What does the VIN number on a Chevrolet S10 mean?

Chevrolet S10 VIN decoder Every Chevrolet car has a unique identifier code called a VIN. This number contains vital information about the car, such as its manufacturer, year of production, the plant it was produced in, type of engine, model and more.

What do you need to know about the VIN number?

This number contains vital information about the car, such as its manufacturer, year of production, the plant it was produced in, type of engine, model and more. For instance, if someone wants to buy a car, it is possible to check the VIN number one the online database to ensure that the car was not stolen, damaged or illegally modified.

What do you need to know about the Chevrolet S10?

Find all the latest facts, figures and Chevrolet S10 specs based on year, make and model. Chevrolet vehicle history report may contain the following information: title problems, prior damages, unsafe salvage rebuilds, odometer mileage, theft, past sales. What is VDS? VDS is a Vehicle Descriptor Section.

What do you need to know about the VIN on a Chevrolet?

This is the Chevrolet VIN decoder. Every Chevrolet car has a unique identifier code called a VIN. This number contains vital information about the car, such as its manufacturer, year of production, the plant it was produced in, type of engine, model and more.

Where do I find the VIN number on my car?

The VIN number has a specific format that is globally recognized. This format was implemented by the ISO institute. Every car manufacturer is obliged to mark all its vehicles in this special format.

What kind of rear end does a Chevy S-10 have?

The Chevrolet S-10 pickup truck, one of the first compact models manufactured by a domestic auto maker, was equipped with three different rear-differentials, or rear ends.

How many grooves does a S10 S10 have?

According to S10 Planet, the 7.5-inch shaft has 26 splines, or grooves, while the 7.625 has 28 splines. This article was written by the It Still Runs team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information.

How does a Chevrolet S10 engine get remanufactured?

Use the fitment form at the top of the page to select your exact year and engine type for your Chevrolet S10. Remanufactured Engines are completely disassembled & put through the same process every time. All heads, blocks, cranks and cams are machined & wear parts are replaced.

What kind of engine does a 1994 Chevy S-10 have?

Blow out special!!!, S-10 LS, 2D Extended Cab, 4.3L V6 CPI, 4WD, Black, BLACK CLOTH, ABS brakes, Front anti-roll bar, Power steering. Priced below KBB Fair Purchase Price! 4WD 4.3L V6 CPI Description: Used 1995 Chevrolet S-10 LS with AWD/4WD, Extended Cab. Clean CARFAX. INFORMATION ABOUT THIS VEHICLE AND ITS FEATURES:.

What does Vortec stand for in Chevy engine?

The term “vortec” is simply a marketing name used by Chevrolet to communicate its use of “vortex technology”. Chevy’s vortex technology creates an air vortex inside the engine, which results in better air-to-fuel efficiency.

Where does the Chevrolet S-10 Blazer come from?

The Brazilian variant, based on the second-generation S-series, continues in production in Brazil with their own sheetmetal stampings as well as in Canada with the Brazilian, Indonesian and Russian sheetmetal stampings).

When did the Chevy Blazer come out in the US?

GMC S-15 Jimmy 2-door Chevrolet introduced the S-10 Blazer in 1982 along with its rebadged variant, the GMC S-15 Jimmy, and S-10 pickup truck, the latter replacing the Isuzu -based Chevrolet LUV. The Blazer and Jimmy appeared as 1983 models.

When did the S10 Blazer get anti lock brakes?

The serpentine accessory drive for the 4.3L motor was modified where the air pump was eliminated and further lightened. From at least 1991 onward, all S10 Blazers and Jimmies came with 4 wheel anti-lock brakes as standard equipment.

What does the VIN number on a Chevy Blazer mean?

Chevrolet BLAZER VIN decoder Every Chevrolet car has a unique identifier code called a VIN. This number contains vital information about the car, such as its manufacturer, year of production, the plant it was produced in, type of engine, model and more.

How to find out what year my Chevy Blazer is?

Find all the latest facts, figures and Chevrolet BLAZER specs based on year, make and model. Chevrolet vehicle history report may contain the following information: title problems, prior damages, unsafe salvage rebuilds, odometer mileage, theft, past sales.

What are the engine codes on a Chevy truck?

Engine combinations vary for each model and year. Some of the more popular truck engine codes are C for a 6.2 diesel, F for 5.0 gasoline engine, R for a 5.7, and W for a 4.3. Use an Internet VIN decoder to find the engine specifications for your truck. The 10th character indicates the year of the vehicle.

How much torque does a Chevrolet S-10 have?

4.3L-262ci-V6 Torque Specifications for Chevrolet S-10 Anti Roll/Stabilizer Bar To Axle Assembly 44 Ft-Lbs 528 In-Lbs 59.66 N-m

How big is the front stabilizer bar on a Chevy’s 10?

Grade: Anti Roll/Stabilizer Bar To Control Arm-Lower 11 Ft-Lbs 132 In-Lbs 14.92 N-m Years: 1996-2004 Note: Gen II – 4WD – FRONT Stabilizer Bar Link Nut

How much is a 1998 Chevy S10 extended cab?

Year200220012000199919981997199619951994Year See Trade-in Value Used 1998 Chevrolet S10 Extended Cab Pickup Edit OptionsMileage: 142,654 4.2 Consumer Write a review View Gallery For Sale 44 Chevrolet S10 Extended Cab vehicles nationwide.

What kind of engine does a 1998 Chevy S-10 have?

Description: Used 1998 Chevrolet S-10 LS with AWD/4WD, 5000lb Towing Capacity, Extended Cab. 1999 Chevrolet S-10 LS regular cab 2WD with the 2.2L 4 cylinder engine. Cloth seats; hard tonneau cover. Call 509-276-2925 for more information. Accident History: This vehicle has 0 reported accidents.

Is there a Title Guarantee on a 1998 Chevy S-10?

CLEAN TITLE GUARANTEE-Friendship guarantees that every car has accurate mileage and has not ever been designated salvaged or flood damaged or we will buy it back.

When did the Chevy S-10 pickup truck come out?

The Chevy S-10 is a compact pickup truck manufactured by the Chevrolet division of General Motors between 1982 and 2004. This model has three generations. Are you looking for repair parts for your Chevy S-10?

Where can I find parts for my Chevy S-10?

Then check out CARiD.com! Here you will find a full assortment of repair parts for the S-10, including transmission parts, air intake parts, engine parts, exhaust parts, brake parts, driveline and axles, fuel delivery parts, ignition parts, emission control parts, engine cooling parts, and a lot of other products for a successful repair job.

Is the Chevy S10 based on a GM platform?

As such, the model was fully designed and developed by GM’s Detroit Development Center, unlike its Japanese-rooted predecessor, the Chevrolet LUV truck . The first-generation Chevrolet S-10 was based on the GM GMT325 platform shared with various other vehicles, including:

How to find the VIN number of a Chevy S10?

It is possible to get market price of new or used Chevrolet S10 by VIN number. Every buyer must check Chevrolet S10 car history before getting a car loan or credit. Buying a used car?

What does the ABS light mean on a Chevy S10?

Your Chevy S10’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the S10 does not have Anti-Lock brakes, and the safety they provide. Your S10’s ABS system uses a system of sensors to determine wheel speed when braking.

Is there a code 504 Chevy S10 conversion kit?

Code 504 is a manufacturer of high-quality Made in USA bolt-on S-10 frame swap kits and street rod parts. This is a quick run-through on installing the brackets for a 1947-55.1 Chevy short-bed pickup on the Code 504 S10 Conversion Kit…

How much does a 2002 Chevy S-10 weigh?

Curb weight: 3,016 lbs. Gross vehicle weight: 4,200 lbs. Payload: 1,184 lbs. Towing Capacity: 6,000 lbs.

Which is the best S10 throttle body unit?

Chevrolet S10 Fuel Delivery∕ Chevrolet S10 Throttle Body System∕ Chevrolet S10 Throttle Body Unit Chevrolet S10 Throttle Body Unit Shop AutoZone for Chevrolet S10 Throttle Body Unit. Sort by FeaturedPrice (low to high)Price (high to low)

What kind of engine does a 2002 Chevy S-10 have?

Crew Cab LS 4WD. Extended Cab. Regular Cab. Available in Regular, Extended and Crew Cab body styles, the 2002 Chevrolet S-10 features engines ranging from a 120 horsepower 2.2-liter gas-powered L4 to a 190 horsepower 4.3-liter V6, depending on the configuration. Wheelbases range from 108 inches in Regular Cab models to 123 inches in Crew Cab S-10s.

How much does a 2002 Chevy S10 cost?

None for sale nearby. Instead: My friends and I have owned s10’s since we were old enough to drive. I bought my 02 s10 for $3800.00 with 168k on the odo.

Where was the 2002 Chevy’s 10 last serviced?

1st owner drove an estimated 0 miles/year • 2nd owner drove an estimated 0 miles/year • 3rd owner drove an estimated 0 miles/year • 4th owner drove an estimated 0 miles/year • 5th owner drove an estimated 0 miles/year. Last serviced at 194,841 miles in Osage City, KS on 08/17/18 • Vehicle serviced.

What causes a p0507 DTC trouble code?

There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates. A P0507 DTC trouble code may be caused by one or more of the following: Leaking air intake after the throttle body A faulty positive crankcase ventilation (PCV) valve

Why is my Chevy S10 engine stalling out?

This can be caused by the fuel pump or fuel filter. If your Chevy S10’s engine timing is off, it’s going to stall out, misfire, and altogether not run properly. Here are some of the more common causes of an engine timing problem: VVT Problem – Many modern engines are equipped with Variable Valve Timing.

What kind of engine is in a 1991 Chevy S10?

It’s a 1991 Chevy S10, 2WD P/U, 2.5L I4 engine with around 185,000 miles on it. It’s the Iron Duke engine, a throttle body injection motor. I’m not a mechanic, please forgive me if I use the wrong terminology.

What can go wrong with a Chevy S10?

The internal combustion engine is so complex that even the slightest problem can potentially disrupt the power delivery in a very serious way. While there are things that can go wrong with any car, every car also has its own “Achilles heel” for that specific engine, and the S10 is no exception.

What to do if your Chevy S10 is stalling?

Before troubleshooting any automotive issue, including stalling issues with the S10, make sure that you check the vehicles trouble codes with an OBD2 scanner. Trouble codes are always a great place to start diagnosing problems on today’s modern computer controlled vehicles. Without them, you are in the dark. These codes are vital to diagnosis.

Why is the intake manifold weak on the S10?

The intake manifold gasket is notably weak on many S10 year models. While this not only can disrupt the air pressure and air flow of the intake manifold, which is not a welcome problem, it can also allow coolant to leak into the combustion chamber.

Where is the throttle position sensor on a Chevy S10?

Your Chevy S10 uses a series of complex sensors to report what is going on to the ECU. The ECU then uses this information to adjust the timing, air fuel mixture, and more. When one of them goes wrong, it can lead to stalling for sure. Throttle Position Sensor – The throttle position sensor is typically located on the gas pedal.

What does a fault code mean on a Chevy S10?

The computer on your Chevy S10 ultimately controls a variety of vehicle functions from air and fuel delivery to generating and storing fault codes. When the computer generates a fault code, it means that there is something wrong with one of the vehicle’s critical systems—typically a sensor related to the emissions control system.

What’s the diagnostic code for a s 10 engine?

F for at least 4 seconds after the engine had been running for 2 seconds. 16 – System voltage high – Charging system voltage was either below 9 volts or above 17 volts for 10 seconds.

What is the idle speed of a 95 Chevy S-10?

I ran compression tests and all cylinders except #5 read around 105 – 110. Number 5 reads 95 +- 5. All plugs are new with only about 5 mins on them. When I pulled them to do the compression test they all are lightly coated with black soot. RICH, RICH, RICH.

F for at least 4 seconds after the engine had been running for 2 seconds. 16 – System voltage high – Charging system voltage was either below 9 volts or above 17 volts for 10 seconds.

Are there any problems with the Chevy 4.3 Vortec engine?

The 4.3 Vortec engines made from 1996-2002 (L35 and LF6) have been reported to have engine knock problems. In a properly functioning engine, fuel burns in even pockets instead of all at once. The pockets burn in even timing, in sync with engine cycles. Engine knock occurs when the fuel burns unevenly and out of sync with the engine cycles.

When does a S-10 engine signal is too high?

33 – MAP sensor signal voltage was too high (low vacuum) for 5 seconds when throttle opening was under 2%. 34 – MAP sensor signal voltage low – MAP sensor signal voltage was too low (high vacuum) when engine speed was over 1200 RPM, or the throttle angle was above 21% when engine speed was over 1200 RPM.

What was the rear differential on the Chevy S-10?

by Floyd Drake III. The Chevrolet S-10 pickup truck, one of the first compact models manufactured by a domestic auto maker, was equipped with three different rear-differentials, or rear ends. According to Chevy High Performance, the 7.5-inch was standard until 1993, when the previously optional 7.625-inch became standard.

Where can I find the VIN number on a Chevy?

The VIN also allows a user to get a build sheet of Chevrolet. Please check Chevrolet car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Chevrolet parts by VIN number.

What does the VIN number on a Chevrolet car mean?

Every Chevrolet car has a unique identifier code called a VIN. This number contains vital information about the car, such as its manufacturer, year of production, the plant it was produced in, type of engine, model and more.

The Chevrolet S-10 is a compact pickup truck from the Chevrolet marque of General Motors. It was the first compact pickup of the big three American automakers. When it was first introduced in 1982, the GMC version was known as the S-15 and later renamed the GMC Sonoma.

Are there any manuals for the Chevy S-10?

Every Manual available online – found by our community and shared for FREE. Enjoy! The Chevrolet S-10 is a compact pickup truck from the Chevrolet marque of General Motors. It was the first compact pickup of the big three American automakers.

The Chevrolet S-10 is a compact pickup truck that was produced by Chevrolet. It was the first domestically built compact pickup of the big three American automakers. When it was first introduced as a “quarter-ton pickup” in 1981 for the 1982 model year, the GMC version was known as the S-15 and later renamed the GMC Sonoma.

When did the Chevrolet S-10 Xtreme stop being made?

The SS was discontinued in 1998 and was replaced by the S-10 Xtreme for the 1999 model year. A 4.3 L V6 (which was optional on regular S-10s) was the standard engine used in the SS]

What does the trouble code mean on a Chevy S10?

A very common trouble code with the Chevy S10 is the P0440 code. This trouble code references a number that is given to you when you plug your S10 into a OBDII scanner. P0440 Indicates that something is wrong with the EVAP system. It does not allude to what that problem might be.

What does the p0440 stand for on a Chevy S10?

Chevy S10 P0440 Definition. P0440 is a universal OBDII trouble code. This means that regardless of which make or model of vehicle, the code will mean the same thing (S10 or not). The code technically stands for:

How to determine the engine code from the VIN?

How to Determine the Engine Code From the VIN on a Chevrolet Truck. Every car has a VIN, or Vehicle Identification Number, which provides specific information about the car. Within the VIN code for Chevrolet vehicles, the eight characters of the 17-character sequence provide information about the engine.

How many liters does a 1997 Chevy S10 have?

In 1997, Chevy S10 vehicles had different hardware, so the hardware options built for gasoline components distributed less fluid. As a result, a typical product for a 1997 Chevrolet truck will have 2.2-liter hardware. Because the liters are reduced, some products for a 1997 Chevy pickup may be built with four cylinders.

Where can I Buy Chevrolet S10 performance parts?

At Andy’s Auto Sport, we carry a huge selection of Chevrolet S10 parts. We have everything from affordable S10 aftermarket parts to high-end Chevrolet S10 performance parts. We have an excellent selection of S10 custom parts, like body kits, carbon hoods, custom seats, and rims, to name a few.

Who was the original owner of the Chevy S-10?

1st owner purchased on 02/28/01 and owned in IN until 01/24/07 • 2nd owner purchased on 01/24/07 and owned in IN until 07/10/07 • 3rd owner purchased on 07/10/07 and owned in IN until .

What kind of vacuum does a Chevy S10 use?

The engine in a Chevy S10 pickup truck relies on vacuum for various systems. If a vacuum line or tee should crack or become damaged to the point of leaking, the S10 may run poorly, or not at all.

Why is my vacuum line leaking on my Chevy S10?

The engine in a Chevy S10 pickup truck relies on vacuum for various systems. If a vacuum line or tee should crack or become damaged to the point of leaking, the S10 may run poorly, or not at all. Diagnosing and repairing leaks in the vacuum line system can seem difficult at first glance,…

When did the Chevy S10 pickup come out?

The Chevrolet S10 was the first compact pickup built in the U.S. for the American market. Introduced in 1982 in the wake of dramatic rises in the price of fuel, Chevrolet S10 MPG made it especially attractive to consumers. There have been three generations of this model over the past 30 years, along with variations that include an SUV version.

How can I tell if my Chevy S10 has a vacuum?

Pull the vacuum connector offf of the transfer case vacuum switch and check for vacuum there. Only one of the lines should have vacuum on it when you disconnect it. If you can get ahold of a vacuum pump, you can connect it directlty to the vacuum actuator to make sure the diaphram is not leaking when it is engaged.

Where does the vacuum come from in a 1988 S-10 4 cyl?

These are the vacuum diagrams for 1988 s-10 4 cyl…this ball is not for the brakes! If the brakes are acting up when you step on the pedal, test the check valve at the booster, vacuum source for brakes is from manifold…ALL doors on the heater plenum are operated by VACUUM!

Is there a diagram of the vacuum lines for a 2001 S10 2.2L?

Is a diagram of the vacuum lines for a 2001 s10 2.2l available anywhere? I have a line about 5″ long hanging loose right at my abs on the drivers side. I can’t find anywhere that it came loose from. Any ideas? look in your fender, there should be a vacuum canister….thats where it goes

Where is the 4WD switch on a Chevy S10?

One is the 4WD vacuum switch, located on top of the transfer case, and the vacuum actuator, I cannot obtain a diagram of that, but it is a simple vacuum circuit.

What is the VIN code for a Chevy truck?

Some of the more popular truck engine codes are C for a 6.2 diesel, F for 5.0 gasoline engine, R for a 5.7, and W for a 4.3. Use an Internet VIN decoder to find the engine specifications for your truck. Step 10 The 10th character indicates the year of the vehicle.

What kind of VIN does a Chevy Blazer have?

Select model: 490 AE AGILE ALERO ASTRA ASTRO AVALANCHE AVEO AVEO5 BEAT BEL BERETTA BISCAYNE BLAZER BONANZA BROOKWOOD C-K C10 C1500 C20

How to check the VIN number of a Chevrolet?

What to look for in a Chevrolet S10?

When it comes to your Chevrolet S10, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Remanufactured Engine product and part brands so you can shop with complete confidence.

Where do you find the VIN number on a Chevy 4.3 liter?

The tag, best viewed through the windshield from the outside, contains the 17-position alpha-numeric VIN code. Position eight of the VIN identifies the engine. According to the VIN equipment code listing at Angelfire.com, the letters “W,” “X” and “Z” are used to identify different variations of the 4.3L V-6. Locate the block casting number.

What do the letters on the vin mean?

Position eight of the VIN identifies the engine. According to the VIN equipment code listing at Angelfire.com, the letters “W,” “X” and “Z” are used to identify different variations of the 4.3L V-6. Locate the block casting number.

How to identify a Chevy 4.3 liter V-8?

Essentially a six-cylinder version of the small-block V-8, it is identified by first decoding the engine position in the Vehicle Identification Number, or VIN, and then by locating the engine block casting number and comparing it to a listing of known 4.3L engine castings. Find the VIN tag in the extreme corner of the driver’s side dashboard.

Where was the 1990 Chevy S10 short block built?

1990 s10 and fresh built short block 350. 1990 s10 clean and clear title. Bodys in great shape no cancer in it. It’ll come with a. . 60 over 350 short block, built and assembled at wades hotrod garage in maxbass. Was building a 388 stroker out of it.

Why was the Chevy S10 pickup truck made?

Chevrolet parts manufacturers design a variety of motors that are meant to increase the power, speed, and torque in your vehicle. Components for the S10 pickup truck are efficient because they’re built with commercial-grade hardware.

How many cylinders does a Chevy S10 have?

The 2003 Sonoma also has hardware that fits the S10 pickup. A typical engine option will produce practical results if properly equipped because a general product that fits a Chevy motor has six cylinders.

What kind of suspension does a Chevy S10 have?

Special suspension hardware is available for the Chevy S10, and this accessory can enhance handling during driving routines on rough roads. The main components that operate a suspension kit have air lift capabilities, and all of the suspension parts support up to 2000 pounds.

What kind of engine does a 93 S10 have?

I have a 93 S10 4.3 Automatic 2wd, I was driving and it just died, before that the engine idled high then low then smoothed out. Could not hear fuel pump kicking on and had it towed home. Next day put a fuel pump in it and a fuel pump relay, cranked it up before I put bed back on it ran and idled fine.

Is the Chevy S10 extreme 4.3 W misfiring?

11 people found this helpful. my 99 s10 extreme 4.3 W missed at the idle driving speed range for years got worse when it was damp outside.stomp down on the gas and fine.it also started and idled well it was just the normal driving range.

What was the misfiring code on my 1999 Chevy S-10?

First we replaced the plugs that were the wrong ones. With the computer conected we monitored the live data and were recordeing most of the misfires in cylinder 6, 4, 2 with an occational misfire on 5. We had no codes recorded in the ECM but the fuel trims were way off.

What’s the problem with my Chevy S10 4.3?

I have this same problem with my 99 s10 4.3. the code reader says miss fire cylinder #2… so I replaced wires, plugs, distributer cap and rotor. after 2 days this problem got worse. again I read the codes and it read the same code, cylinder #2. good old GM I guess 71 people found this helpful.

Why does my Chevy S10 have a misfiring gasket?

“The dreaded mystery coldstart misfire.” I like many others had the shudder between 1500-1800 rpms until the engine came up to operating temperature. I just found the root of all evil hiding under the EGR valve. Removed EGR to clean and realized there was a blow by in the gasket.

Why did my Chevy S-10 misfire in the morning?

My morning misfire was caused by a bad intake manifold gasket (a very common problem with most gm models around 2000 model year. Caused by crappy dexcool coolant ). After sitting overnight a small amount of coolant would get into right rear cylinder. It would miss for a bit and then run fine. Doesn’t have to be leaking a lot either.

What kind of truck was the 1988 Chevy S10?

The 1988 Chevrolet S-10 was one of the model-year entries of the compact pickup truck’s first generation of production, which lasted from 1982 to 1993. There were eight versions of the vehicle, varying by cab size, bed size and drivetrain options between the two/rear-wheel (2WD) and four-wheel drive (4WD).

What kind of fuel spray does a 1988 S10 use?

1988 S10 2.5 TBI, 5 speed. No fuel spray from injector. Got this for my step son who is 1st year electrician apprentice. The vehicle is old and worn, but didn’t burn oil. Before it died there was an issue with chugging, it would shake and buck and rattle the whole drivetrain real bad.

What was the problem with the 1988 S10?

Original problem was slow starting, had to crank about 15 seconds before it would catch and run. Then it wouldn’t start without putting a small space heater next to the intake manifold 20 to 30 minutes. Then it would go like before after about 15 seconds cranking. Then it died on the road.

What does the VIN number on a Chevrolet S10 mean?