What kind of transmission does a 1996 Chevy k1500 have?

There are 16 Transmission Assembly choices for the 1996 Chevrolet K1500 Pickup!!! Select one…

What kind of transmission does a Chevy truck have?

THM700-R4 – 4 Speed transmission used in GM cars and light trucks with the 2.8, 3.1, 4.3, V6, Chevrolet built 305, 350 and 454 engines from 1982 to 1992.

When did GM stop making their own transmissions?

Through the 1950s, all makers were working on their own automatic transmission, with four more developed inside GM alone. All of GM’s early automatic transmissions were replaced by variants of the Turbo-Hydramatic by the 1970s. 1968-1971 Torquedrive – Chevrolet ( Camaro and Chevy II, Nova.

What kind of transmission does a Chevy c1500 have?

Restore your truck to its might with new Chevrolet C1500 automatic transmission parts from AutoZone. The automatic transmission for Chevy C1500 takes control of shifting the gears so your focus stays on maneuvering your pick-up.

There are 16 Transmission Assembly choices for the 1996 Chevrolet K1500 Pickup!!! Select one…

THM700-R4 – 4 Speed transmission used in GM cars and light trucks with the 2.8, 3.1, 4.3, V6, Chevrolet built 305, 350 and 454 engines from 1982 to 1992.

What was the name of the first GM automatic transmission?

All of GM’s early automatic transmissions were replaced by variants of the Turbo-Hydramatic by the 1970s. 1940–1967 Hydra-Matic — Oldsmobile (now the trade name for all GM automatic transmissions) 1948–1963 Dynaflow — Buick. 1950–1973 Powerglide — Chevrolet (also used by Pontiac, Holden, Vauxhall and Opel)

What kind of truck has a 4L60E transmission?

It can cause quite the headache. When the 4L60E went into production, it was being put behind the small-block Chevy and many smaller V6’s, predominantly in pickup trucks, Camaro, Corvette, Impala, Caprice, and so on.

How much fluid does a GM 4L60E need?

The 4L60E transmission weighs 146 pounds dry, and 162 wet. It requires 8.4 quarts (9.64″ torque converter) or 11.4 quarts (11.81″ torque converter) of transmission fluid, Below is a list of common transmission problems with the GM 4L60E Transmission and possible solutions to repair.

When did the 4L60E go out of production?

By the time it started getting phased out of most pickup trucks in 2008, the 4L60E there was no SBC or any other motor from the early nineties in regular production. It was going behind the LS based motors or the longitudinal six cylinder found in the Trailblazer. That’s a lot of time for one transmission to be in production.

When did the GM 4L60 E transmission come out?

The 4L60-E is the “E”lectronically shift controlled version of the 4L60. The Late 4L60-E was released in 1997 in and fully phased into wide use through GM by 1998 in both RWD car platforms (including the C6 Corvette) and trucks in both 2wd and 4wd configurations.

Why is my Trans bad on my 4L60E?

Trans seems noisy when moving in 1st and Reverse, noise goes away instantly if you shift to N or the transmission goes into 3rd gear: Reaction planetary is worn out due to high miles or insufficient lubrication. Not a critical failure, but not a good sign either.

Is the Pan bolt pattern the same on all 4L60E transmissions?

The transmission pan bolt pattern is the same, regardless of the year that the 4L60E was made. They have the same gearing, regardless of what year or model that they are from, so you don’t need to worry about that. One of the main differences in the earlier and later 4L60E transmissions is the bellhousing area.

How much does a GMC k1500 automatic transmission cost?

Shop AutoZone for GMC K1500 Automatic Transmission. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Your GMC K1500 is a full-size pick-up that offers unbeatable dependability and capability in a number of challenging towing and hauling situations.