What is EGR Dodge Ram 1500?
What is EGR Dodge Ram 1500?
The EGR valve is responsible for recirculating some of your exhaust through the combustion process, which decreases the amount of greenhouse gases that enter the environment. Faulty Ram EGR valves become clogged over time and this is extremely tough on your engine.
Where is the EGR valve on a Dodge Ram?
Locate the EGR valve in the engine bay. The year and make of the Dodge vehicle determine where the valve is located. This is on the front of the engine block, next to the timing belt in model-year 2005 and newer trucks. In older vehicles you will typically find the valve behind the engine, near the firewall.
Where is the EGR valve located on a Honda Accord?
There are a total of four bolts: one is on the connector attached to the valve. The 4.7/3.7’s EGR valve is located on the rear of the driver’s side cylinder head, making it very hard to change without removing the resonator box. Refer to Step 1 of the Related Article: How to Replace Ignition Coils and Spark Plugs for this procedure.
How do you replace the EGR valve on a hemi?
There are two bolts holding the exhaust pipe to the lower part of the EGR valve, the bolts can easily be removed with a 8mm socket with an extension. If they are stuck use some PR Blaster on them, mine came off easily. Make sure to hold onto the gasket that is between the pipe and the valve when removing the pipe.
Where is the exhaust valve on a Dodge Ram?
In older vehicles you will typically find the valve behind the engine, near the firewall. Unclip the exhaust tube from the side of the valve. You can do this by hand. Shift the tube from side to side until it slides off.
How much does a Dodge Ram 1500 EGR valve cost?
Your Dodge Ram 1500 will be happy to know that the search for the right EGR Valve products you’ve been looking for is over! Advance Auto Parts has 13 different EGR Valve for your vehicle, ready for shipping or in-store pick up. The best part is, our Dodge Ram 1500 EGR Valve products start from as little as $46.99.
Where is the EGR plug on a Dodge Ram?
At the top of the valve you will see a black electrical connector plug with a red tab. Push the red tab to the right to unlock it, and then squeeze the flexible tab on the connector plug while pulling it away from the valve. Now, remove the exhaust hose from the EGR valve. There are two bolts with 8mm heads.
Where can I get an EGR valve replaced?
Faulty Ram EGR valves become clogged over time and this is extremely tough on your engine. Order an EGR valve replacement online from AutoZone and enjoy home shipping or choose Same-Day Store Pickup if you need your new part immediately.
There are a total of four bolts: one is on the connector attached to the valve. The 4.7/3.7’s EGR valve is located on the rear of the driver’s side cylinder head, making it very hard to change without removing the resonator box. Refer to Step 1 of the Related Article: How to Replace Ignition Coils and Spark Plugs for this procedure.
