What does SVC tire monitor mean Chevy Cobalt?

This system notifies you if the tire pressure is too low. When you get the Service Tire Monitor warning, it indicates that there is a problem with the tire monitoring system itself. Id does not mean that the tire pressure is (necessarily) too low.

What does it mean when the SVC tire monitor light comes on?

This system notifies you if the tire pressure is too low. When you get the Service Tire Monitor warning, it indicates that there is a problem with the tire monitoring system itself. If you do get this warning message, the first thing you should do is check the actual tire pressure.

What does Service Tire Monitor System mean on a Chevy?

A TPMS or service tire monitor system, just lets you know when your tire pressure is too low or too high. Don’t ignore the warning signs. Tweet. The service tire monitor system is the sensor and the TPMS Module. You more than likely just have a bad TPMS sensor or sensors.

How does a GM tire monitor work on a Chevy Cobalt?

They shouldve asked you at least. When they install new ones, they will need to run a TECH II scan tool or equivalent for GM, then run their little tool that detects each sensor with a horn sound to alert tech that it found the sensor. You have to do this in this order: LF, RF, RR, LR, 2 horn honks to start and 1 per each wheel.

What is the Left Front turn signal on a Chevy Cobalt?

The left front turn signal will also be illuminated. • On vehicles equipped with keyless entry, simultaneously press the keyless entry transmitters lock and unlock buttons until a double horn chirp sounds indicating the Learn Mode has been enabled. The left front turn signal will also be illuminated.

How to turn on Learn Mode in Chevy Cobalt?

Press and hold the SET/RESET button until a double horn chirp sounds and the DIC displays a TIRE LEARNING ACTIVE message indicating the Learn Mode has been enabled. The left front turn signal will also be illuminated.

What does low tire pressure signal mean on Chevy Cobalt?

A double horn chirp will sound and the low tire pressure indicator will begin to flash, indicating the learn mode has been enabled. • Hold the antenna of the J 46079 aimed upward against the tire sidewall close to the wheel rim at the valve stem location.

How to relearn tire positions on Chevy Cobalt?

• On vehicles not equipped with keyless entry, press and release the driver information center (DIC) INFO button until the RELEARN TIRE POSITIONS message appears on the DIC display. Press and hold the SET/RESET button until a double horn chirp sounds and the DIC displays a TIRE LEARNING ACTIVE message indicating the Learn Mode has been enabled.

Can you reset the TPMS sensor on a Chevy Cobalt?

If you replacing a spare tire with a road tire containing the TPMS sensor on your Chevy Cobalt, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. Depending on the vehicle model you have, here are a few ways to reset the TPMS.