What rear end will fit a 66 Mustang?
What rear end will fit a 66 Mustang?
A stock V8 5-lug 8- or (rare) 9-inch rear end from a ’65/’66 Mustang, Falcon, Comet would fit. Another choice would be a 9-inch rear end from a ’57-’59 Ford/Mercury/Lincoln big car. These have the very same perch and housing widths as the ’65/’66 Mustangs, and they also have the very same size axle bearings.
What rear end will fit a 1965 Mustang?
A narrower ’65/’66 Mustang 8 or 9-inch rear end, or an 8 or 9-inch Granada/Monarch rear end can be installed in a ’67-’70 Mustang, you will just have to size the backspacing of the wheels, accordingly, for the narrower rear end width.
What kind of rear axle does a Ford Mustang have?
All 79-04 Ford Mustang Rear Ends used 28 spline axles except for the 2001 and 03-04 SVT Cobras – they used a 31 spline axle in their IRS rear end. The 2005-2010 V6 Mustangs with a Ford 7.5 rear end used 28 spline rear axles whereas the 2005-2010 V8 Mustangs with 8.8”rear ends used 31 spline rear axles.
How big are the rearends on a 1967 Mustang?
Currie ® Ford 9-inch rearends for 1967 thru 1970 Mustang and Cougar, provide a direct bolt-in solution for those looking to upgrade the rearend of their classic muscle car or restomod build.
Where can I buy a 1966 Ford Mustang?
Ford has licensed the actual body design of the original Mustang (the body that was on the ’64 1/2 to ’66 models) to a Florida-based company called Revology Cars.
What kind of axle do you need for disc brakes on a Mustang?
If you are looking to upgrade to a disc brake setup from a 94-04 Mustang, you are going to need the SN95 flange axles along with a set of caliper brackets. The SN95 flange axles are hubcentric to allow a perfect fit with the 94+ rotors. A popular swap among Fox Body owners is the 94-98 rear end swap.
How big is the rear axle on a 66 Mustang?
I have a 66 coupe with an 8″ and it measures 57 1/4″ and the rear I pulled out of a 67 Falcon measures at 59 1/4″-same as a 67-68 Mustang. I bought it to run Late model wheels on the car. I found out later the spring perch width is wider on the Falcon rear than the Mustang.
How big is the rear axle on a 67 Falcon?
Sorry I don’t know the width of a 67 Falcon. There was a rear axle dimension chart in July ’04 Mustang & Fords Mag. Shows ’65-66 Mustang & ’66-70 Falcon exactly the same dimensions — 57-3/8″ flange to flange & 43″ center to center of spring perch.
How big are the rear axles on a tri-five?
Crate Axles – Fully assembled, vehicle-specific, bolt-in 9-inch rearends configured with the most popular gear ratios, differential types, brake packages, and finish to make ordering a breeze while keeping lead-times to a minimum
Are there rearend builders for Crate axles?
Rearend Builders – All the features of a Crate Axle, with the benefit of additional gear ratio options, differential types, gear polishing, finish colors, and more. So, if you’re looking for something just a little off the beaten path, but still want the bolt-in simplicity of a Crate Rearend, give the Rearend Builder a try
