What kind of engine does a 1989 GMC Sierra have?

The 1989 Sierra C/K 2500 is designed for medium-duty use and provides a greater payload and towing capacity than the 1500 series. Powering the Sierra 2500 is the same engine found in the 1500, either a 126-horsepower diesel V-8 or a 160-horsepower V-6.

What are the specs of a GM 4.3 liter V6?

GM 4.3L V6 Vortec LU3 Engine Specs. Type: 4.3L Gen1e V6 (LU3) Displacement: 4300cc (262 ci) Engine Orientation: Longitudinal. Compression ratio: 9.2:1.

What kind of engine does a GM Truck have?

The 4.3L V6 Vortec LU3 is an engine produced by General Motors for use in full-size light-duty pickup truck and vans.

How old was my Chevy truck when it died?

Had it towed to a friends where we pulled out the Chilton book and began troubleshooting. First thing we replaced was the fuel filter. It was 9 years old and when we blew into it there was a lot of restriction. After that we ran through the tests under Fuel Pump.

What causes a GMC Jimmy 4.3 engine to die?

Gmc jimmy 4.3 will sometimes die while driving in highway when i let off the accelorater pedal. my 95 blazer when coming to a stop and braking it idles high and rough sounding and it sputters and will clink and clank as stoppung and almost dies no engine light on what could be causing this. Your engine may have a vacuum leak.

When did the Chevy 4.3 liter V6 come out?

Creative Crop/Digital Vision/Getty Images The 4.3-liter Vortec Chevy V6 was the first Vortec engine ever made in 1986 and was used in GMC and Chevy trucks. The engine boasted 155 horsepower when it first appeared. The engine is based on what General Motors calls Vortex technology.

How long does a Chevy 4.3L Vortec engine last?

3 vortec is a very strong and reliable motor, proven by it being the longest lasting production vortec engine. Generally, these engines are extremely capable of lasting up to 300,000 miles.

How much horsepower does a C / K 1500 have?

The 4.3-liter V-6 is rated at 160 horsepower and 235 foot-pounds of torque. The 6.2-liter V-8 produces a maximum of 126 horsepower and 240 foot-pounds of torque. The only available transmission is a four-speed automatic with overdrive. The C/K 1500 comes in two cabin types: regular and extended.

What’s the weight of a GMC Sierra 1500?

The only available transmission is a four-speed automatic with overdrive. The C/K 1500 comes in two cabin types: regular and extended. The curb weight varies between 3,692 and 4,912 pounds, depending on the Sierra’s options, engine and trim.

How big is a GMC Sierra 1500 marquee?

The 1500 marquee represents a 1/2-ton pickup truck, the 2500 is a 3/4-ton truck and the 3500 represents a 1-ton truck. The weights do not refer to the trucks themselves but the maximum payload ratings.

What kind of engine does a 1989 Chevy C / K 1500 have?

Newly Listed. 1989 Chevrolet C/K 1500 Series – K1500 Cheyenne $191/mo*. Monthly Payment. Used. 270,000 Miles. Email for Mileage. Specs 5.7L V8. Automatic 4-Speed.

What kind of engine does a GMC pickup have?

This engine was designed as a direct replacement for 1987-1995 Chevy & GMC pickups, SUV’s, and van applications. These vehicles featured a 350 ci, 5.7 small block Chevy with TBI (throttle body injected) EFI system and swirl port heads.

What was the Chevy C / K pickup truck in 1990?

A 454 SS muscle truck arrived in 1990, with a performance/handling package. The 7.4-liter V8 engine was revised, and could be mated to a 4-speed automatic instead of the prior 3-speed. In the 454 SS, that engine now made 255 horsepower–25 more than in 1990. Sportside trucks with the flare-fendered cargo box could have an extended cab this year.

What kind of drive does a Chevy C / K have?

All 4-wheel-drive models used Insta-Trac, an on-demand, part-time 4WD system. 4WD trucks had shift-on-the-fly capability and automatic-locking hubs. Four-speed manual gearboxes departed in 1992, when a 190-horsepower turbodiesel V8 debuted for heavy-duty use.

What kind of drive does a GMC Sierra have?

Before deciding, be sure to try all three. GMC’s Sierra and the nearly identical Chevrolet C/Ks had been redone as early 1988 models, in three series: 1500 (1/2 ton), 2500 (3/4 ton), and 3500 (1-ton). C pickups were 2-wheel drive; K indicated Insta-Trac part-time 4WD.

What kind of engine does a GMC Sierra 3500 have?

The second is a 7.4-liter V-8 generating 230 horsepower and 385 foot-pounds of torque. Available with an 8-foot bed, the Sierra 3500 has a curb weight ranging between 4,349 and 5,255 pounds.

How big is the bed on a GMC Sierra?

Extended-cab models had a 141.5-inch wheelbase with 6.5-foot bed, or a 155.5-inch wheelbase with 8-foot bed.The 6-passenger extended-cab (2500 only) had two full-width bench seats. A folding bench was available in other extended-cabs.

What are the specs of a GM 88-91 truck?

88-91 GM Truck Frame Specs 1 Body Styles. The two-wheel-drive C1500 and four-wheel-drive K1500 are 1/2-ton trucks with either a short 117.5-inch or longer 131.5-inch wheelbase. 2 Dimensions. The short wheelbase C1500 is 194.1 inches long, 76.4 inches wide (plus one-half inch for Sportsides/Widesides) and 70.4 inches tall. 3 Other Specs.

How tall is a two wheel drive GM Truck?

Body Styles The two-wheel-drive C1500 and four-wheel-drive K1500 are 1/2-ton trucks with either a short 117.5-inch or longer 131.5-inch wheelbase. The short wheelbase C1500 is 194.1 inches long, 76.4 inches wide (plus one-half inch for Sportsides/Widesides) and 70.4 inches tall.

What kind of truck was the GMC G-508?

The GMC CCKW, also known as “Jimmy”, or the G-508 by its Ordnance Supply Catalog nr, was a highly successful series of off-road capable, 2 1⁄2 -ton, 6×6 trucks, built in large numbers to a standardized design (from 1941 to 1945) for the U.S. Army, that saw heavy service, predominantly as cargo trucks, in both World War II and the Korean War.

What kind of axles does a GMC CCKW have?

Originally all axles were a Timken split type, later trucks also used GM “banjo” types. The CCKW had a ladder frame chassis with three driven beam axles, the front on leaf springs, the rear tandem on leaf springs with locating arms. There were two wheelbases, the short Model 352 and the long Model 353.

What’s the weight of a GMC Sierra 2500?

Powering the Sierra 2500 is the same engine found in the 1500, either a 126-horsepower diesel V-8 or a 160-horsepower V-6. The Sierra C/K 2500 is also available in regular and extended cab versions. The truck’s curb weight starts at 3,909 pounds and maxes out at 4,942 pounds, depending on options.

The 1989 GMC Sierra shares many components with Chevrolet pickups of the same era. There are three trims available: the 1500, 2500 and 3500. The model designations have either a “C” or “K” in front of them, which represent the truck’s drivetrain. Rear-wheel drive trucks are denoted with a “C,” and four-wheel drive models are represented with a “K.”

When did the GMC 6.2 diesel engine come out?

The engine was not turbocharged, and it used the same Standadyne DB-2 mechanical injection pump as the Oldsmobile V8 (which may account for the same crinkly-crunchy soundtrack and the rumors that the engines are related). The engine bowed in 1982, and was offered on Chevrolet and GMC pickups and Suburbans.

When did the GMC 6.5 diesel engine come out?

The 6.5 was offered both with and without turbochargers — and in order to bring the engine into compliance with new on-board diagnostic (OBD) standards, 1994 saw the exchange of the old DB-2 pump for an electronically-regulated DB-4. These engines powered GMC light trucks as well as the military HMMWV and its civilian counterpart, the Hummer H1.

What was the displacement of a 1989 Chevy 350?

All versions of the 350 had identical internal specifications. The bore — or cylinder width — was 4 inches and the stroke — or piston travel inside the cylinder — was 3.48 inches. They all calculated out to 5,737 cubic centimeters (cc) of displacement, or 350.093 cubic inches. MSN Autos: 1989 Chevy Suburban Specs.

How many horsepower does a Chevy 350 have?

In the G-30 HD van, the 350 produced 185 hp and in the Corvette, it produced 240 hp. Both of the Suburban’s 350s produced 300 foot-pounds of torque. The G-20 van produced 285 foot-pounds of torque. The highest of the bunch was the Corvette’s 350, producing 335 foot-pounds of torque.

What kind of engine does a 1989 Chevy 350 have?

Development The 1989 Chevy 350 engine falls under the L98 variants of the Chevy 350 engine. The L98 was introduced to the market in 1985 with a tuned-port injection (TPI). The Chevy L98 350 was a 5.7 liter, V8 engine with a displacement of 350 cubic inches. It was an internal combustion engine made with eight cylinders.

When did the Chevy 350 L98 come out?

The L98 was introduced to the market in 1985 with a tuned-port injection (TPI). The TPI improved the previous 350 engine’s performance up to 30 percent, improving its maximum power output that included torque, horsepower, and carburetion.

What kind of engine does a Chevy L98 have?

Although modified, these engines are just different variations of the 350 L98 engine. The Chevy L98 350 was a 5.7 liter, V8 engine with a displacement of 350 cubic inches. It was an internal combustion engine made with eight cylinders. It had a bore and stroke of 4-by-3.48 inches, and a compression ratio of 9.5 to 1.

What kind of car was the Chevy 350?

The 1989 Chevy 350 was a part of the engine family’s second generation, which was produced from 1962 until 1998. In 1989, the Corvette, the G30 van, and the Suburban has this engine. Because of the 350’s versatility in performance, it was installed in vehicles that ranged from a sport coupe to a full size van.

What was the problem with my GMC Sierra?

Injector for Cyl 8 replaced. Engine light had come on three times in 2 weeks but issue not resolved until third time in to check it and at that time a Head Office GM specialist of some kind happened to be there and determined the issue was an injector. Truck ran fine before the work.

What kind of engine does a GM pickup truck have?

GM 4.3 Liter V6 EcoTec3 LV3 Engine The LV3 V6 engine is produced by General Motors for use in pickup trucks. It is part of GM’s 5 th -generation Small Block engine design that’s named EcoTec3 in pickup trucks, replacing the 4 th -generation Small Block engine family known as Vortec.

What kind of engine does a 1989 GMC Sierra have?