What is the EEC code?

What is the EEC code?

The EEC Code aims to reduce divergences between EU Member States of regulation of radio spectrum. New long licence durations (minimum 25 years) and rigorous requirements around the granting, renewal and restriction of rights of use are proposed by the EEC Code in order to ensure effective and efficient use of spectrum.

How do I check the codes on a Freightliner Cascadia?

How to Check Fault Codes DD15 Freightliner Cascadia

1. Key on, Engine off.
2. Placed unit in neutral.
3. Locate the square black button on the odometer screen.
4. Using the black button cycle through the options displayed on the odometer reading until it reads “diagnose”.
5. Hold the button until the display shows “faults”.

What does EEC 61 mean on a truck?

EEC 61 is basically saying there is a problem in the After-treatment control module. This is the module the Engine uses for the after treatment system. Your Check Engine Light, and/or your Maintenance light will be on at the same time.

What does EEC 61 mean on a 2012 Cascadia?

This answer was for a 2012 Cascadia w/ a Detroit DD15. EEC 61 is only part of the fault code. If you hit the square button again,write it down, then hit it again, then write that down. it should follow up with some more additional information that could help. EEC 61 is basically saying there is a problem in the After-treatment control module.

How to retrieve trouble codes on your EEC-IV system?

Start the truck and let it run at 2000 RPM for 2 minutes to warm the sensors. Turn off the engine and reconnect the jumper between the STI and DLC Connectors. Wait 10 seconds between the time you shut the truck off until you start it again. Start the truck.

What does the Check Engine light look like?

Your Check Engine Light, and/or your Maintenance light will be on at the same time. The maintenance light is the light that looks like a solid yellow engine. Make sure your DEF tank is 1/2 to FULL, you have a indicator on your fuel guage with 4 green squares, this is your DEF level.

EEC 61 is basically saying there is a problem in the After-treatment control module. This is the module the Engine uses for the after treatment system. Your Check Engine Light, and/or your Maintenance light will be on at the same time.

Where can I find list of check engine light codes?

If you are unsure of any abbreviations, check out the acronym list by clicking on the link at the left. Next, read our article Automotive Circuit Testing 101, and if there is an article related to the system you are testing, such as Oxygen Sensors or EGR concerns, read these as well.

Start the truck and let it run at 2000 RPM for 2 minutes to warm the sensors. Turn off the engine and reconnect the jumper between the STI and DLC Connectors. Wait 10 seconds between the time you shut the truck off until you start it again. Start the truck.

This answer was for a 2012 Cascadia w/ a Detroit DD15. EEC 61 is only part of the fault code. If you hit the square button again,write it down, then hit it again, then write that down. it should follow up with some more additional information that could help. EEC 61 is basically saying there is a problem in the After-treatment control module.