What does 3C mean on a washing machine?

What does 3C mean on a washing machine?

Samsung malfunction 3E or 3C With error message 3E or 3C the motor does not work. Therefore first check whether the socket works. Switch off your washing machine and remove the plug. Test whether another device is receiving power. Another cause for the malfunction may be that the washing drum is too full.

How do you reset the error on a washing machine?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

How do you drain a washing machine?

If not, follow these steps:

1. Step 1: Turn off the power and lay down towels. For safety, unplug the machine.
2. Step 2: Locate the drain hose at the back of the washing machine.
3. Step 3: Drain the water.
4. Step 1: Turn off the power and lay down towels.
5. Step 2: Locate the drain hose.
6. Step 3: Drain the water.
7. Step 4: Scrub the filter.

How do I fix E3 error on my washing machine?

How To Fix 3E Samsung Washer Error Code:

1. Unplug The Washing Machine: Unplug the washer for 2-3 minutes.
2. Check Wire Connections On Drive Motor: One fairly common issue that causes the 3E error code is connection problems.
3. Check Wire Connections On Control Board:
4. Check Hall Sensor:

How do I fix UE error on LG washer?

1. Run rinse and spin cycle without load. Empty the drum completely. Power the unit on.
2. Request Repair. If the uE or UE error displays again, the unit is not working properly; it requires a repair service.
3. Leveling, load distribution, and selected washing cycle. The unit does NOT require a repair service.

How do you test a washing machine fault?

How to Check to see if your Washing machine bearings are worn.

1. Appliance is leaking.
2. Appliance will not start.
3. Clothes are damaged after washing.
4. Clothes are still dirty.
5. Door will not open at end of programme.
6. Drum will not rotate.
7. Machine overfills and floods.
8. No water entering machine.

Why won’t my washing machine drain UK?

One of the most common causes of a washing machine that is unable to drain water properly is the presence of an object stuck in the drainage pump or a filter blocked with dirt.

What are the error codes for an AEG dishwasher?

AEG 55750 Dishwasher Error Codes Error Codes Possible causes A Water tap closed, inlet hose filter bloc C Drain hose, coarse or fine strainer or s E Water pressure too low, water tap not co E2 Call AEG Service force

What to do if your AEG dishwasher says F3?

– the flood protection system has activated When in operation the fault message F3 appear in the multi display. First close the water tap, then pull out the power plug. In case of hard-wiring: turn off the electricity supply, remove the fuse and disconnect. Telephone AEG Customer Service Department to register the fault.

What is the fault code on my dishwasher?

Fault code C3 is displayed on the multidisplay. The leak prevention system has been triggered. Close the tap and contact customer service. The indicator is illuminated. The indicator is only intended to remind you to check the filter in the dishwasher from time to time and, if necessary, to clean it.

How did the company AEG get its name?

The AEG brand has been in existence for more than a century. It was found by a talented engineer named Emil Rathenau. In 1883, he originated the production of electric lamps. The company got its name (Allgemeine Elektricitäts Gesellschaft) in 1887. Enterprise made a great contribution in German electrification development.