What kind of engine does a 1962 Chevy 327 have?

Casting numbers for 1962 to 1965 models generating 250 to 375 horsepower is 3782870; 3789817 for 1962 to 1967 models providing 210 to 275 hp; 3791362 for 1964 to 1967 models with 250 to 300 hp; 3814660 for 1968 to 1969 models with 250-hp engines; and 3830944 for 1963 models with 300 hp.

How many models of Chevy 327 are there?

Buy 1966 the Chevy 327 was only produced in three different models because of the continuing popularity of the Chevy 396 and the introduction of the new Chevrolet 427 V8. Chevrolet however decided for 1967 to expand the lineup of 327 engines back to 5 different models like they had in 1965.

How much horsepower does a 327 V-8 have?

Back in the late 60s and early 70s the big block large displacement engines received the most attention. One of Chevrolet’s small block V-8 engines flew under the radar, because of its small displacement. However, with a horsepower rating of 350-375 the Turbo Fire 327 V-8 provides a lot of bang for the buck.

Is the Chevy 327 turnkeyengine a muscle car?

This engine would be GREAT in your Muscle Car, Street Rod, Kit Car, or Custom Truck. The smaller horsepower versions of this engine will run on unleaded fuel. This is a 2 bolt seasoned heavy duty Chevy small block. You can optionally upgrade to a 4 bolt heavy duty block.

When did the Chevy 327 V8 engine come out?

The Chevy 327 V8 was first introduced in 1962 and was available with four different horsepower options depending on what type of fuel delivery and performance setup was available.

What was the difference between 1965 and 1967 Chevy 327?

Chevrolet however decided for 1967 to expand the lineup of 327 engines back to 5 different models like they had in 1965. The only big difference was now the low end 327 came with a 2 barrel carburetor which severely lowered the horsepower for the engine.

How many horsepower does a 1968 327 have?

With the parts you have mentioned you can realistically make about 400-430 HP….you can call one of the cam manufacturers for a recommended cam (I prefer Bullet Cams) . Also, which heads do you have?

Where is the serial number on a 327 Chevy?

The 327 Chevy engine is stamped on a machined pad on the front passenger side cylinder head usually behind the alternator. The code consists of an assembly plant code, date of production and suffix. First letters of “F,” “S,” “K” or “T” denotes Flint, St. Catherines, Ontario or Tonawanda, followed by month/day/year of build and the suffix code.

What kind of engine does a 1962 Chevy C / K have?

1962 Chevrolet C10 Truck. 5.3 LS Motor with approximately 450hp. Included in LS rebuild is Doug Thorley ceramic coated headers, 92mm intake, stage 3 truck cam, 3″ exhaust with super 44 Flowmaster… More Info › 283 V-8 Arizona crate engine has 4100 miles on it.

What kind of truck was a 1962 Chevy C20?

1962 Chevrolet C10 short box pickup Solid truck: original body, original wood bed step side pick up: Rebuilt: 350 crate motor, 3 speed auto with shift kit (originally a 6 cylinder 3 speed) New: M… More Info › 1962 Chevrolet C20 truck. 327 motor, 4 speed transmission. The truck has some wiring issues as well as some rust issues.

How good is a 327 engine?

Rated at 375 hp, the fuel-injected 327 was a high-winding screamer, as satisfying to drive as any big-block. At the other end of the spectrum, the 327 was also offered at much more pedestrian power levels, as low as 210 hp (gross). Regardless of the original output, the 327 (like any small-block), is a solid foundation for a performance build up.

What is the HP on a 327 engine?

In its most powerful version, rated at 375 HP , the 327 CID boasted a 1.15 HP per cubic inch ratio . This represented the highest ratio of any factory assembly line engine built at that time. When compared to other powerful General Motors engines like the Pontiac Tri-power 389 , the 327 produced more horsepower and weighed less while doing it.

What is the bore size for a Chevy 327?

What made the 327 so efficient was its large (for a small-block), 4-inch bore that readily accepted big-valve heads, combined with the relatively short 3.25-inch stroke.

What is the cylinder bore on a 327 small block?

The 327 was only in production for eight years, but in that time the engine would become a legend among small-block aficionados. What made the 327 so efficient was its large (for a small-block), 4-inch bore that readily accepted big-valve heads, combined with the relatively short 3.25-inch stroke.

What are the casting numbers for a Chevy 327?

327 Casting Numbers Casting numbers for 1962 to 1965 models generating 250 to 375 horsepower is 3782870; 3789817 for 1962 to 1967 models providing 210 to 275 hp; 3791362 for 1964 to 1967 models with 250 to 300 hp; 3814660 for 1968 to 1969 models with 250-hp engines; and 3830944 for 1963 models with 300 hp.

What kind of engine does a 1967 Chevy small block have?

“1967 Chevrolet” is Copyrighted by Flickr user: Hugo90 (JOHN LLOYD) under the Creative Commons Attribution license. The Chevy small block 327-cubic-inch V-8 engine can be identified by its engine code stamping numbers. Specific numbers identified the time period it was built and its horsepower range.

What is the engine number on a small block Chevy?

Small Block Chevy 327 Identification. The Chevy small block 327-cubic-inch V-8 engine can be identified by its engine code stamping numbers.

What kind of engine does a 1962 Chevy 327 have?