What is the code po480?
What is the code po480?
What the P0480 code means. P0480 means that the cooling fan 1 control circuit has a malfunction. The vehicles ECU has tried to control the cooling fan 1 and it has failed to operate or a fault was detected. The ECU then triggers a Check Engine Light to illuminate on the dashboard.
What are the symptoms of a bad radiator fan relay?
Symptoms Of A Bad Radiator Fan Relay. The Basics Of The Radiator Fan Relay. START HERE: The Radiator Fan Motor Relay Tests. TEST 1: Checking The Radiator Fan Relay Power Circuits. TEST 2: Bypassing The Radiator Fan Relay. TEST 3: Bypassing The Radiator Fan Switch. TEST 4: Bench Testing The Radiator Fan Relay. More Honda Accord Test Tutorials.
What should I do if my radiator fan is not working?
A blown fuse is no big deal, and changing one does not cost a lot of money. If your car’s radiator fan is non-functional, check your car’s user manual and locate the fuse for the radiator fan controller or the fan. The fan itself often uses a big fuse of around 50A, while there might also be a separate small fuse to the fan control module.
What to do when two wire accessory is not working?
When a particular two wire accessory is not operating, use a grounded test light to check for power at the wiring harness (either wire). If there is no power, the electrical system must be tested starting with the fuse then the relay.
How to test the Honda Accord radiator fan relay?
TEST 1: Checking The Radiator Fan Relay Power Circuits. TEST 2: Bypassing The Radiator Fan Relay. TEST 3: Bypassing The Radiator Fan Switch. TEST 4: Bench Testing The Radiator Fan Relay. More Honda Accord Test Tutorials.
Symptoms Of A Bad Radiator Fan Relay. The Basics Of The Radiator Fan Relay. START HERE: The Radiator Fan Motor Relay Tests. TEST 1: Checking The Radiator Fan Relay Power Circuits. TEST 2: Bypassing The Radiator Fan Relay. TEST 3: Bypassing The Radiator Fan Switch. TEST 4: Bench Testing The Radiator Fan Relay. More Honda Accord Test Tutorials.
What to do if your radiator fan is not working?
Remove the air filter box (not the filter just take out the entire box), pry the front cover off the battery junction box (not the battery) and you will see the same color wire as the control module connector going into a 50 amp fuse at junction 8.
Why is fuse 32 on my radiator not working?
Fuse 32 has nothing to do with the fan. The problem is my fan is not getting a signal. Fuse 32 has nothing to do with the fan. The problem is my fan is not getting a signal.
TEST 1: Checking The Radiator Fan Relay Power Circuits. TEST 2: Bypassing The Radiator Fan Relay. TEST 3: Bypassing The Radiator Fan Switch. TEST 4: Bench Testing The Radiator Fan Relay. More Honda Accord Test Tutorials.
