What happens when you change the fuel filter on a Chevy Silverado?

A clogged fuel filter will cause hesitation and occasional fuel starvation. Let’s change it out. This article applies to the Chevrolet Silverado GMT800 (1996-2006). In a fuel injected fuel system, the fuel filter is extremely important. It is critical in keeping contaminants and particles from clogging injectors or other parts of the fuel system.

When to replace the fuel pump on a Chevy Silverado?

If your Chevrolet Silverado isn’t performing the way it once did, or if you feel like you’re stepping on the gas pedal and not much is happening, it may be time to replace the fuel pump. This article applies to the Chevrolet Silverado (1999-2006).

How to replace a fuel filter on a GMC Sierra?

To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: 56-om5LqBThfEqTf) An error occurred while retrieving sharing information. Please try again later.

When do you need to replace your fuel filter?

If your car is hard to start, experiencing engine performance issues, or has the Check Engine Light on, you may need to replace the fuel filter. 1. Car is Hard to Start 2. Engine Performance Problems 3. Check Engine Light Comes On 4. Damaged Fuel Pump

Where can I buy a 2006 Chevy Silverado fuel pump?

Buy 2006 Chevrolet Silverado 1500 Fuel Pump from AutoZone. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only

How often should you replace your fuel filter?

In a fuel injected fuel system, the fuel filter is extremely important. It is critical in keeping contaminants and particles from clogging injectors or other parts of the fuel system. The fuel filter is recommended to be replaced every 30,000 miles or 30 months. Here is how to replace the fuel filter to keep your fuel system nice and clean.

Is there a fuel filter on a 2006 Colorado?

I just purchased a 2006 Colorado and had read where you should change the fuel filters on these rigs at 25000 miles. I looked in the Manuel for the 2006 and it does not mention a fuel filter anywhere in the Manuel. I traced the fuel lines form the tank to the injection system, and I did not find a filter.

Where do I go to change the fuel filter?

Ask the clerk at an auto parts store or the service department at your dealership which type of filter your vehicle has. If doing this infrequent job requires purchasing special tools, it’s probably cheaper to have it done by a technician. If not, the first thing you need to do is find the filter.

How do you change the fuel pump fuse?

Remove whatever is holding the old filter in place and remove it. Put the new filter on in the same position as the old filter. Replace whatever holds the filter in place, and make sure it’s secure. Replace the fuse for the fuel pump in the fuse box.

What are the symptoms of a bad fuel filter?

Here are the most common symptoms of a bad fuel filter in your Chevy Silverado: The only way that you are going to know that your Silverado’s fuel filter may be going out is that it is no longer letting enough fuel through to keep the engine running under a heavy load, or at high-speed.

How do you change the fuel filter on a car?

Slide the jack under the car at one of its designated jack points, then either pump or twist the handle to raise the vehicle (depending on the style of jack). Once the vehicle is jacked up, place jack stands beneath it before working under the vehicle. Never rely on a jack to support the weight of a vehicle you are beneath while working.

Where is the fuel pump relay on a Chevy Silverado?

Remove the fuel pump relay from the relay box in the engine compartment. A guide identifying the relay is under the lid of the relay box. Turn the ignition key to “START” and crank the engine over. It should start for a moment, but then stall. Turn the ignition key to “OFF.” Disconnect the negative (black) cable from the battery.

Where is the fuel filter on a Chevy Sonic?

Things began to change in the 80’s. Fuel injection requires higher fuel pressure. Higher fuel pressure meant that a more robust fuel filter would be required. This meant the fuel filter was no longer left under the hood. It was put in the steel fuel line, between the gas tank and engine bay.

Where is the fuel filter on a Chevy HHR?

Fuel injection requires higher fuel pressure. Higher fuel pressure meant that a more robust fuel filter would be required. This meant the fuel filter was no longer left under the hood. It was put in the steel fuel line, between the gas tank and engine bay. These fuel filters were more reliable, but they also were tougher to change.

Where is the fuel tank regulator on a Chevy Silverado?

Loosen the fuel tank cap to relieve the vapor pressure in the fuel tank. You need to locoate the fuel pressure regulator. It’s about the size of a walnut and is located on the drivers side fuel rail for the 5.3 liter V8. Place the bleed hose of the gauge into a container that will hold the excess fuel.

What kind of fuel tank does a Silverado 3500 have?

Some 2015-2018 Silverado and Sierra models and 2019 Silverado 2500/3500 and Sierra 2500/3500 models equipped with the 6.6L Duramax diesel engine (RPOs LML, L5P) and dual fuel tanks (23.5 gallon/89 liter front tank and 40 gallon/151 liter rear tank) (RPO N2N) may have poor fuel transfer or the rear fuel tank may have collapsed. (Fig. 13)

What kind of fuel filter does a Chevy 1500 have?

The Chevy 1500 model is also known as the Chevrolet Silverado 1500. The Chevrolet Silverado 1500 has an in-line fuel filter that catches and traps the sediments from the fuel before the fuel gets to the engine. Once the fuel filter traps the sediments inside of the filter, the fuel travels to the engine.

How do you change the fuel line on a Chevy 1500?

Hold the fuel filter with one hand, and turn the hex head on the fuel line with the 14-mm wrench counterclockwise to loosen and remove the fuel line. Do this to both fuel lines. Let the fuel lines hang down toward the catch pan. Slide the fuel filter out of the round bracket from front to back.

How do you change the fuel filter on a Chevy Silverado?

Remove the caps you put on the fuel pipes and connect the threaded fittings back to the filter. Tighten the fittings to 18 foot-pounds. Lower the vehicle and tighten the fuel filter cap. Replace the fuel. Reconnect the negative battery cable. Turn the ignition on for 2 seconds. Turn the ignition off for 10 seconds, then turn it back on again.

Why does my Chevy Silverado not start up?

If the fuel filter has become so contaminated that the minimum amount of fuel has not been let through it, the engine won’t start at all. At the most basic of levels your Chevy Silverado needs three things to start: Air, fuel, and spark. If any of these things aren’t present, the engine won’t turn over at all.

How can I tell if my Chevy Silverado fuel pump is bad?

Testing your Silverado’s fuel pressure on each side of the pump would be the best way to diagnose this problem. A priming fuel pump sounds like a high-pitched whine for a few seconds and can be heard with a sharp engine right after the ignition key is turned, but before the starter is engaged.

What’s the fuel filter number on a Chevy 1500?

Crank the engine on the fourth turn. Inspect the fuel lines and the fuel filter for leaks. Turn the engine off. The fuel-filter part number for the Chevrolet Silverado 1500 model truck is Hastings-3691-05041511. Always wear safety glasses when working around fuel.

How do you put a fuel filter in a truck?

Let the fuel lines hang down toward the catch pan. Slide the fuel filter out of the round bracket from front to back. Slide the new fuel filter into the bracket from the rear of the bracket with the arrow on the fuel filter facing the front of the truck. The arrow that is stamped on the fuel filter represents the fuel flow through the fuel filter.

How do you remove the fuel filter from a car?

Removing the Old Fuel Filter Disconnect the battery. Locate the fuel filter. Jack up the car if necessary. Place a bowl or bucket beneath the fuel filter. Remove the clips holding the fuel filter in place. Remove the fuel lines from the filter. Slide the fuel filter out of its bracket.

Where is the fuel filter on a Vortec V8?

Your fuel filter is inside your fuel tank and it is part of your fuel module. I have some pictures of it on here somewhere. It’s a lifetime filter. To replace it you need to drop the tank and replace the entire fuel module.

Where is the fuel filter on a truck?

The fuel filter should be just forward of the fuel tank. Your truck should tell you when it’s time for an oil change. If you have an info button then toggling thru it should get you to “engine oil life”. But if you just got the truck you should change the oil unless you know for a fact that it’s been changed.

How to reset a fuel filter alert on a GMC Duramax?

This must be done manually from inside the cab of the truck. Press and hold the return arrow or select button (depending on model) on the right side of the steering wheel for five seconds while the fuel filter message is displayed. Follow the subsequent steps if your truck does not have steering wheel control buttons.

What do I need to Reset my Chevy Silverado computer?

While doing the process of rebooting the computer, you will need the OBD II car code reader. For noting down the code, you may need a pen and a piece of paper. While buying and resetting your Chevy Silverado’s computer, there are chances that so many questions come into your mind.

Where is the fuel pump reset switch location on the Chevy?

The fuel pump reset is snugly positioned in the passenger footwell. If the switch needs to be replaced, You can expect to pay between $30 and $138 for parts. The fuel pump reset switch can be found on the toe-board, to the right of the transmission hump, in the passenger-side footwell.

When do I need to change my fuel filter?

This alert system will let you know when to change your engine oil, when you have water in your fuel, as well as letting you know that your fuel filter will need changed soon. However, the act of replacing the fuel filter will not erase the alert from the screen. This must be done manually from inside the cab of the truck.

How do I remove the fuel filter alert?

However, the act of replacing the fuel filter will not erase the alert from the screen. This must be done manually from inside the cab of the truck. Press and hold the return arrow or select button (depending on model) on the right side of the steering wheel for five seconds while the fuel filter message is displayed.

What happens when you change the fuel filter on a Chevy Silverado?