Easy tips

What should I replace the second clutch on my Impala?

What should I replace the second clutch on my Impala?

Replace the second clutch (5) steel plates (625) (24204104), (6) fiber plates (624) (24205361), and (2) oil sealing rings (613) (24209498). Refer to GM unit repair service manual for the year and model of the vehicle being serviced for the 2nd clutch service procedure.

What kind of acceleration does an impala have?

So I bought my 07 3.5 LT in January, and quickly noted that i thought it accelerated kind of crappy when cold and at moderate acceleration. I did a TON of research and a lot of impala owners have this problem, along with a bunch of other GM cars.

Is there a TSB for a GM Impala?

The TSBs they have are all just from GM, any GM tech can access the TSB without needing Alldata. This bulletin is being revised to update model years. Please discard Corporate Bulletin Number 06-07-30-023D (Section 07 – Transmission/Transaxle). Some customers may comment on a 1-2 shift shudder at light to moderate acceleration.

How do you remove solenoid valve from impala?

Remove ONLY the Case Cover-to-Case bolts to remove the Case Cover and Valve Body from Transmission Case AS AN ASSEMBLY. To access all Case Cover-to-Case bolts, it is necessary to remove the Pressure Control Solenoid Valve Assembly (322), and 1-2 & 3-4 Shift Solenoid Valve Assemblies (315A, 315B).

What does ALLDATA do for a GM Impala?

Alldata is an aftermarket service informstion provider. The TSBs they have are all just from GM, any GM tech can access the TSB without needing Alldata. This bulletin is being revised to update model years. Please discard Corporate Bulletin Number 06-07-30-023D (Section 07 – Transmission/Transaxle).

Replace the second clutch (5) steel plates (625) (24204104), (6) fiber plates (624) (24205361), and (2) oil sealing rings (613) (24209498). Refer to GM unit repair service manual for the year and model of the vehicle being serviced for the 2nd clutch service procedure.

Is there a bulletin for acceleration hesitation in Impala?

While it is common, it is not “normal” Well, it ended up needing the second clutch pack and solenoid replaced. There is actually a bulletin in Alldata. When i took it to the dealer the mechanic couldnt duplicate what i was talking about. But the dealer was very helpull and offered to do the Bulletin fix anyways under warranty.

What’s the throttle plate angle on an Impala?

Please discard Corporate Bulletin Number 06-07-30-023D (Section 07 – Transmission/Transaxle). Some customers may comment on a 1-2 shift shudder at light to moderate acceleration. Typically, the throttle plate angle parameter is 12-20% at time of condition with vehicle speed of approximately 24-40 km/h (15-25 mph).

Remove ONLY the Case Cover-to-Case bolts to remove the Case Cover and Valve Body from Transmission Case AS AN ASSEMBLY. To access all Case Cover-to-Case bolts, it is necessary to remove the Pressure Control Solenoid Valve Assembly (322), and 1-2 & 3-4 Shift Solenoid Valve Assemblies (315A, 315B).

Author Image
Ruth Doyle