What size tractor do I need to lift round bales?
What size tractor do I need to lift round bales?
If you want to move 5×5′ round bales, realistically you’re looking at a 5 series tractor. The size also makes them good for working in the woods, as they have great ground clearance and enough mass to remain more stable than some smaller tractors.
What size Kubota tractor can lift a round bale?
From my experience (and advice from others) 40hp is the minimum for handling round bales of that size with appropriate counter-weight.
What machine picks up hay bales?
Bales may be picked up from the field and stacked using a self-powered machine called a bale stacker, bale wagon or harobed. There are several designs and sizes. One type picks up square bales, which are dropped by the baler with the strings facing upward.
How much horsepower does it take to lift a bale of hay?
Most standard square balers on the market require 35 horsepower at your tractor’s PTO, and a minimum tractor weight of around 3000 pounds.
Can a 1025r move a round bale?
Round bales typically come either 4′ or 5′ wide and either 4′, 5′ or 6′ in diameter. A 4’x4′ round bale should weigh right about 575 lbs and can be moved with a 2023R. If you use a 3pt bale spear it shouldn’t be a problem to pick one up and drive it to where you need it.
Will a Kubota L3901 lift a round bale?
New member. Gillham Ar. Ya I would say that the L3901 is pretty much the same as the L3800 lift wise . And a round bale will be pushing it on the front .
How much does a large bale of hay cost?
Hay bales by the ton.
| Hay grade | Bale type | Min. price/ ton |
|---|---|---|
| Large square | $160 | |
| Large round | $120 | |
| Grade 1 | Small square | $160 |
| Large square | $120 |
Can you cut hay with a combine?
No. A combine is designed to harvest dry stalks that have seeds at the top. For hay you are cutting green stalks, which is very different. A hay baler could harvest oats but a combine cannot harvest hay.
How many round bales should I feed my horse?
If you feed large round bales from October through May (8 months or 240 days), you will need 12,000 pounds of hay for two horses. The average 4′ x 5′ grass large round bale should weigh 850 pounds. 12,00 pounds divided by 850 pounds equals 14 large round bales.
Can a John Deere 3032e lift a round bale?
It’ll handle it. No problem. Use something for rear ballast so you don’t overload your front end.
How does a scissor high lift hay bale work?
The Scissor High Lift will raise a hay bale higher to load onto truck beds, field wagons or double stack in the field or barn. It is made of rugged 4 x 4 inch square tubing with a heavy pivot pin. It easily attaches to the #3F hay spear. A top link or cylinder can be used, which allows for the bale to be leveled when stacking.
Which is the smallest tractor to lift round bales?
It’s also a four wheel drive / assist so the front axle is pretty scoocum as well. Keep in mind that the problem you’ll have with a smaller tractor is not only the weight of the tractor but also the lifting capacity of the front end loader.
What’s the average weight of a hay bale?
Hay bales can weigh between 40 lbs and 2,000 lbs. They come in two basic shapes, round and square. Round hay bales are usually quite large and weigh from 600 to 1,200 lbs. Square hay bales come in two size groups, small and large. Most small square bales can be handled manually.
How big is a 3 point hitch scissor Hay lift?
It is made of rugged 4 x 4 inch square tubing with a heavy pivot pin. It easily attaches to the #3F hay spear. A top link or cylinder can be used, which allows for the bale to be leveled when stacking. The High Lift is equipped with Category II pins but will accept Category I pins with a 7/8 inch shank. The #3F hay spear is rated up to 1500 lbs.
How big is a 3 Point Hay mover?
Washburn’s builds heavy duty 3 point hay bale movers for both pin on style 3 points and quick coupler quick hitches. These are available in 1, 2, 3, 4 spear bale hay movers. We can custom build to get you what you want We use our cross bolt spears in all of out 3 pt hay bale mover units Spears are available in 33″, 39″, and 48″ overall length.
The Scissor High Lift will raise a hay bale higher to load onto truck beds, field wagons or double stack in the field or barn. It is made of rugged 4 x 4 inch square tubing with a heavy pivot pin. It easily attaches to the #3F hay spear. A top link or cylinder can be used, which allows for the bale to be leveled when stacking.
Where can I get a tractor to lift round bales?
The Mahindra dealer/repair shop is 4 miles away. Kubota, JD, Case are about 30 miles. In the end, just looking for the best machine for the job. Anyone have first hand experience with round bales and smaller tractors that could be shared? I have just purchased my first small farm of 13 acres.
How big can a hay bale be on a tractor?
What size bales 800 lbs, 1000, 2000. I once bought bales too big for my tractor and could only push them off the trailer. Most new hydraulics will lift more than the tractor can balance, be careful. Thanks for all the replies.
