Easy tips

What are the warning lights on my GMC?

What are the warning lights on my GMC?

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by GMC.

Where are the lights on the dashboard located?

Most vehicles have a dashboard lights control switch that will dim the dashboard lights, as well as turn them off. Check the control switch, which should be located on the console near the steering column or part of the headlight switch. Tail lights and dash lights are connected through the tail light (and/or brake light) fuse.

Why are the lights on my dash not working?

Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.

What does a GM dash without head up display look like?

Description: With head-up display, with keyless start titanium. Description: Without head-up display, without keyless start titanium. Description: Without head-up display, without keyless start black. Description: With head-up display, without keyless start cashmere. Description: With head-up display cocoa/choccachino.

What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by GMC.

What kind of parklight does a Chevy Blazer have?

Custom Parklight Sets 1982-93 Chevy S10 1982-93 1983-94 Chevy Blazer Electronic Flasher … For LED Lights Projector Headlight and …Projector Headlight and Parklight Sets 42-1624 and

What are the warning lights on my dashboard?

So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one.

Description: With head-up display, with keyless start titanium. Description: Without head-up display, without keyless start titanium. Description: Without head-up display, without keyless start black. Description: With head-up display, without keyless start cashmere. Description: With head-up display cocoa/choccachino.

Why is the battery light on but the alternator is charging?

1 Check for Corrosion. In some car models, the fumes from the regular functions lead to corrosion to collect on the battery terminals. 2 Clean the Car Battery Terminals. If you notice some corrosion or grime around the battery terminals, it might be the reason why the car battery light is still on. 3 Tighten the Battery Clamps. …

Why is the odometer not working on my Chevy truck?

All the gauges (minus the broken speedometer) spike high to low. Sometimes the odometer/message center will work, but not display the correct mileage when it does work. My main battery was dead today. I noticed that the odometer display was still on when I turned the truck off; it was just a few bars of color on the display.

Is there a problem with my GMC guage?

That took care of my security issue I had a few weeks back. This almost sounds like the problem that im having, Did you figure it out?

What is the 4×4 dash light indicator on a Silverado?

Have a 2006 Silverado , 5.3. push button 4 wd, when engaged in any 4 wd settings my indicators light does not come on, checked fuses, what do i need to ck next. Thank you. Have a 2006 Silverado , 5.3. push button 4 wd, when engaged in any 4 wd settings my indicators light does not come on, checked fuses, what do i need to ck next.

How to fix a PRNDL light on a GMC Truck?

To fix this problem, remove the cluster from the vehicle. Then remove the instrument cluster housings, see the most current repair information for the vehicle you are working on. . Inspect the PC solder joints (circled area) carefully with a magnifying glass. Lookin for cracks in the solder at the top or bottom.

Why does my 4×4 dash light not come on?

Maybe the light is a response to indicate the 4wd is actually engaged and yours isn’t hooking up. Just a thought. Have a 2006 Silverado , 5.3. push button 4 wd, when engaged in any 4 wd settings my indicators light does not come on, checked fuses, what do i need to ck next. Thank you.

Where is the brake warning light on my Audi Q7?

In most vehicles this switch is located in the master cylinder. You’ll see a harness plug in somewhere around there. Some vehicles will now activate the brake warning light on the dash if the actual brake lights behind it go bad. Check to see that both of them are lighting up. If not, try replacing the bulb and see if that solves the problem.

How do you turn off the brake light on a Chevy Silverado?

The only way to turn the brake light off is to restore proper line pressure to both brake circuits when the pedal is pushed. If your Silverado is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic.

What does the check engine warning light mean?

The check engine light will usually come up in an orange, yellow or amber colour depending on the manufacturer, and a flashing light usually means there is a more serious issue. A flash when starting the car isn’t an issue, it’s just a check by the ECU to make sure the system is working. Can I just ignore a check engine warning light?

Can a check engine light get clogged up?

The EGR valve can get clogged up or fail entirely. If you’re even slightly mechanically inclined, you can remove the valve, clean it up, and reinstall it in a relatively short amount of time. If the valve needs to be replaced, expect to pay at least $125 for a brand-new, OEM-quality unit.

Why is my Check Engine light on in my Bugatti Chiron?

The monstrous Bugatti Chiron has 16. No matter how many you have though, a malfunctioning coil will almost certainly trigger the check engine light, but remember, if your car burns diesel, you have neither ignition coils nor spark plugs.

Why does my check engine light keep coming on?

The Check Engine light will also come on if your mass airflow sensor fails This can happen if your air filter has not been replaced on a regular basis. If this is the problem and you continue to run your vehicle with the Check Engine light on and the airflow sensor is failing, you’ll be creating more problems.

What’s the best way to reset a check engine light?

In such a case, it is highly recommended to check the codes with a scanner instead. Switching the ignition on and off is also one method of hard reset without disconnecting batteries. Put the keys in your ignition and turn your ignition on and off consecutively after a second in each step.

How do you install a new dash on a Chevy truck?

To install it: Remove the bolts and clean the bolt threads and the ends of the wire attachments and clean down to the frame using a wire brush. Reattach the wires to the frame. Pull out the dash’s outer trim far enough that you can reach in and pull out the old switch.

What to do when your dash lights wont work?

If both sides of the T/L CTSY fuse are hot – verify that the T/L CTSY fuse is making good electrical connection in the fuse block, then locate and repair the open in the orange wire between the T/L CTSY fuse and the headlamp switch connector.

How to repair a 1988 GM Truck wiring diagram?

Access our GM Full-Size Trucks 1988-1998 Wiring Diagrams Repair Guide by creating an account or signing into your AutoZone Rewards account. Once you sign in, follow these instructions to access our Repair Guides. Add your vehicle in Manage My Vehicles. Enter your vehicle details.

What to do if the dash brake light is on?

If the instrument panel light is on, to retrieve RWAL codes connect a jumper wire between terminal H and terminal A of the ALDL connector with the key on (engine not running). Watch the dash brake lamp and count the blinks. Sometimes RWAL system send out a phantom blink before the code blinks start.

Why is the warning light on my Chevy c2500 not working?

The most obvious culprit is the switch located immediately under the parking brake pedal. If this malfunctions, the warning light may glow even if the brake has been released. Check this first and rule it out as a possible cause. This is a known issue on Chevy C1500 pickup trucks equipped with rear-wheel anti-lock (RWAL) brake systems.

Why does the dashboard warning light keep glowing?

Naturally, the first step is to consider the obvious reasons why that dashboard warning light keeps glowing. The most obvious culprit is the switch located immediately under the parking brake pedal. If this malfunctions, the warning light may glow even if the brake has been released. Check this first and rule it out as a possible cause.

What is the yellow light on a GM starter interrupt?

In this article, we are concentrating on factory-installed GM starter interrupt systems. This type of anti-theft system is designed to prevent the vehicle from starting unless the correct ignition key is used. These systems used a dash-mounted “security” or “theft” light which can be yellow or red in color.

When does the Toyota Corolla security light go off?

If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine.

What should I do if my PassLock security light goes off?

If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine. If it starts and runs, everything is okay.

What happens when you hit the gas pedal at the last light?

You’re running a little late, but sitting in pole position at the last light before hitting your employee parking lot. So when the stoplight turns from red to green, you punch the gas pedal, hoping to sail through the intersection a little, um, faster than usual. But instead of moving when you hit the gas pedal, your car hesitates.

Why does my traction control light keep coming on?

If the road conditions are too severe, your traction control system may not be able to handle it. For instance, if you live in a location with a lot of snow and ice on the ground, then the roads are going to be difficult to maintain traction on.

Is it normal for the security light to go off when the engine is running?

After the learn procedure is completed and the engine is running, the security light may stay on steady for a few minutes and then go off—this is normal. Depending on the system, replacement of key components will necessitate that a relearn procedure be completed.

What should I do if my Toyota Corolla security light goes off?

The ten-minute procedure involves trying to start the engine. If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine.

Where is the seat belt warning light located?

As already mentioned, the seat belt warning system is an electrical circuit that is remaining open and triggering the warning. One common place where this circuit is broken is under the seat. Located under the drivers seat, or sometimes the passenger seat on certain vehicles is the airbag and SRS (supplemental restraint system) unit.

Are there any GMC drivers seat replacements left?

Only 4 left in stock – order soon. . Only 2 left in stock – order soon. . Only 20 left in stock – order soon. . . . Only 2 left in stock – order soon. . Only 19 left in stock – order soon. . . Only 6 left in stock – order soon. . Only 20 left in stock – order soon.

Can a seat belt warning light fail a MOT?

The seat belt warning light refusing to go out even when buckled up should not fail an MOT. In order to pass an MOT though, it’s important to ensure that all seat belts are in good working order and that they are free from rips, tears and any signs of wear-and-tear.

Why does the seat belt not on warning light not turn off?

Sometimes, the seatbelt switch can get stuck or broken and the light won’t turn off. Clean out the buckle or replace it, if necessary, and everything should return to normal. Is it safe to drive with the seat belt not on warning light on?

Only 4 left in stock – order soon. . Only 2 left in stock – order soon. . Only 20 left in stock – order soon. . . . Only 2 left in stock – order soon. . Only 19 left in stock – order soon. . . Only 6 left in stock – order soon. . Only 20 left in stock – order soon.

How many GMC drivers seats are in stock?

Only 20 left in stock – order soon. . . . Only 2 left in stock – order soon. . Only 19 left in stock – order soon. . . Only 6 left in stock – order soon. . Only 20 left in stock – order soon. . Only 15 left in stock – order soon. . . . Only 17 left in stock – order soon. . Only 14 left in stock – order soon. . Only 15 left in stock – order soon.

Why is the Dashboard Light on in my car?

It could indicate the difference between life and death in case your car is involved in a car accident. Many drivers don’t put any effort to explore why a dashboard light is on. More…

How to fix no communication problems on 2008 GM?

Let’s say BCM module is the suspect. Disconnect S3 after connecting S2 and see if voltage goes back to normal. If it is, then the BCM is the real problem. When testing HIGH SPEED BUS LINES OR MODULES on the right…you can use an ohmmeter and hook up the ohmmeter leads between DLC pin 6 and pin 14.

Is there a no communication fault on my Silverado?

When testing NO COMMUNICATION fault message from your scanner, please use this as your guide. With a voltmeter handy, you can prevent garages from charging you expensive rates to fix this problem. Shown above is the DLC data bus communication network of a 2008 GM Silverado Truck.

Is there a DLC connector on a 2008 Chevy Silverado?

Shown below is a 2008 GM Silverado truck bus network diagram for the DLC connector. When testing NO COMMUNICATION fault message from your scanner, please use this as your guide. With a voltmeter handy, you can prevent garages from charging you expensive rates to fix this problem.

Why is my turn signal not working on my Sierra 1500?

If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn’t blink at all / stays stuck when engaged, this is your Sierra 1500’s way of telling you that a turn signal bulb is burnt out.

When to replace reverse light on GMC Sierra?

Replace reverse light White light when you back up – yup, they burn out and you can replace them with bright LEDs 2007 GMC Sierra 1500 SLE 4.8L V8 Extended Cab Pickup (4 Door) Plug minor coolant leaks Leaking coolant is usually a sign that your water pump needs to be replaced.

How do I Reset my GMC Buick horn?

4b) If using a VT5 trigger tool, hold down the center button until the horn sounds. 4c) If using a VT15 trigger tool, press the left button, wait until the horn sounds, then press the right button. – The horn sound lets you know that the vehicle just registered that sensor.

Why does my car have white smoke coming from under the hood?

Here’s what you need to know if you witness white smoke, black smoke, burning smell coming from your car, or if it is simply steam from a hot engine on a cold day. Internal combustion engines have many different components that are responsible for helping power the vehicle.

Where did the white smoke come from under the hood?

Yesterday I made a 3 hour round trip with my car, and on the last leg coming back into town, I noticed my check engine light came on, and I saw white smoke coming from underneath the hood of my car, along with a burning smell. Luckily I was able to make it home just fine.

Is the light on my smoke detector supposed to be red all the time?

Most battery powered smoke detectors do not have a light on all the time. However AC powered ones may, depending on the brand. If you don’t have the owner manual that came with it, look up the model number on the back of the detector and then Google it.

Yesterday I made a 3 hour round trip with my car, and on the last leg coming back into town, I noticed my check engine light came on, and I saw white smoke coming from underneath the hood of my car, along with a burning smell. Luckily I was able to make it home just fine.

What are the warning lights on a ram?

The following are warning lights and indicators found in vehicles built by Ram. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 70 of them so be patient!

How big are the indicator and warning lights?

Indicator Lights, LED, 0.156 in. Diameter, One Blue Bulb, Two Green Bulbs, Set of 3 Warning Light Kit, Quick-Light, Oil Pressure, Red Lens, Chrome Housing, 3/4 in. Diameter, Kit Indicator Light, Interior, Green LED, Chrome Housing, 0.500 in. Diameter, Each

So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one.

Why are the warning lights on my car not working?

One or more dashboard warning lights don’t work. If one or more warning lights fail to illuminate when you first turn the key on, it usually indicates a blown bulb. If none of the lights come on at all, check the fuses and wiring to the instrument cluster first.

Why are the dashboard lights on my Chevy not working?

If the dashboard lights in your Chevy are dim, chances are you can fix it yourself. If it’s light out, make sure that the headlights aren’t turned on. Many headlights often dim the dash automatically when they’re switched on, so this might be the cause of the problem. If that’s not it, look for the dimmer switch.

Why does my GM car say no start no crank?

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

What happens when all the dash lights come on?

When driving, occasionally all the dash lights will come on, but the gauges like gas, battery, and mileage, will all drop down to zero. Then my radio shuts off. Fortunately, the car keeps driving. All of this happened today, at a busy intersection, right before a stop light.

Is the gear shift indicator dim on my Silverado?

My gear shift indicator lights are out and odometer lights are dim on my 04 Silverado. Does anyone know what circuits to solder? Are you sure your dimmer isn’t all the way down?

Why does my shift indicator not change from Park to drive?

The first issue is that the electronic shift position indicator in the instrument panel cluster is not accurately changing when I’m shifting. For example, I will shift from Park to Drive and the display will stay on P or move to N, then when I begin to drive the display will change from P or N to D.

Why does my GMC Duramax not shift at all?

It is saying “service brake system” on the cluster and the abs and brake light is on. It has started doing all of this at the same time. Bump. Anyone have any ideas? I’m going to get an nsbu switch tomorrow and see if that will fix it. Do these sounds like symptoms of the nsbu switch?

The first issue is that the electronic shift position indicator in the instrument panel cluster is not accurately changing when I’m shifting. For example, I will shift from Park to Drive and the display will stay on P or move to N, then when I begin to drive the display will change from P or N to D.

To fix this problem, remove the cluster from the vehicle. Then remove the instrument cluster housings, see the most current repair information for the vehicle you are working on. . Inspect the PC solder joints (circled area) carefully with a magnifying glass. Lookin for cracks in the solder at the top or bottom.

Are there any problems with the GM gauge clusters?

The next most common problem seen on GM instrument clusters are failing digital displays. This problem is unrelated to the stepper motor problem but is often seen in the same clusters. Most GM gauge clusters of this time frame have two digital displays – the odometer and the gear indicator (commonly called the PRNDL screen).

Where is the turn signal indicator lens located?

This is the thin plastic green lens inside you cluster housing for the turn signal indicator. Sold as each, 2 required. This is the thin black plastic bezel that trims out the speedometer, optional tach, gauges or warning lights.

Where is the high beam indicator on a Chevy truck?

This is the thin plastic blue lens inside your cluster housing for the high beam indicator, its located directly behind the speedometer at the top. This is the foam spacer that fits overtop of the high beam blue lens indicator in the dash to hold the lens in place.

Which is the diagnostic code for a GMC check engine light?

1 Refer to our Generic OBD II code list for definitions on all other GMC diagnostic trouble codes. 2 Manufacturer Specific Codes 3 P1031 4 P1032 5 P1105 6 P1106 7 P1107 8 P1108 9 P1109 10 P1111

How does the Check Engine oil level light work?

Just like the windshield washer level indicator, it is only a mechanical switch. When liquid is added and the level rises, the switch turns off. You have damaged the contact/wiring/plug and the level system is indicating low. that is what I believed originally, Ray, but wanted to be sure. Are you aware of any dedicated fuse for that function?

What does the four wheel drive indicator light mean?

What the four wheel drive indicator light means. When you engage the four wheel drive, a corresponding light is illuminated on the dash. Vehicles with multiple gear ranges will also indicate what range has been selected. High and low are commonly abbreviated to “hi” and “lo” respectively.

Where is the trouble code on a GMC?

When retrieving GMC trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on.

Is there a way to clear check engine light codes?

You might have stalling and hard shifting problems for a while after reconnecting the battery. It will usually recover automatically, but it can take several drive cycles for this to happen. An easier way to clear the check engine light codes is to use an auto scan tool. These scanners have come a long way and now include better documentation.

GM vehicle owners, for example, have complained of warning messages from the Electronic Stability Control (“ESC”) system, Anti-Lock Braking System (“ABS”), “Check Engine” lights, and other warning messages.

When retrieving GMC trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on.

You might have stalling and hard shifting problems for a while after reconnecting the battery. It will usually recover automatically, but it can take several drive cycles for this to happen. An easier way to clear the check engine light codes is to use an auto scan tool. These scanners have come a long way and now include better documentation.

Where is the transmission pan located on a car?

The transmission pan will be on the bottom part of the transmission. This pan is bolted onto the transmission by several bolts around the lip of the pan that should be visible. Look across the bottom of the transmission pan.

Where is the transmission pan on a 4L60E?

Crawl under your car and locate the transmission. This will be in about the center of the car’s undercarriage. The transmission pan will be on the bottom part of the transmission. This pan is bolted onto the transmission by several bolts around the lip of the pan that should be visible.

How can I tell if my transmission pan is shallow or deep?

Check for any insignia on the transmission pan. A deep transmission pan might have some kind of insignia stating that it is a deep pan. This depends on what brand of deep pan you’re looking at. Measure the transmission pan. A shallow transmission pan will be about two inches deep.

Where is the reclining control on a Chevy Silverado?

•Move the seat forward or rearward by moving the horizontal control forward or rearward. If your vehicle has power reclining seatbacks, the control is located rear of the power seat control on the outboard side of the seats. Adjust the angle of the seatback by pressing the vertical control forward or rearward. See Reclining Seatbacks on page 1-6.

Where is the AFM deflector located on a GM Truck?

This valve is located on the oil pan rail and prevents excessive oil pressure from negatively impacting the AFM components. The original version sprayed oil on the cylinder walls and increased oil consumption. In 2010, GM added a deflector (p/n) NAL-12639759to redirect in into the pan.

Where is the oil deflector valve on a GMC ACM?

This valve is located on the oil pan rail and prevents excessive oil pressure from negatively impacting the AFM components. The original version sprayed oil on the cylinder walls and increased oil consumption. In 2010, GM added a deflector (p/n) NAL-12639759 to redirect in into the pan.

The Check Engine light will also come on if your mass airflow sensor fails This can happen if your air filter has not been replaced on a regular basis. If this is the problem and you continue to run your vehicle with the Check Engine light on and the airflow sensor is failing, you’ll be creating more problems.

How to clear service engine soon light 1990 to 2002 Chevy?

If playback doesn’t begin shortly, try restarting your device. As an Amazon Associate I earn from qualifying purchases. I am a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means to earn fees by linking to Amazon and affiliated sites.

Why does my GM car have a reduced engine power warning?

Some GM vehicles will enter Reduced Engine Power Mode when the engine begins to overheat due to cooling system issues. The PCM triggers the mode to protect the engine from further damage. In some instances, the Reduced Engine Power warning may illuminate to inform the driver that the vehicle lacks power due to an underlying condition.

When does the Check Engine light come on?

You’re driving home from work one day when the car owner’s worst nightmare happens: the check engine light pops on. It comes without warning and with no explanation. For most drivers, this means a trip to the mechanic, but it’s not difficult to diagnose (and sometimes fix) yourself.

Why does my car make a warning chime while driving?

The first thing to do is to make sure the oil and coolant are filled up to prevent any engine damage. The problem may be caused by low oil but only if engine is oreal low on oil. The coolant… 2003 Nissan 350z code P0128 and had little smoke out my exhaust the night before the CEL came on. Any help? Hi Jesus. Thanks for sending in your question.

Is it okay to drive with a flashing check engine light?

It’s never recommended to drive with a flashing check engine light. A constant check engine light can be okay to drive with sometimes, but a flashing engine light is most likely a more serious problem that has to be fixed as soon as possible.

How often should I Change my Check Engine light?

Spark plugs should be replaced approximately every 25,000 miles to prevent their eventual failure. A diagnostic test can determine if the spark plugs are the reason the Check Engine warning light has come on. Our Cardinale GMC Service technicians can replace your spark plugs and reset your vehicle’s computer.

What causes a flashing check engine light on a GMC Sierra?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Sierra’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped .

What should I do if my GM solenoid lock up?

Connect the alligator clip of your test light to ground. Unplug the wires at the case and place the tip of your test light on the terminal marked A. Do not depress the brake pedal. Computer controlled vehicles: turn on the ignition and the tester should light. All other vehicles: start the engine and bring to normal operating temperature.

What causes a GM torque converter to lock up?

Most of the time it is a stuck Torque Converter Clutch (TCC) solenoid, but this is not the only cause of this problem. General Motors has issued a few Technical Service Bulletins (TSBs) relating to this problem. There is also a specific diagnostic procedure to determine the exact cause of the TCC problem.

Is there a transmission defect in a GMC?

An alleged GM transmission defect has gained more coverage as more owners complain of the issue in Chevy pickups, GMC vehicles, Cadillac sedans, and sports cars. Sign In

When do traction control lights appear on a Chevy truck?

Early to mid 2000’s Chevy trucks and suburbans have a common problem with the stabilitrak and traction control service lights appearing on the dash. For most truck owners, the warning lights occur frequently when the truck is idling and then disappears and reappears while driving.

An alleged GM transmission defect has gained more coverage as more owners complain of the issue in Chevy pickups, GMC vehicles, Cadillac sedans, and sports cars. Sign In

What are the warning signs of transmission issues?

Another warning sign of issues is when gears become difficult to shift or will not engage properly. Any of these issues, accompanied by your check engine light coming on, is grounds for concern. You certainly don’t want any of your transmission issues getting any worse.

Why does the Check Engine light come on when you step on the gas?

If you step on the gas and your vehicle doesn’t seem to respond or want to go anywhere, there is a 50-50 chance that there is a drivability problem with the way the engine is running. This can result in a lack of engine power, or the transmission will not respond because there is a problem with it.

When do the warning lights come on in a car?

Warning lights come on when there could be a problem with a vehicle function. Some warning lights come on briefly when the engine is started to indicate they are working. Gauges can indicate when there could be a problem with a vehicle function.

When does a GMC pickup truck have an issue?

Often, this takes the form of the heater turning on unexpectedly or the system blowing hot air when it should be blowing cold. The cause of this issue is a failure of air delivery or temperature mode door actuators. Fault codes can help you make sure this is the cause of the problem. This issue usually begins to occur after around 125,000 miles.

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

Why are the cluster gauges going out on my GMC?

Sounds like the cluster gauges are beginning to crap on you. Common problem on the 02 to 04 trucks. Time to get the new updated style which has the corrected problem on the cluster gauge. This is was a factory recall and is covered by GM, both my dads and mine went out and were replaced for free, take it in.

Is there an insturment cluster issue on my Silverado Sierra?

Sometimes it is almost a bright flash while everything is failing. Also, at other times everything will appear to be working fine and the mileage screen will go off and the ‘PRND321’ screen will go black and the gauge needles will become stuck and will not move. Other times while cranking the truck the gauges will be completely unresponsive.

What do the warning lights on a car mean?

Often gauges and warning lights work together to indicate a problem with the vehicle. When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do.

Why are all the gauges on my GM Truck not working?

Last night I was comin home from the store and realized my speedometer wasn’t working (ins’t the first time) so i hit the dash, then realized NONE of the gauges were working.. Gas gauge, almost empty. Water temp, cold. No oil pressure. The alt wasn’t charging. No tac and no speedometer.

What should I do if my instrument cluster lights are not working?

If the same mileage cannot be set, the law requires that the replacement odometer be set at zero and a label be installed on the drivers door frame to show the previous odometer reading and the date of replacement. The instrument cluster includes the following components:

When do GM dashboard lights go off for no charge?

THIS BULLETIN IS BEING REVISED TO INCLUDE CERTAIN 2005 MODEL YEAR VEHICLES IN THE U.S. ADDITIONALLY, FOR U.S. 2003-2005 MODEL YEAR VEHICLES, GM WILL PROVIDE THE INSTRUMENT PANEL CLUSTER (IPC) ONLY, AT NO CHARGE TO THE CUSTOMER FOR VERIFIED FAILURES BETWEEN 70,001 MILES (110,001 KM) AND 80,000 MILES (130,000 KM).

Why is my Car Cluster not working on my 1994 Concorde?

I have a 1994 Chrysler Concorde 3.5 and my cluster isn’t working at all. when you crank the car the speedometer jumps just a tiny bit, but if you press the gas pedal the rpm gauge doesn’t move. Also when you drive the car, the speedometer and the rpm gauge doesn’t move. Everything light wise works.

Why does the instrument cluster shut off intermittently while driving?

The batt light goes on and the entire instrument cluster (spedo fuel turbo temp etc ) shuts off .. when it’s off the climate control won’t work and the sun roof won’t work . Sometimes the abs light comes on before it shuts off. Turns on and off intermittently. I’ve checked fuses and cleaned battery connections and ground connections .. please help

Last night I was comin home from the store and realized my speedometer wasn’t working (ins’t the first time) so i hit the dash, then realized NONE of the gauges were working.. Gas gauge, almost empty. Water temp, cold. No oil pressure. The alt wasn’t charging. No tac and no speedometer.

Why is my brake light not working on my GMC Sierra?

These thin wires can become corroded and break, especially if you live in the Northern states where road salt is a plenty in the winter. As the previous reply stated- check the fluid first. If all is good, you could contact a GM dealership and have them scan your system with a Tech2 scanner.

What to do if your GMC Sierra has DTC?

As the previous reply stated- check the fluid first. If all is good, you could contact a GM dealership and have them scan your system with a Tech2 scanner. That would be able to tell you exactly what wheel is causing the trouble and DTC. ( diagnostic trouble code).

Why is my GMC Sierra not four wheel drive?

I have a 2004 GMC Sierra Truck. The transfer case will not engage into four wheel drive. I took it to a GMC dealer and they are saying that is internal, but can not diagnois it until it is taken apart. Anyone have any suggestions?

Why is the brake light flashing on my GMC Truck?

My brake light flashing was an electrical connection issue at the parking brake. Fixed it and now the light is off. All is good. Did you find the recommended reading relevant to this discussion?

Why is my parking brake light not working?

My sons moms 99 Sierra did thes a month or so ago. Turned out to be a leak where the single brake line from the front of the truck splits into two lines on the rear axle. Today when I started my 2001 Suburban the parking brake light would not shut off.

What are the diagnostic codes for Shift Solenoid?

The most common one is the check engine light will be on with one of the following diagnostic trouble codes: P0751 1-2 Shift Solenoid Valve Performance (Shift Solenoid A Performance) P0753 1-2 Shift Solenoid Valve Electrical (Shift Solenoid A Electrical) P0756 2-3 Shift Solenoid Valve Performance (Shift Solenoid B Performance)

How to test shift solenoids on GM 4.3L?

In this article, I’ll show you how to test the transmission shift solenoids (specifically 1-2 solenoid and 2-3 solenoid) on your GM 4.3L, 5.0L, 5.7L pick up, van, SUV. You’ll be surprised just how easy it is to diagnose these shift solenoids when they have failed.

What causes your check engine light to not come on?

If your check engine light hasn’t come on, you may want to check the following: This other post examines in more detail the causes of an engine that won’t crank over. It has some simple tests to help you fix the problem. A loose or damaged fuel filler cap can cause your engine to stall. Photo in the Public Domain. III. My Engine Stalls

Why is my GM code not the correct code?

Engine cranking, then the PCM determined that it did not receive the correct frequency code from the Theft Deterrent Module. Engine cranking, then the PCM received a frequency code that did not match the code it received from the theft deterrent module.

Why is my shift gauge not working on my Chevy Silverado?

Gauges that are not working could mean a faulty ignition switch. This has been an issue on this truck series. A bad ignition means that there may not be full voltage available to activate the shift solenoids. Replacing the switch will cure the problem. Figure 1. Look for blown fuses or damaged wiring.

What should I do if my transmission won’t shift?

Your transmission is just supposed to shift and leave you alone. When it fails to do so, you naturally get upset either because of the trouble you are not looking for or the fear of how much the fix may cost. Before your day turns grim, let’s take a look at some things that may be going on. Don’t tense up too much just yet.

Can a Chevy Silverado go from 1st to 4th shift?

Transmission is in Limp Home Mode or has no electrical power. Also, PCM has lots of error codes. No 1st or 4th, shift 2nd to 3rd by itself when put in D or OD and locks converter: Goes into gear but sluggish like brakes are on, can manually shift to 2nd to get moving, then put in OD and truck shift 3rd as well as 4th are OK.

When did GMC start using the same instrument cluster?

Exactly the same instrument cluster is used in Chevy and GMC truck from 2003 to 2006. As these vehicles age, various amenities and features drop by the wayside and we can get used to many of those defects. But if the gear selector indicator is out or dim (as shown) you don’t know what gear you’ve selected.

How to do throttle body re-Learn Chevy Malibu?

1) Start the engine and let it idle in park for 3 minutes. During that period the idle may be higher idle than normal. 2) After 3 minutes, turn the engine off and leave it off for 60- seconds. 3) Start the engine again and let it idle in park for 3 minutes one more time. During these run periods you may see a check engine light.

How does the throttle plate work on a GM car?

A motor and gear reduction set inside the throttle body opens and closes the throttle plate to accomplish your request. Over time, carbon buildup can accumulate around the throttle plate, changing it’s “home” position.

How long does it take for GM throttle body to relearn?

If you don’t do a relearn procedure, the PCM will “hunt” for a new baseline idle. It will eventually learn it on its own, but it may take over a week of driving, during which time you will experience high and low idle speeds and possibly rough idle. 1) Start the engine and let it idle in park for 3 minutes.

Are there any problems with the GM throttle position sensor?

GM Throttle Position Sensor Problems 1 Function and Location. Throttle position sensors (TPS) are usually located on the large butterfly valve that controls airflow into and out of an engine, called the throttle-body. 2 Inconsistent Idle. 3 Engine Stalling. 4 Erratic Shifting. 5 Maladjusted TPS.

Why is my TPS sensor on my GM car not working?

If GM TPS sensors have any inherent flaws, it is a tendency to slip out of adjustment. Though this can happen to any car, many GM owners have reported such a failure.

1) Start the engine and let it idle in park for 3 minutes. During that period the idle may be higher idle than normal. 2) After 3 minutes, turn the engine off and leave it off for 60- seconds. 3) Start the engine again and let it idle in park for 3 minutes one more time. During these run periods you may see a check engine light.

A motor and gear reduction set inside the throttle body opens and closes the throttle plate to accomplish your request. Over time, carbon buildup can accumulate around the throttle plate, changing it’s “home” position.

What is the Chevy check engine light code?

Answer: Hi Onnie. Your code is a P0332 Knock Sensor 2 Circuit Low Input (Bank 2). With a code like a P0332 you’re likely to find the problem lies with the knock sensor on bank 2 (that’s the side of the engine that doesn’t have cylinder #1), or with the associated wiring & connections.

Is it safe to clear a misfire code on a Chevy truck?

Yes, your truck does need attention. When the truck ran out of gas it likely set a misfire code, and possibly other codes. It should be safe to just clear the trouble codes. If any engine light codes return, the truck will need further attention. Good luck!

What to do if your check engine light is not working?

Start by inspecting the wiring and connectors, repair as required. If everything is fine, check the sensor using a DVOM (digital volt ohm meter). Replace if necessary. You can find the proper resistance values using a repair manual or comparing the sensor reading on bank 2 to that of bank 1. Good luck with your knock sensor issue!

When to call a tow truck for a check engine light?

When you see the check engine light it doesn’t necessarily mean you need to pull the car over to the side of the road and call a tow truck. It does mean you should get the car checked out as soon as possible. If you ignore the warning, you could end up causing further damage.

What’s the Check Engine light on my Silverado?

Hello all I have a 2009 Silverado 1500 LT 5.3 with 93K and she’s been acting up the last couple of weeks. The check engine light came on throwing code p0305 which is a misfire in cylinder 5.

What causes a GMC Sierra to run rough?

EGR- The EGR system recycles burnt exhaust gasses back into the combustion chamber. Crank/Cam Sensor- When the cam or crank sensors are not being read by the ECM/PCM, it’s impossible to get the ignition timing right. If you Sierra does start at all, it’ll run rough.

What to do if your GMC wont start?

You may also want to check the fuse (see “Fuses and Circuit Breakers” in the Index). See your dealer for service. Center. See “Roadside Assistance” in the Index. 1.) Attempt to start the car by turning the key to the Start/Run Position. 2.) Observer that the vehicle fails to start and that the security light is illuminated. 3.)

Why does my GMC Sierra suddenly stop running?

Truck suddenly stops running, acting like it’s out of fuel. There is fuel in the gas tank and, I can hear the fuel pump when I turn the ignition on. Is there a fuse, or relay that is maybe causing this to happen?

How to start a car with a flashing security light?

Attempt to start the car by turning the key to the Start/Run Position. 2.) Observer that the vehicle fails to start and that the security light is illuminated. 3.) Release key to the ‘ON/Accessory’ Position. (DO NOT turn key to the ‘OFF’ position).

Why does the ABS light stay on in my car?

ABS light stays on in car. How ABS (Anti-Lock Brakes) work and what to do if they have problems and aren’t working, DIY with Scotty Kilmer. Anti-lock brakes (ABS) location, inspection and diagnosis. DIY Car repair with Scotty Kilmer, an auto mechanic for the last 50 years. 1. Autel Diagnostic Tool: http://amzn.to/2jPe6nE 2.

What does ABS light on, Trac off mean?

Repair Topics > Brakes > ABS light on, TRAC off,… ABS light on, TRAC off, Stabilitrac off – What does it mean?

Are there dash lights on a Chevy Blazer?

No Dash/Instruments cluster lights. GMC Jimmy, Chevy Blazer, Silverado, Sierra. – YouTube If playback doesn’t begin shortly, try restarting your device.

Why do the dome lights not come on when the door is opened?

Dome lights don’t come on when door is opened. Dome light dash push button switch (to the right of headlight switch) is in the extended position. Dome lights will turn on manually if the push button switch (a.k.a. dash light dimmer) is twisted to extreme clockwise position, but in that mode they simply remain on even when door is closed.

What are the different colors of GMC warning lights?

They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are 50 of them, so search carefully! Models examined include Acadia, Savana, Sierra, Terrain, and Yukon.

No Dash/Instruments cluster lights. GMC Jimmy, Chevy Blazer, Silverado, Sierra. – YouTube If playback doesn’t begin shortly, try restarting your device.

When did the wiring diagrams for GM trucks come out?

These GM wiring diagrams provide schematics for vehicle model years 1988 through 1998. Access our free Wiring Diagrams Repair Guide for GM Full-Size Trucks 1988-1998 through AutoZone Rewards. These diagrams include: Fig. 2: Sample Diagram: How to Read and Interpret Wiring Diagrams

Where are the fuses located on a GMC Sierra?

License Lamp, Parking Lamps, Taillamps, Roof Marker Lamps, Tailgate Lamps, Front Sidemarkers, Fog Lamp Relay, Door Switch Illumination, Fender Lamps, Headlamp Switch Illumination The underhood fuse/relay center is located in the rear of the engine compartment near the brake fluid reservoir.

What kind of parts do I need for a 1998 GMC?

Easy to use parts catalog. 1998 GMC Parts | RockAuto ALL THE PARTS YOUR CAR WILL EVER NEED Show Prices In US Dollars ($)Australian Dollars (AU$)Brazilian Real (R$)Canadian Dollars (CAD$)Swiss Francs (CHF)Euros (€)British Pounds (£)Japanese Yen (¥)Mexican Pesos (Mex$)Norwegian Krone (kr)New Zealand Dollars (NZ$) EnglishEspañolDeutschFrançais

What was the name of the 1998 GMC Suburban?

K2500 SUBURBAN the USACanada K3500 the USACanada K3500 PICKUP the USA P3500 the USACanada SAFARI the USACanada SAVANA 1500

What are GM Genuine Parts and ACDelco original equipment?

GM Genuine Parts and ACDelco Original Equipment are the true GM OE parts installed during the production of your GMC. These maintenance, repair, powertrain, and collision components are designed, engineered, and tested to rigorous standards and are backed by General Motors.

What kind of Dash covers do LMC trucks use?

The …1987-91 F100 F150 F250 Bronco Dash Covers The …1973-79 F100 F150 F250 1978-79 Bronco Dash Covers The …1992-96 F100 F150 F250 Bronco LED Instrument Panel Bulbs … Gives You Longer Bulb Life Dash Protector Prevents Fading and Cracking Shelf-It™ … The Ultimate in Organized Convenience Dash Protector …

Do you need a PCM for a GM car?

Depending on the year, model and engine of your GM vehicle, your starting system may be less complicated or use only some of the components shown here. For example, earlier anti-theft systems didn’t communicate the same way with the PCM. The bottom line is you MUST get the wiring diagram for your particular vehicle.

Where is the recirc door control on a GMC CK?

The Recirc door control is found at the center-left of the schematic. It is enabled by Switched +12V when the Blower is on at any speed setting. If the Blower is off, the Recirc door defaults to the fresh air position. The Recirc door actuator is closed when a ground is applied at Pin 4 of the Climate Control PCB.

Where is the climate control PCB located on a GMC CK?

It is separately powered on Pin 1 from the dash light dimmer, and has no function in climate control, other than illumination. The climate control PCB is powered when the ignition switch is in the RUN position via Circuit #141. +12V comes in on Pin 5 in the upper left corner of the schematic.

When was the GMC C / K HVAC unit last used?

This Heater AC Control Unit was used on the 1996-98 line of Chevrolet and GMC C/K Pickups, and on 1996-99 GM Suburbans, Tahoes, and Yukons. It was no longer used after 1999, due partly to unreliability, and partly due to upgrades to newer technology.

The …1987-91 F100 F150 F250 Bronco Dash Covers The …1973-79 F100 F150 F250 1978-79 Bronco Dash Covers The …1992-96 F100 F150 F250 Bronco LED Instrument Panel Bulbs … Gives You Longer Bulb Life Dash Protector Prevents Fading and Cracking Shelf-It™ … The Ultimate in Organized Convenience Dash Protector

Why is the gas gauge showing empty at a red light?

So I was sitting at a red light this afternoon with my foot on the brake. All the sudden, the Low Fuel light comes on and the gas gauge is showing empty. I know this is wrong because I just filled up two days ago and have hardly gone anywhere.

Often gauges and warning lights work together to indicate a problem with the vehicle. When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do.

Why does the low fuel light come on when the tank is full?

All the sudden, the Low Fuel light comes on and the gas gauge is showing empty. I know this is wrong because I just filled up two days ago and have hardly gone anywhere.

So I was sitting at a red light this afternoon with my foot on the brake. All the sudden, the Low Fuel light comes on and the gas gauge is showing empty. I know this is wrong because I just filled up two days ago and have hardly gone anywhere.

All the sudden, the Low Fuel light comes on and the gas gauge is showing empty. I know this is wrong because I just filled up two days ago and have hardly gone anywhere.

What are the features of Denali 2.0 lights?

Our HiDrive™ LEDs, Tri-Optic™ Lens system, and DataDim™ Technology are just a few of the unique features you will only find in DENALI 2.0 lights. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

How can I Reset my GM car alarm?

After deactivating it, you can reset the alarm to ensure that your GM vehicle security system is set correctly. Use your GM keyless remote to unlock the doors by pressing the “Unlock” button.

What kind of warning lights are on a GMC Yukon?

They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are over 40 of them, so search carefully! Models examined include Acadia, Savana, Sierra, Terrain, and Yukon.

After deactivating it, you can reset the alarm to ensure that your GM vehicle security system is set correctly. Use your GM keyless remote to unlock the doors by pressing the “Unlock” button.

What kind of dashboard cover does a GMC Yukon have?

Dashboard Cover Chevrolet and GMC (Polyester, Black) – 61718-00-25 . Only 6 left in stock (more on the way). . Only 12 left in stock – order soon. . Temporarily out of stock.

Author Image
Ruth Doyle