Easy tips

What is OBD scan tool for Chevy Silverado?

What is OBD scan tool for Chevy Silverado?

Chevrolet Silverado 1999-2006: How to Use OBD Scan Tool, Reset Service Engine Soon and Change Engine Oil Light. The OBD-II port is your access into the vehicle’s computer system. Depending on your scan tool, this diagnostic port will allow you to check diagnostic codes, view freeze frame data, and possibly watch live data from vehicle sensors.

What should I do about the warning lights on my Silverado?

Few things can be more annoying than pesky warning lights; here is how to fix them. This article applies to the Chevrolet Silverado 1500 (2007-present).

What’s the fault code on a Chevy Silverado?

This article applies to the Chevrolet Silverado GMT800 (1999-2006). The vehicle’s computer systems are constantly watching the inputs it receives from sensors spread throughout the powertrain and body. When these sensors record unexpected information, a fault code is set for that system/component and a check engine light will display.

Where do I put the scan tool on my car?

Plug your scan tool into the OBD-II port of your car. Put your key in the ignition of the vehicle, and switch it to the “on” position, but do not start the vehicle. Turn on your scan tool, check the “retrieve code” option, and pull the error codes. Select the option to clear the stored codes.

What’s the error code on my Silverado engine?

3,974 satisfied customers Check engine light came on code is $7e8: engine and 7ea. Check engine light came on code is $7e8: engine and 7ea …  read more Steve Master’s Degree 26,980 satisfied customers 2012 Silverado 1200HD, 41K milles. Fressh oil, new filters. 2012 Silverado 1200HD, 41K milles. Fressh oil, new filters.

What’s the error code on my Chevy Avalanche?

See more Related Chevy Questions 7ea and 7e8 code on my 2097 Chevrolet Avalanche. I bought

Why does my Phoenix scan tool not work?

It might be the scan tool we had problem with the cables. Yeah Phoenix has all the nicer stuff including a wireless scan tool can’t remember the brand though. I’ve been working with different shops waiting on a call from a trucking company.

Is there no communication with the scan tool?

Follow Asked by NicolasOct 30, 2017 at 05:02 PM about the 2005 Chevrolet Silverado 1500 RWD Question type: Maintenance & Repair I am not having any communication with the scan tool and the abs. I have checked all the fuses. It started after we put it up on the lift to give it a look over didn’t do any work just to look at frame 1 Answer

What kind of engine does a Silverado 1500 have?

It started with a abs light, there are no codes to be found in the computer, but there is a light. Next, the airbag 2006 Chevrolet Silverado 1500 1LT Extended Cab 4WD Maintenance & Repair New 5.7ltr engine with 300 hp and no “get up and go”. 2 Answers I had a new (not rebuilt) 5.7 engine installed in my 98 Chev PU. Runs fine, starts first go.

Chevrolet Silverado 1999-2006: How to Use OBD Scan Tool, Reset Service Engine Soon and Change Engine Oil Light. The OBD-II port is your access into the vehicle’s computer system. Depending on your scan tool, this diagnostic port will allow you to check diagnostic codes, view freeze frame data, and possibly watch live data from vehicle sensors.

What is white automotive’s new GM scan tool?

New AutoSync GM Vehicle Programmer / Scan Tool First to market solution allows users more customization of their GM vehicle than ever before [New Hudson, Michigan, December 6th 2019] — The first fruit of the new partnership between White Automotive & Media Services and BT Dieselworks is a sweet one indeed!

Plug your scan tool into the OBD-II port of your car. Put your key in the ignition of the vehicle, and switch it to the “on” position, but do not start the vehicle. Turn on your scan tool, check the “retrieve code” option, and pull the error codes. Select the option to clear the stored codes.

Which is the best diagnostic tool for your car?

Check Engine Code Reader Automotive Car Diagnostic Tool/Car Code Scanner for O2 Sensor/EVAP System/Smog Test . . . Need help?

What to do if your scan tool won’t communicate?

If still no communication make sure the DLC is getting power to it. I checked pin #16 and it is getting 12 volt. I copied the electrical specs from alldata and am gonna test the other pins for continuity. I have a bluetooth OBD transponder and Torque downloaded to my phone so this weekend I can play with it.

Why does my Ford scanner not work when plugged in?

OBD II..the scanner will not communicate when plugged in OBD II..the scanner will not communicate when plugged in – Answered by a verified Ford Mechanic We use cookies to give you the best possible experience on our website.

How do you scan a 2005 Bonneville truck?

I know that these scan tools have code keys You plug in the tool and enter in the pertinent information. Then if required it will give a key # to plug into the scanner. I know it was a working scanner as I had used it a few hours earlier on a 97 H*** ad a 2005 Bonneville.

How to fix a car that won’t communicate with a scan tool?

This feature is not available right now. Please try again later. Scotty Kilmer, mechanic for the last 48 years, shows how to fix a broken car the won’t communicate with a scan tool so you can’t get any information on the problem. Sometimes it’s as easy as just disconnecting parts to find the problem. 1. Actron Scan Tool: http://amzn.to/2ngeCQJ 2.

I know that these scan tools have code keys You plug in the tool and enter in the pertinent information. Then if required it will give a key # to plug into the scanner. I know it was a working scanner as I had used it a few hours earlier on a 97 H*** ad a 2005 Bonneville.

Why is my OBD2 scanner not communicating with my car?

Each time I have tried scanning my vehicle for codes using the OBDII scanner, there is a message on the scanner stating that it is unable to communicate with vehicle. There are lots of issues with my car, but I am not able to correct them because of the OBDII issues.

What does it mean when a scan tool does not communicate?

Many scan tools now have their own battery supply. When this condition is encountered you generally end up at a screen that states that the module will not communicate. Not a big deal if you know your tool and realize you need to check those circuits.

What is the OBD2 code for a Chevy?

OBDII Chevrolet Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.

Why does my Silverado scan tool not turn on?

So, verify that you have a blown 15A fuse, and if so, bang in a 15A fuse and you should be good to go. Keep in mind that this doesn’t tell you why the fuse blew, although 9/10 times using a cell phone charger in one of the 12v acc ports is the cause. Loading…

Why is my code reader not working on my 2004 Silverado?

Here I went to read codes in a 2004 Silverado and my tech2 wouldn’t power up. Like the Trailblazers, power to the obd2 port goes through the CIG LTR fuse in the front fuse block. So, verify that you have a blown 15A fuse, and if so, bang in a 15A fuse and you should be good to go.

How to read code without scan tool on 1994 GM?

Insert the pointed ends into the furthest two top-right diagnostic connector terminals. After bridging the two top right terminal connections on the diagnostic connector, switch the ignition to the “ON” position. Watch the “Check Engine” light on your dashboard. It should flash once, pause, and flash two more times in succession.

OBDII Chevrolet Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.

Where is the OBD port on a Chevy Silverado Sierra?

OBD connector location for Chevrolet Silverado Sierra (1999 – 2006) You will find below several pictures which will help you find your OBD connector in your car. The OBD2 port is located under the steering wheel. Go to the OBD2. scanner for CHEVROLET. Here is the OBD port above the emergency brake pedal.

Where is the OBD2 port in my Chevrolet Aveo?

To diagnose your vehicle yourself, download our EOBD-Facile car diagnostic software. Use our search engine below to locate your OBD2 port! You will find below several pictures which will help you find your OBD connector in your car. Aveo II (2011 – …)

What to do if the OBD II scanner doesn’t communicate with the vehicle?

What to do if the OBD II scanner doesn’t communicate with the vehicle. TEST 1: Connect the positive DMM lead to DLC pin 4 and the negative DMM lead to the negative battery terminal, using jumper wires if necessary. Do not connect to the body or chassis ground but to the battery terminal directly.

OBD connector location for Chevrolet Silverado Sierra (1999 – 2006) You will find below several pictures which will help you find your OBD connector in your car. The OBD2 port is located under the steering wheel. Go to the OBD2. scanner for CHEVROLET. Here is the OBD port above the emergency brake pedal.

What to do when your OBD2 scanner does not power when you plug it in?

It will happen. You hook up your scanner to the obd2 port and your scanner will not turn on. This is when you must know a little electrical diagnosis to solve the problem. Check the wiring diagram, then check the fuse to the obd2 port. Easy, peasy, japaneasy. Check out my online store and pick up all your mechanic supplies! Service Businesses.

To diagnose your vehicle yourself, download our EOBD-Facile car diagnostic software. Use our search engine below to locate your OBD2 port! You will find below several pictures which will help you find your OBD connector in your car. Aveo II (2011 – …)

What to do if the OBD II scanner doesn’t communicate with the vehicle. TEST 1: Connect the positive DMM lead to DLC pin 4 and the negative DMM lead to the negative battery terminal, using jumper wires if necessary. Do not connect to the body or chassis ground but to the battery terminal directly.

Where is the scan port on a truck?

This first set of steps will guide you through the use of a common aftermarket scan tool. The OBD-II (“On-Board Data, 2nd generation”) port is located at the bottom of the knee bolster, near the parking brake release. Simply plug the scan tool connector into the OBD-II port. Turn your truck’s ignition to the “on” (not start) position.

What happens when you put DTC code in auto scanner?

Once the auto scanner completes the scanning process, it will give you a diagnostic trouble code or several codes. You can either write these down, transfer them to your laptop using a USB cable or Bluetooth if your scanner is Bluetooth compatible. You can then check these DTC codes in the manual to understand what your car is suffering from.

Do you need to reset the service light on a Chevy Silverado?

More commonly is the need to reset the engine service light and change engine oil light, both of which can be done easily. This article applies to the Chevrolet Silverado GMT800 (1999-2006). The vehicle’s computer systems are constantly watching the inputs it receives from sensors spread throughout the powertrain and body.

How does the oil change work on a Silverado?

The Silverado GMT800 has a unique system for determining the condition of engine oil. It uses a series of sensors to determine the length of time the oil has been used, and changes in oil temperature. Once conditions have been met, the computer sets the change engine oil light.

What does vehicle diagnostics service do for You?

The Vehicle Diagnostics service monitors your vehicle’s key operating systems and provides you with regular updates about your vehicle’s health, so that you can enjoy extra peace of mind when you’re on the road. You can choose to receive a monthly email with a report on your vehicle’s key operating systems.

Where can I get a diagnostics report for my car?

You can sign up for a monthly email report through your online account or by pushing your blue OnStar button. The diagnostics report includes information about your vehicle’s health like oil status, tire pressure, upcoming maintenance and more.

How many OBD diagnostics does a vehicle need?

OBD Readiness Your vehicle performs up to 11 diagnostic checks of specific emission control components such as engine, transmission, fuel systems and other emissions controls. Each diagnostic check communicates with a monitor called a readiness monitor.

What do you call the drive cycle after an OBD test?

This is commonly referred to as a “drive cycle.” If possible, when working on a vehicle either before or after an E-Check OBD II test; do notclear the Diagnostic Trouble Codes (DTC’s) so that the check engine light remains on after the repair(s).

This article applies to the Chevrolet Silverado GMT800 (1999-2006). The vehicle’s computer systems are constantly watching the inputs it receives from sensors spread throughout the powertrain and body. When these sensors record unexpected information, a fault code is set for that system/component and a check engine light will display.

Where is the scan tool port on a truck?

The OBD-II (“On-Board Data, 2nd generation”) port is located at the bottom of the knee bolster, near the parking brake release. Simply plug the scan tool connector into the OBD-II port. Turn your truck’s ignition to the “on” (not start) position.

What causes the ECM in a car to fail?

The most common source of ECM failure is in one of the wiring harnesses. If the wires to the transmission or fuel injectors become corroded, they can lose conductivity, leading to a failure. Fortunately, these issues can usually be resolved by replacing the corroded wires. If one of the wires shorts out to the frame, the ECM may fail entirely.

Where do I find the OBD port on my car?

To determine which one you have, if your vehicle was built and sold in the US after January 1st, 1996 you will have an OBD 2 port. This service will allow you to find the OBD2 port location. Check out our other services! Get the year make model and engine type of a VIN.

Author Image
Ruth Doyle