though the Concorde and Intrepid are the same car under the skin, the Chrysler division of DaimlerChrysler offers near-luxury and upscale family models, while the Dodge division caters to buyers looking for sportier attributes.

What was the average speed of the 1993 Concorde?

However, the Overhead Travel Information System (OTIS), or on-board computer with integrated map lights, was retained. A notable achievement included the Center for Auto Safety ranking the 1993 Concorde as superior in crashworthiness after testing it at 35 miles per hour (56.3 km/h) into a wall.

When did the second generation Chrysler Concorde come out?

In this article, we consider the second-generation Chrysler Concorde / LHS, produced from 1997 to 2004. Here you will find fuse box diagrams of Chrysler Concorde 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout).

Who was the designer of the Chrysler Concorde?

The Concorde’s design can be traced to 1986, when designer Kevin Verduyn completed the initial exterior design of a new aerodynamic concept sedan called Navajo. The design never passed the clay model stage. Also at this time, the Chrysler Corporation purchased bankrupt Italian sports car manufacturer Lamborghini.

Where are the fuses located on a Chrysler Concorde?

Overhead Console, Garage Door Opener, Trunk, Overhead, Rear Reading, and Visor Vanity Lights, Trunk Release Solenoid, Power Mirrors, Power Door Locks, Body Control Module, Aspirator Motor A Power Distribution center is located in the engine compartment. This center contains fuses and relays for circuits that operate only under the hood.

Can you add Freon to a Chrysler Concorde?

The A/C system in your Concorde consists of a compressor that is belt-driven, an evaporator and freon. If there is a problem with your compressor or evaporator, adding freon will not restore cooling. How to add freon to your 2002 Chrysler Concorde: hook up the can of refrigerant (likely r-134a) to the low pressure port.

What kind of paint did the Chrysler Concorde have?

In keeping with its upscale position, Concorde’s body side moldings incorporated bright chrome (later golden colored) work not found on its Dodge or Eagle siblings. On Concordes with gray lower body paint color, the gray came all the way up to the chrome beltline; on Visions the gray lower body paint area was smaller and much more subtle.

Where can I buy a Chrysler Concorde in Canada?

Chrysler Concorde | Kijiji in Ontario. – Buy, Sell & Save with Canada’s #1 Local Classifieds.

What kind of engine did the Chrysler Concorde have?

Design background. Until that time, the only engine confirmed for use was Chrysler’s 3.3 L pushrod V6. The 3.3 L engine’s 60° block was bored out to 3.5 L, while the pushrod-actuated valves were replaced with SOHC cylinder heads with four valves per cylinder, creating an advanced 3.5 L V6.

Why was the Chrysler Concorde discontinued after 1992?

This sleek styling gives the Concorde a low drag coefficient which was ahead of its time. Although American Motors’ Eagle Premier (and Dodge Monaco) was discontinued by Chrysler after the 1992 model year, the new Concorde’s packaging was derived from the Premier, and all the suspension and drivetrain development mules were Premiers.

What kind of engine does a 1993 Concorde have?

A notable achievement included the Center for Auto Safety ranking the 1993 Concorde as superior in crashworthiness after testing it at 35 miles per hour (56.3 km/h) into a wall. 1993: Base 3.3 L engine had 153 hp (114 kW) and standard non-touring suspension.

What’s the difference between the Chrysler Vision and Concorde?

The Concorde was given a more traditional image than the Vision. The two shared nearly all sheetmetal in common with the main differences limited to their grilles, rear fascias, body side moldings, and wheel choices. The Concorde featured a modern take on Chrysler’s signature waterfall grille.