What to do if the engine light is on on a Ford Ranger?

Go to a garage to have the engine light of your Ford Ranger engine turned off. Second opportunity, as we told you in the previous section, nothing beats specialist advice on technical concerns such as those you face if the engine light on your Ford Ranger is on or flashing.

How to turn off the Check Engine light?

Note: Code reader is required to reset computer in order to turn off check engine light. Also, check engine light will continue to re-appear until ALL problems are fixed. Just check the codes each time for a diagnosis and go from there. 64 people found this helpful.

How long does it take for the Check Engine light to reset?

How long does it take for the check engine light to reset? If you are sure you have fixed the problem, it takes around 10-30 successful cycles before the check engine light disappears. One process is one cold-start until the engine is warm.

What does trouble code mean on Ford Ranger?

Hook up a scan tool and retrieve the DTCs (Diagnostic Trouble Codes) and go from there. Be aware that a trouble code doesn’t necessarily mean that a component is bad except in a few cases.

What does a check engine light mean on a 1999 Ford Ranger?

A check engine light can indicate a broad spectrum of problems with your 1999 Ford Ranger. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

Can a Ford Ranger engine be turned off?

However, some concerns can be important and lead to technical repairs that will be complex to accomplish without the help of a specialist. Go to a garage to have the engine light of your Ford Ranger engine turned off.

What should I do if my check engine light is on?

This will help your mechanic evaluate the issue. Steady Check Engine Light: If your check engine light is on every time you operate your Ranger, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.

What does your Ford check engine light mean?

What does your Ford check engine light mean? Ford dashboard warning lights are designed to alert you to any issues or malfunctions with a variety of vehicle parts and systems. For instance, when your Ford check engine light comes on, it can mean a few different things. Is your gas cap loose or broken?

Are there any problems with the Ford Ranger?

Ford Ranger owners have reported 26 problems related to check engine light on (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Ford Ranger based on all problems reported for the Ranger.

Why does the camera not work on a Ford Ranger?

• If the cabin becomes extremely hot (parked under direct sunlight for example) the camera may not function until cooled. • Different tyres / tires that alter ride-height may impair operation. The Ford Ranger auto start stop dashboard light illuminates when the engine has automatically stopped. The light flashes when the engine needs to restart.

Where is the Check Engine light on a Ford Ranger?

If your Ford Ranger is having a service problem, the engine warning light will let you know virtually immediately. The Check Engine light is located on the lower left side below the dashboard.

Why is your Ford check engine light on?

Why is Your Ford Check Engine Light On? – YouTube Why is Your Ford Check Engine Light On? If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What is the engine code on a Ford Ranger?

The code was p0316 which indicates too many misfires after startup and code p0304 which is cylinder number 4 misfire. Needless to say I had drivers behind me honking and flashing lights but the truck just wouldn’t go over about 5 mph until I was down the road a bit.

Where can I find the Check Engine Light code?

These are listed in numerical order for easy searching. When retrieving Ford check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.

What happens if your check engine light goes off?

It sends data to the vehicle’s computer, which uses it to regulate the mixture of air and fuel that enters the cylinders. An engine will keep running even if an O2 sensor needs to be replaced, but it will burn more fuel than usual. In the long run, a bad O2 sensor can damage components like the spark plugs and the catalytic converter.

What causes a flashing check engine light on a Ford Ranger?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Ranger’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped .

What causes a Ford Ranger engine to misfire?

Fuel Mixture: If the engine is running rich or lean, the engine will misfire and throw the fuel mixture related codes, such as P0171, P0172, etc.. Injector Issues: A bad fuel injector (s) can cause a misfire.

When does the Check Engine light reset itself?

Reset onboard diagnostic computer. If you are sure that you have fixed the problem that the Check Engine light was showing up for, the engine light will reset itself after 10-20 successful cycles. A cycle is when the car is cold and started until it’s at operating temperature.

Why does the Check Engine light keep blinking?

When the ECU ( engine control unit) detects a problem that it is unable to regulate, it then turns on the check engine light on your dashboard. This check light will either keep on glowing or will blink, depending on the nature of the fault. If the engine check is on regularly then it means that there is a problem but not an emergency.

What to do if your engine light is on?

Engine Light Is On: 1998-2005 Ford Ranger – What to Do – 1999 Ford Ranger XLT 4.0L V6 Extended Cab Pickup (4 Door) This free video provides the steps to diagnose and clear a check engine light on a 1999 Ford Ranger XLT 4.0L V6 Extended Cab Pickup (4 Door).

Why does my check engine light keep resetting itself?

The engine light should have reset itself for most cars, but if it persists, it could mean that your car has other serious issues that need mechanical assistance. Most cars have a self-correcting mechanism for resetting the engine light. The simplest way to reset the engine light is to drive the car with the light on for several miles.

Are there any recalls on 2004 Ford Ranger?

The 2004 Ford Ranger models have a total of eight recalls and 462 complaints according to Car Complaints. The issues with this model largely have to do with engine troubles and misfires. One owner of a 2004 Ford Ranger in California experienced engine stalling and misfires.

What are the features of a Ford Ranger?

The Ranger offers athletic hauling and towing and has an engine that’s efficient and powerful, which is what most truck fans are looking for. The Ford Ranger handles well, gets great gas mileage, and has a cozy interior. There are enough features to make truck fans happy, including one of the most user-friendly infotainment systems in its class.

What’s the average service life of a Ford Ranger?

Instead, you can extend the service life of your vehicle by regular inspection, thorough body washes, and adequate servicing. Once you do this, your truck will last as long as 300,000 miles. Take, for instance, a 1994 Ford Ranger owner, Hank. Hank’s truck has lasted 325,000 miles.

Where was the 2004 Ford Ranger Edge purchased?

No accident or damage reported to CARFAX. Purchased on 10/03/04 and owned in OH until 04/19/21. Driven an estimated 6,167 miles/year. Last serviced at 94,039 miles in Miamisburg, OH on 03/19/19 • Veh…

When was the last serviced Ford Ranger edge?

Last serviced in Owens Cross Roads, AL on 03/05/21 • Vehicle serv… No accident or damage reported to CARFAX. Purchased on 11/20/04 and owned in PA until 05/17/21. Driven an estimated 6,781 miles/year. No accident or damage reported to CARFAX.

How do you clear the engine code on a Range Rover?

Turn on the OBD scan tool and turn the Range Rover’s ignition to the “II” position. Press “clear” on the OBD scan tool to clear the engine codes, and turn off the Range Rover’s Check Engine light.

What to do if your check engine light turns off?

The Check Engine Light will turn off if all error codes are cleared. Some scan tools have many capabilities such as freeze frame that notes some sensor readings when a code was set and removing the codes will also remove this file. Note: In some scanners, they might have an automatic option and a “CLEAR” or “YES” button instead of “ ERASE” button.

How to reset check engine light with OBD-II?

1 Connect the scan tool to the OBD – II Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column. 2 View error codes by pressing the “READ” button Pressing the “READ” button on the scan tool to see the error codes of the engine. 3 Remove the error code

What does the Check Engine light mean on a Ford Ranger?

The Check Engine light is an indicator from the Powertrain Control Module (PCM) that something is out of specs within the computer controlled system. Hook up a scan tool and retrieve the DTCs (Diagnostic Trouble Codes) and go from there. Be aware that a trouble code doesn’t necessarily mean that a component is bad except in a few cases.

Is there a way to reset the Check Engine light?

Using a scan tool is the easiest way for check engine light reset. If you wonder to know how to turn off check engine light by this way, here are 3 steps for you. Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column.

Hook up a scan tool and retrieve the DTCs (Diagnostic Trouble Codes) and go from there. Be aware that a trouble code doesn’t necessarily mean that a component is bad except in a few cases.

What to do if the engine light is on on a Ford Ranger?