What is the standard length of a spline?
What is the standard length of a spline?
Common designs use spline lengths of 0.75 D to 1.25 D, where D is the pitch diameter of the spline. When these standard lengths are used, the shear strength of the splines will exceed that of the shaft from which they are made. Spline Manufacturing Methods www.drivetraindirect.com
What are the dimensions of an involute spline?
Where: c F Form Clearance D ri Major Diameter, Internal Spline s Actiual Circular Space Width S v Effective Circular Space Width t Actual Circular Tooth Thickness
When does the internal spline interfere with the external spline?
b) For 15 teeth or less, the minor diameter of the internal spline, unless chamfered, will interfere with the form diameter of the external spline. c) For 9 teeth or less, the minor diameter of the internal spline, unless chamfered, will interfere with form diameter of the external spline.
Can you use spline data for reference dimensions?
Spline Data and Reference Dimensions. Reference data on spline data ;should not used for engineering and manufacturing purposes. Pitch and pressure angle data will then not be subject to individual dimensional inspection.
Common designs use spline lengths of 0.75 D to 1.25 D, where D is the pitch diameter of the spline. When these standard lengths are used, the shear strength of the splines will exceed that of the shaft from which they are made. Spline Manufacturing Methods www.drivetraindirect.com
What are the different types of splines in a shaft?
Mott, Fig. 11-6 Splines can be thought of as a series of axial keyways with mating keys machined onto a shaft. There are two major types of splines used in industry: 1) straight-sided splines, and 2) involute splines. Splines provide a more uniform circumferential transfer of torque to the shaft than a key. Splined Shaft and Hub
Spline Data and Reference Dimensions. Reference data on spline data ;should not used for engineering and manufacturing purposes. Pitch and pressure angle data will then not be subject to individual dimensional inspection.
