What engine do Porsche 911s have?
What engine do Porsche 911s have?
Engine, Transmission, and Performance Mounted in the rear of the 911 is a twin-turbo 3.0-liter flat-six-cylinder engine. The base Carrera has 379 horsepower, the S pumps out 443 ponies, and the GTS generates 473 horses.
What causes a Porsche 911 starter to fail?
The electrical portion of the ignition switch is another source of trouble. This small part often wears out and fails after many years. Some symptoms of this problem is an ignition switch that requires a lot of force to start the car. Another symptom is headlamps that flicker on and off when you wiggle the key.
Where to plug in Porsche 911 MSD Ignition unit?
Tap the thin red wire from the MSD unit into the red wire that comes into the CD box connector. It’s a wise idea to use some male spade connectors and plug right into the CD box connector so that you don’t destroy the wiring or the connector.
What kind of CD coil does Porsche 911 use?
The MSD system will not work with the standard CD coil that is stock on the 911. The standard Bosch blue coil (0.221.119.027) can typically be used with the system, although some people have experienced difficulties with it and have replaced it with the high-power MSD coil.
Where is the Orange Wire on a Porsche 911 ignition unit?
The orange wire is connected to the positive (+) terminal of the coil, whereas the black wire is connected to the negative (-) terminal. The thinner red wire needs to be connected to a switched voltage source. The best place to do this is to tap into the electrical connector that used to go to the CD box.
What kind of ignition system does a Porsche 911 use?
We’ve been providing solutions for a variety of street cars, race cars and other specialty engines for over 20 years. All TEC ignition and engine management systems start with a patented, multiprocessor, high resolution Ignition that Electromotive is famous for as a core.
What does TEC do in a Porsche 911?
Electromotive designed the TEC engine management system to handle high-revving race engines with the absolute requirement for performance from the ignition and fuel delivery. For engine longevity, nothing but the most accurate ignition timing and fuel delivery will do for high RPM engines.
What is the MSD system for a Porsche 911?
The MSD system allows you to adjust this RPM level by plugging in modules into the unit. The main MSD unit recommended for the 911 is the 6AL, part number 6420. This kit contains all the wires, connectors, mounts and crimping hardware that you will need to install the unit in your 911.
The MSD system will not work with the standard CD coil that is stock on the 911. The standard Bosch blue coil (0.221.119.027) can typically be used with the system, although some people have experienced difficulties with it and have replaced it with the high-power MSD coil.
