What type of transmission fluid goes in a 2006 Ford Explorer?

What type of transmission fluid goes in a 2006 Ford Explorer?

Mobil 1 Synthetic Transmission Fluid Dexron/Mercon 1 Quart.

Where is the transmission stick on a 2006?

First, locate the transmission dipstick, which can be found under the hood, in the engine compartment. Make sure you are locating the transmission dipstick and not the engine-oil dipstick; the transmission dipstick is usually further back in the engine bay, toward the firewall (the bulkhead at the front of the cabin).

When to change transmission fluid in Ford Explorer?

Ford recommends changing the fluid in your Explorer transmission every 90,000 miles–or sooner if the oil becomes burned, discolored or filled with metal, dirt or rust particles. Changing the transmission fluid will prevent premature wear of internal transmission parts and components.

How do you remove oil filter from Ford Explorer?

Lower the pan carefully over the drain pan and tilt the transmission pan to drain the rest of the oil. Then remove the transmission pan and gasket from the Ford Explorer. Unbolt and remove the filter from under the transmission using a ratchet, ratchet extension and socket. Also, remove the O-ring from the filter fitting if equipped with it.

What should I do if my transmission fluid is low?

Your car must be level when the fluid is checked and we therefore recommend having a mechanic with a hydraulic lift or underground bay check your transmission fluid. Any fluid leaks for this type of transmission should be treated by a mechanic. Hans Angermeier has produced over 100,000 videos showing drivers how to fix things on their cars.

Where do you check the transmission fluid level?

In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car. Your car must be level when the fluid is checked and we therefore recommend having a mechanic with a hydraulic lift or underground bay check your transmission fluid.