What does no bus mean on a pt cruiser?
What does no bus mean on a pt cruiser?
“NO BUS” means that your insturment cluster is not communicating with the onboard computer. Your cars have a “data bus” the same as a personal computer. It is basically just part of the Chrysler computers wiring system.
Why does my 2004 PT Cruiser keep stalling?
My Wifes 2004 pt cruiser began bucking and stalling, I took it to the shop ,they plug it into their computer and tell me the AC cooling fan itself was burned out causing the car to overheat and stall. So we replaced it and the car still does the same thing.
Where is the engine code on a PT Cruiser?
When I restarted the engine, the codes were gone and the engine ran like it suppose to. When the cam sensor came I installed it anyway and now the car drives fine. If you turn the key on and off three time in a row, your engine code will be displayed where the odometer is located. No need to go to a shop! 19 people found this helpful.
What causes engine light to come on on PT Cruiser?
11 people found this helpful. my 2007 pt did same thing, engine light came on , car was jerking and bucking, ( had nothing to do with the a/c or heat) it was the cam positon sensor, on line the part is 35.99 to 55.99 depending on where you buy it, local garage did mine part and labor for 162.00 29 people found this helpful.
What to do if your PT Cruiser dies?
My battery died on my 2005 PT CRUISER and once I charged it I got a code P0340. Purchased OEM parts from Amazon and Chrysler to replace the Cam Sensor and Cam Magnet. Install the cam magnet, put dielectric grease on all the plug in connections, push down all the fuses in the fuse box and put the unit back together.
What happens when the cluster goes off on a Chrysler Sebring?
Cluster goes off randomly, and starts to work again, randomly. Sometimes it stays off longer than other times. For instance, this time they’ve been off for about 2 straight weeks! The only thing thats lit is where it shows how many miles on the car, and P,R,N,D.
What should I do about my Chrysler Sebring CRD?
For my Chrysler Sebring 2007 CRD I repaired the dashboard lights using this part http://dodgecaliberinstrumentclusterlight.blogspot.de/
What to do when your traction control warning light comes on?
If a fluke in the TCS system triggered the warning light, it should turn stay off when you restart the engine. If it comes back on, it’s likely time to call a mechanic and get a system diagnosis. Until it’s fixed, drive gently and avoid hard acceleration that could result in the wheels slipping.
When does the TCS warning light come on?
The TCS warning light will pop on when the system detects a loss of traction, like in snowy or rainy weather. Typically the light is seen when the system intervenes to maintain traction. It may light up for a brief period and then go off, or it may flash while it is operating.
