What is the metal rod between door handles?

spindle
A spindle is a length of square rod or bar, made from metal, usually steel, which connects two Door Handles or Door Knobs together on either side of a door. The spindle locates into the square holes found at the back of a set of door handles or door knobs.

How do you take off a door knob?

Begin by holding the door knob securely in place. Using a Philips-head screwdriver, turn counterclockwise to unscrew a knob with standard hex-head screws….

Locate the hole underneath the doorknob shaft.
Push the tip of a narrow screwdriver into the hole.
Tug on the knob and it will slide right off.

Are all door handle spindles the same size?

Are all spindles the same size? A. Many British spindles are 7.6mm (19/64″) square. To allow for the difference in sizes found, UK lock manufacturers all produce locks with 8mm followers as standard.

How do you remove a door handle without a screw?

To remove a door handle without any visible screws, start by prying off the cover plate by inserting a flathead screwdriver in the notch on the side of the plate. If you don’t see a notch and the cover plate is round, try turning the plate counterclockwise to remove it.

How do you remove a latch from a door?

Pull the handles out of the latch assembly. With the mounting screws removed, you should have no problem pulling the knobs or levers out of the latch mechanism. Pull the handles in opposite directions to slide them out of the mechanism, then set them aside. Remove the latch mechanism if you’re installing a new handle.

How to protect door handles and other door furniture?

As architectural ironmongers, at More Handles we are often asked about how to prevent marine corrosion, rust, and atmospheric pitting in coastal door handles and other door furniture. By their nature, door handles, door knobs, pull handles and push plates, bell pushes and letter plates must be used on the exterior of a house or other building.

Where are the screws on a front door handle?

For most doors, you should see 1 to 3 exposed mounting screws on the side of the door that doesn’t have a keyhole. Look for screws on the cover plate that surrounds the handle. If you don’t see exposed screws on the cover plate, check the neck of the knob or lever. If you don’t see any exposed screws, don’t get frustrated!

What’s the best way to remove a door handle?

Grab a screwdriver that matches the screws’ head type, then turn them counterclockwise to loosen them. If you plan on reinstalling the door mechanism, store the screws in a safe spot to avoid misplacing them.

How to remove a door knob at Home Depot?

1 Locate the hole underneath the doorknob shaft. You should see a tiny slot or hole. 2 Push the tip of a narrow screwdriver into the hole. 3 Tug on the knob and it will slide right off. More

How do you remove a doorknob with no screws?

If that is the case, press the pin in using any thin object, and pull the faceplate off. To remove the entire doorknob assembly, also remove the two screws located on the inside of the door, on either side of the latch.