What does Engine code P1860 mean?
What does Engine code P1860 mean?
P1860 Meaning The solenoid receives ignition voltage through circuit 239. When the PCM detects a continuous open, short to ground or short to power in the TCC PWM solenoid valve circuit, then Diagnostic Trouble Code (DTC) P1860 sets. DTC P1860 is a type B DTC.
What does the p1860 code on a Chevy mean?
P1860 CHEVROLET Meaning The Torque Converter Clutch Pulse Width Modulation (TCC PWM) solenoid valve controls the fluid acting on the converter clutch valve. The converter clutch valve controls the TCC application and release. The solenoid attaches to the control valve body within the transmission.
How much does it cost to repair a p1860 Chevrolet?
The cost to diagnose the P1860 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
When to use the history code p1870?
……This may result in a harsh 1-2 shift with no history code if the conditions for setting the DTC required for the second trip are not met, on two consecutive trips (Ignition cycles, with a drive cycle). ……When the conditions for setting the DTC are met, on the second consecutive trip, a DTC P1870 is stored as a history code.
What causes check engine light and trouble code p1860?
GM has issued a technical service bulletin 01-07-30-002C for the vehicles listed below. GM has advised that the most likely cause for a check engine light and trouble codes P0740, P0753, P0758, P0785, and P1860 may be a faulty ignition switch that causes an open circuit to the transmission.
The cost to diagnose the P1860 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
How much does it cost to diagnose a p1860 code?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1860 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P1860 code detected?
What does p1860 mean on a torque converter?
P1860 Meaning. The Torque Converter Clutch Pulse Width Modulation (TCC PWM) solenoid valve controls the fluid acting on the converter clutch valve. The converter clutch valve controls the TCC application and release. The solenoid attaches to the control valve body within the transmission. The solenoid receives ignition voltage through circuit 239.
