What is the Polaris belt 3211183 measurements?
What is the Polaris belt 3211183 measurements?
21 x 6 x 2 inches
Technical Details
| Manufacturer | Polaris |
|---|---|
| Product Dimensions | 21 x 6 x 2 inches |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 3211183 |
| OEM Part Number | 3211183 |
How are snowmobile belts measured?
Measure the width of the belt. Use a tape measure to measure the width of the belt in a number of different places. Confirm the measurements with a caliper and record the measurement. The new belt purchased should be the exact same width to properly fit on the clutches.
How long does a snowmobile belt last?
between 1500-2000 miles
Snowmobile drive belts are constantly subjected to hostile and ever-changing environments. Heat, cold, stretching and spinning can affect the performance and length of service of your belt. You can usually expect your belt to last somewhere between 1500-2000 miles before it will need to be replaced.
What are V belt sizes?
V-Belt Dimensions
| V-Belt Type | Top Width | Height |
|---|---|---|
| A | 1/2″ | 5/16″ |
| B | 5/8″ | 13/32″ |
| 3VX | 3/8″ | 21/64″ |
| 5VX | 5/8″ | 35/64″ |
Are Gates snowmobile belts any good?
They wear well, are very slow to lose their width, and the sleds run as they should at the right shift RPM with no slippage and less heat. The Gates belts would hold the same peak RPM in all conditions, from the tight trails to holding the sled at wide open throttle for long distances across a lake.
What’s high mileage for a snowmobile?
So, what’s considered high mileage on a snowmobile? A snowmobile that is over 8,000 miles, and especially over 10,000 miles, is considered to be high mileage. Generally, the life expectancy of a snowmobile is around 15,000 miles.
What do numbers on V belt mean?
The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2″ less for a 4L belt, and 1-1/2″ less for a 3L belt. An example would be 4L460, which would be 46″ long outside, 44″ inside. The number following it is the inside length in inches.
