Easy tips

What are the torque specs for a Chevy big block?

Table of Contents

What are the torque specs for a Chevy big block?

Bolt Torque Spec Chart for Chevy Big Block Chevy Fastener Type Torque Specs Main cap bolt, 396-427 2-bolt 95 ft.-lbs. Main cap bolt, 396-454 4-bolt (inner/outer) 110 ft.-lbs. 3/8 in. connecting rod bolt 50 ft.-lbs. 7/16 in. connecting rod bolt 67-73 ft.-lbs. Cylinder head bolts, long 75 ft.-lbs. Cylinder head bolts, short 65-68 ft.-lbs.

What kind of intake manifold does a 350 Chevy use?

Edelbrock Performer EPS Intake Manifold – 350-2701: It is tuned for a tuned for peak torque at 3500 RPM for a 350 Chevy engine. It is meant to drive the engine from idle to 5500 RPM.

Which is the best trick flow cylinder head?

Ideal for 302- 406 c.i.d. engines, these heads feature high-velocity, small cross-section intake runners to promote low-rpm torque and high-rpm horsepower. Fast As Cast® runners deliver near-CNC-ported flow and performance for about the same price as regular cast heads.

What’s the peak torque of a 350 Chevy?

It is tuned for peak torque at 3500 RPM, hence offers excellent driveability from idle to 5500 RPM. E-Street Cylinder Heads: These are meant to provide maximum flow velocity by working with Edelbrock intake manifold, carburetor, camshaft, etc.

What are the torque specifications for a Chevy Corvette?

24.4 C4 – REAR Bushing Clamp Bolts Type: Bolt 65.08 C4 – Ball Joint to LOWER Control Arm Nut Type: 43.39 Type: 67.79 C4 – LOWER Ball Joint NOTE: 50 + Cotter Pin Align Type: 44.74 C4 – UPPER Ball Joint NOTE: 33 + Cotter Pin Align Type: 20.34 C4 – Master Cylinder Mounting Nuts Type: 32.54 Type: 32.54 Type: 21.69 C4 – REAR (Guide Pins) – LOWER Type:

How much torque does a Duramax wheel hub have?

Chassis Torque Specs Wheel Hub Assembly to Knuckle Bolts 133 lb ft Lower Ball Joint Nut 74 lb ft Upper Ball Joint Nut 37 lb ft Tie Rod End 46 lb ft Brake Caliper Bolts 80 lb ft Brake Caliper Bracket Bolts (to knuckle) 221 lb ft Lug Nuts 140 lb ft ABS Sensor Mounting Bolt 13 lb ft 18 N m Axle Nut 177 lb ft 240 N m Brake Hose Clip 106 lb in 12 N m

Where can I find the latest torque specs?

Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.

What is the head bolt torque sequence for a small block Chevy?

Small Block Chevrolet Head Bolt Torque Sequence Another EZ Read reference. This is the Head Bolt Torque Sequence (Pattern) for the Small Blocks, Mouse Motors or what ever you might lovingly call this motor. I have not had a lot of vehicles with Small Block Chevy’s other then my engine swap 372″ Motor I put into my International Scout.

24.4 C4 – REAR Bushing Clamp Bolts Type: Bolt 65.08 C4 – Ball Joint to LOWER Control Arm Nut Type: 43.39 Type: 67.79 C4 – LOWER Ball Joint NOTE: 50 + Cotter Pin Align Type: 44.74 C4 – UPPER Ball Joint NOTE: 33 + Cotter Pin Align Type: 20.34 C4 – Master Cylinder Mounting Nuts Type: 32.54 Type: 32.54 Type: 21.69 C4 – REAR (Guide Pins) – LOWER Type:

How much torque does a Vortec head have?

Type: Bolt Crankshaft Position Sensor To Engine Block 5.92 71 8.02 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Cylinder Head To Engine Block 46 552 62.37 Vortec – Head Bolts – LONG – 2 Steps: 46FtLbs; +90deg Type: Bolt 43 516 58.3 Vortec – Head Bolts – SHORT – 2 Steps: 43FtLbs; +90deg

What are the torque specifications for a torkspec engine?

94.91 Vortec – Main Bearing Cap Bolts Type: Bolt 9 108 12.2 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt 7.33 88 9.94 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Crankshaft Position Sensor To Engine Block 5.92 71 8.02 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Cylinder Head To Engine Block 46 552 62.37

What are the torque specifications for a GM 5.3L V8?

480 Pontiac – Clutch Fork Ball Stud Type: Stud 25 300 Type: Bolt Head: Hexagon 20 240 Type: Bolt Head: Hexagon 20 240 Pontiac – Rocker Arm Nuts (Non-Adjustable) Type: Stud 55 660 Type: 25 300 Type: 15 180 Type: 15 180 Type: Bolt Head: Hexagon Timing Chain/Belt Cover To Engine Block 15 180

Type: 15 180 Type: 15 180 Type: Bolt Head: Hexagon Timing Chain/Belt Cover To Engine Block 15 180 Type: Timing Chain/Belt Cover To Intake Manifold

94.91 Vortec – Main Bearing Cap Bolts Type: Bolt 9 108 12.2 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt 7.33 88 9.94 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Crankshaft Position Sensor To Engine Block 5.92 71 8.02 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Cylinder Head To Engine Block 46 552 62.37

What are the torque specifications for a Vortec engine?

44.74 Vortec – Engine Mount Bracket to Frame Bolts Type: Bolt 32 384 43.39 Vortec – Connecting Rod Cap Nuts Type: 38 456 51.52 Vortec – Connecting Rod Cap Nuts Type: 46 552 62.37 Vortec – Torque Converter Cover Bolts Type: Bolt

Which is the torque converter cover bolt type?

Type: 46 552 62.37 Vortec – Torque Converter Cover Bolts Type: Bolt 70 840 94.91 Vortec – Main Bearing Cap Bolts Type: Bolt 9 108 12.2 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt 7.33 88 9.94 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Crankshaft Position Sensor To Engine Block

What is the torque setting on a 4.3L engine?

Both steps require a torque setting of 35 foot-pounds. The bolt numbering for the initial torque is 8, 1, 9, 10, 11 and 12 on the passenger side and 2, 3, 4, 5, 6 and 7 on the driver side. The final torque should go around the manifold counterclockwise starting at the driver’s side front of the manifold.

How much torque does a Vortec transmission have?

89.48 Vortec – Engine Block to Automatic Transmission Bolts Type: Bolt Head: Hexagon Engine Block To Transmission 35 420 47.45 Vortec – Engine Block to Automatic Transmission Bolts Type: Bolt Head: Hexagon 35 420 47.45 Vortec – NV 1500/3500 Transmission Bolts Type: Bolt Head: Hexagon 39 468 52.88 Vortec – Engine Mount to Engine Block Bolts

What are the torque specifications for a Cavalier?

Find out how to access AutoZone’s Torque Specifications Repair Guide for Cavalier, Sunfire 2001-2005.

What kind of torque does a 5.0L 305ci have?

Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420 47.45 Type: Engine Temp Sensor To Intake Manifold 20 240 27.12

What kind of torque does a Chevy Blazer have?

Search Car Torque Specifications by Engine or Model Torque Spec Database Click on One of the Links Below Model Torque Specifications Engine Torque Specifications for Chevrolet Blazer GM 4.3L-262ci-V6

What kind of torque does a Chevy small block have?

900 101.69 Chevy Small Block – 7/16 in. Bolt – Rod Cap Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420 47.45

Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420 47.45 Type: Engine Temp Sensor To Intake Manifold 20 240 27.12

How much torque does a Chevrolet S-10 have?

4.3L-262ci-V6 Torque Specifications for Chevrolet S-10 Anti Roll/Stabilizer Bar To Axle Assembly 44 Ft-Lbs 528 In-Lbs 59.66 N-m

Bolt Torque Spec Chart for Chevy Big Block Chevy Fastener Type Torque Specs Main cap bolt, 396-427 2-bolt 95 ft.-lbs. Main cap bolt, 396-454 4-bolt (inner/outer) 110 ft.-lbs. 3/8 in. connecting rod bolt 50 ft.-lbs. 7/16 in. connecting rod bolt 67-73 ft.-lbs. Cylinder head bolts, long 75 ft.-lbs. Cylinder head bolts, short 65-68 ft.-lbs.

What are torque specs for front hub replacement?

Hey Guys, does anyone have the Torque Specs needed for the front Hub/Bearing Replacement ie. Hub to Knuckle Bolts, Caliper Bracket to Knuckle Bolts and Drive Axel to Hub Bearing Nut ( i think the last is 151 ft/lbs).

Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.

Do you need torque specs for Chevy Equinox?

High School Diploma 9,667 satisfied customers Have a 2011 equinox with a 2.4 engine and need the torque Have a 2011 equinox with a 2.4 engine and need the torque spec for connecting rod bolts please…  read more Ron Z. – Chevy Tech – Vocational, Technical or Trade Scho

What are the torque specs for a Cruze?

I need to know the torque specs for a 1.4 L cruze head bolts …  read more Ron Z. – Chevy Tech – Vocational, Technical or Trade Scho 23,891 satisfied customers I need rod bolt and main bolt torque specs and sequence for I need rod bolt and main bolt torque specs and sequence for 2013 equinox 2.4 .can’t seem to find them.

How do you sequence a Chevy Equinox 2.4?

State Inspector and Chevy Diagnostics Verified There is no sequence for the camshaft cap bolts. Install the camshaft bearing caps. Hand tighten the cap bolts. Tighten the bearing cap bolts in increments of 3 turns until they are seated. Tighten the bolts to 10 Nm (89 lb in).

High School Diploma 9,667 satisfied customers Have a 2011 equinox with a 2.4 engine and need the torque Have a 2011 equinox with a 2.4 engine and need the torque spec for connecting rod bolts please…  read more Ron Z. – Chevy Tech – Vocational, Technical or Trade Scho

I need to know the torque specs for a 1.4 L cruze head bolts …  read more Ron Z. – Chevy Tech – Vocational, Technical or Trade Scho 23,891 satisfied customers I need rod bolt and main bolt torque specs and sequence for I need rod bolt and main bolt torque specs and sequence for 2013 equinox 2.4 .can’t seem to find them.

How to tighten head bolts and torque spec?

I attached the sequence and the torque spec for installing the head. Make sure you use only new bolts. These are TTY or torque to yield bolts. helpful? I need to know the sequence of tightening the head bolts and the torque spec for them. helpful? Here is the left and right side sequence. Tighten the cylinder head bolts.

What’s the torque on a Chevy S10 2.2?

**Third picture is for the tightening sequence of Cylinder head bolts on 1996+Newer models. What is the torque value on the tensioner bolt on a 98 s10 2.2?

What are the specs for head bolts on YouTube?

– YouTube Head bolt torque specs and pattern. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What are the torque specs for a Chevy Blazer?

2019 Chevrolet Lug Nut Torque Specs – Table (All Models) YEAR / MAKE MODEL TIGHTENING TORQUE Volt L4-1.5L Elect 140  Nm  / 105 ft-lbs 2019 CHEVY (TRUCKS) Blazer AWD 190  Nm / 140  ft-lbs Blazer FWD L4-2.5L 190  Nm / 140  ft-lbs Blazer FWD V6-3.6L 190  Nm / 140  ft-lbs

What should the torque settings be on a 2019 Chevy?

If you are planning on installing a wheel on your 2019 Chevrolet, it is important to be aware of the manufacturer’s recommended torque settings. Using the proper torque on your Chevrolet’s wheels, helps ensure that the wheel assembly is securely installed.

What should lug nut torque be on 2019 Chevy?

Using the manufacturer’s recommended lug nut torque on your 2019 Chevrolet also helps guarantee that there isn’t either too much or too little pressure on any of the assemblies to which the wheel attaches. Before you install your wheels, check your vehicle’s recommended torque.

How much torque does a Silverado Sierra have?

4L60-E Transmission Torque Specs Accumulator Cover to Case Bolt 6-10 lb ft Case Extension to Case Bolt 31-35 lb ft Case Extension to Case Bolt (4WD Shipping) 8.3-16.7 lb ft Converter Cover Bolt 89 lb in Converter Housing to Case Screw 48-55 lb ft Cooler Pipe Connector 26-30 lb ft Detent Spring to Valve Body Bolt 15-20 lb ft

What are the torque specs for a Chevy Sparky?

Before you install your wheels, check your vehicle’s recommended torque. This chart contains Chevrolet Wheel Lug Nut Torque specs for Chevrolet vehicles up to 2018. For 2019 and 2020 Chevrolet wheel bolt torque specs updates, please scroll to the last two rows at the bottom of the table below .

What should the torque settings be on a Chevrolet wheel?

If you are planning on installing a wheel on your Chevrolet vehicle, it is important to be aware of the manufacturer’s recommended torque settings.

What are torque specs for GMC 1500 4WD?

Anyone have a link or any numbers for ALL Torque specs for 03-06 Chevy 1500 4wd. I’m looking for everything suspension wise basically. LCA’s, UCA’s, etc etc.

4L60-E Transmission Torque Specs Accumulator Cover to Case Bolt 6-10 lb ft Case Extension to Case Bolt 31-35 lb ft Case Extension to Case Bolt (4WD Shipping) 8.3-16.7 lb ft Converter Cover Bolt 89 lb in Converter Housing to Case Screw 48-55 lb ft Cooler Pipe Connector 26-30 lb ft Detent Spring to Valve Body Bolt 15-20 lb ft

Before you install your wheels, check your vehicle’s recommended torque. This chart contains Chevrolet Wheel Lug Nut Torque specs for Chevrolet vehicles up to 2018. For 2019 and 2020 Chevrolet wheel bolt torque specs updates, please scroll to the last two rows at the bottom of the table below .

What are the torque specs for SBC engines?

Intake manifold bolts and head studs/bolts have to be torqued in a certain pattern and to a certain torque spec in order for your engine to work properly. Intake manifold bolts on SBC engines should be torqued to 30 lb-ft in a two-step sequence.

What should intake manifold bolts be torqued to?

Intake manifold bolts on SBC engines should be torqued to 30 lb-ft in a two-step sequence. First time around, set your torque wrench to 20, follow the pattern, then repeat the pattern (image above) again after setting the wrench to 30. The image above shows the torque pattern to be used when reinstalling the heads on any SBC engine.

What kind of suspension does a Chevy truck have?

Chevy / GMC Truck Rear Suspension Torque Specifications C – K Models Spring To Axle U-Bolt Nuts Leaf Spring -Front Bushing Bolt -Rear Shackle Bolt 110 110 Shock Absorber -Upper Attachment -Lower Attachment 150 110 Propeller Shaft (Driveshaft) To Rear Axle (Strap) To Rear Axle (U-Bolt)

Chassis Torque Specs Wheel Hub Assembly to Knuckle Bolts 133 lb ft Lower Ball Joint Nut 74 lb ft Upper Ball Joint Nut 37 lb ft Tie Rod End 46 lb ft Brake Caliper Bolts 80 lb ft Brake Caliper Bracket Bolts (to knuckle) 221 lb ft Lug Nuts 140 lb ft ABS Sensor Mounting Bolt 13 lb ft 18 N m Axle Nut 177 lb ft 240 N m Brake Hose Clip 106 lb in 12 N m

What is the torque of a screw fastener?

METRIC FASTENERS Nominal Size or Basic Screw Dia. Threads per inch Tensile Stress Area (sq. in.) ASTM A574 Clamp Load (lbs) Tightening Torque K = 0.15 K = 0.17 K = 0.20 Coarse Thread Series

What is the torque of a M8 bolt?

1) M8 are in inch-pounds; diameters M10 and larger are in foot-lbs. The torque values can only be achieved if nut or tapped hole has a proof load greater than or equal to the bolt’s minimum tensile strength.

What should the inner tie rod torque be?

You will need to jack the car up first. Tighten the nut to 30 N.m (22 lb ft) plus 120 degrees . Visually inspect to ensure that 2 1/2 to 4 1/2 threads are visible past the nylon washer. Tighten the inner tie rod to 100 N.m (74 lb ft). Please let us know what happens so it will help others.

What is the torque of a 104.4 Vortec bolt?

104.4 Vortec – Main Bearing Cap Bolts Type: Bolt 15 180 20.34 Vortec – Main Bearing Cap Bolts – 2 Steps: 15 FtLbs; +75degs Type: Bolt Crankshaft Position Sensor To Engine Block 8 96 10.85 Type: Bolt Crankshaft Position Sensor To Engine Block 15 180 20.34 Type: Bolt Cylinder Head To Cylinder Head 65 780 88.13 Type: Bolt

4.3L-262ci-V6 Torque Specifications for Chevrolet S-10 Anti Roll/Stabilizer Bar To Axle Assembly 44 Ft-Lbs 528 In-Lbs 59.66 N-m

You will need to jack the car up first. Tighten the nut to 30 N.m (22 lb ft) plus 120 degrees . Visually inspect to ensure that 2 1/2 to 4 1/2 threads are visible past the nylon washer. Tighten the inner tie rod to 100 N.m (74 lb ft). Please let us know what happens so it will help others.

104.4 Vortec – Main Bearing Cap Bolts Type: Bolt 15 180 20.34 Vortec – Main Bearing Cap Bolts – 2 Steps: 15 FtLbs; +75degs Type: Bolt Crankshaft Position Sensor To Engine Block 8 96 10.85 Type: Bolt Crankshaft Position Sensor To Engine Block 15 180 20.34 Type: Bolt Cylinder Head To Cylinder Head 65 780 88.13 Type: Bolt

How much torque does a Pontiac torkspec have?

54.23 Type: Bolt 55 660 74.57 Type: Bolt 43 516 58.3 Pontiac – Connecting Rod Nut Type: Bolt 100 1200 135.58 Pontiac – Main Bearing Caps – EXCEPT Rear Main Type: Bolt 120 1440 162.7 Type: Bolt 100 1200 135.58 Type: Bolt 95 1140 128.8 Pontiac – EXCEPT 4 End Bolts Type: Bolt 22 264 29.83 Type: Bolt Exhaust Manifold To Cylinder Head 40 480 54.23

How to install a torsion spring in a Chevy?

Make sure you have a lever or large screwdriver, pliers, and a pair of vice grips. Step 2: Undo the cables from the top of trunk – small white plastic retainer you pull forwards and the retainer practically falls out. Step 3: position the rod – but do NOT put into the LEFT side slots. Get the rod up and around the hinge on right.

How much torque do you put on a General Motors car?

Tighten to 8 ft-lbs (10 N-m), then tighten an additional 1/3 turn to at least 37 ft-lbs (50 N-M). Upon initial installation of replacement ball joint, tighten nut to to 81 ft-lbs (110 N-m). 2. Tighten to 8 ft-lbs (10 N-m), then tighten an additional 1/3 turn to at least 48 ft-lbs (65 N-m). 3.

What are the torque specifications for a GM 4.3L V6?

81 972 109.82 Vortec – Main Bearing Cap Bolts Type: Bolt 77 924 104.4 Vortec – Main Bearing Cap Bolts Type: Bolt 15 180 20.34 Vortec – Main Bearing Cap Bolts – 2 Steps: 15 FtLbs; +75degs Type: Bolt Crankshaft Position Sensor To Engine Block 8 96 10.85 Type: Bolt Crankshaft Position Sensor To Engine Block 15 180 20.34 Type: Bolt

How fast do Yella Terra roller rockers go?

Premium quality Yella Terra extruded alumiunum roller rockers have never let a competitor down at our high speed proving grounds (Calder Park Thunderdome), where Holden and Ford Auscars required to run our roller rockers having battled in racing at an average speed of over 200km for an estimated 100,000 laps.

What makes a car have a higher torque?

Moly and other lubes offer reduced friction and increased bolt tension, which will affect the torque figure. If you use aftermarket performance bolts like ARP’s, you should follow the recommended torque specifications. Was this answer helpful?

Which is the strongest roller rocker in the world?

Yella Terra Roller Rockers are arguably the strongest aluminum rocker arms in the world. Deflection and bend test prove their aircraft grade extruded aluminum arms are superior to rival aluminum and stainless steel arms. They are simply the ultimate rocker arms for use in high revving street engines and many race applications.

Moly and other lubes offer reduced friction and increased bolt tension, which will affect the torque figure. If you use aftermarket performance bolts like ARP’s, you should follow the recommended torque specifications. Was this answer helpful?

How big is a 90 Chevy small block?

Type: Oil Filter Adapter To Engine Block 90 Chevy Small Block – 1/4in. Bolt Type: Oil Filter Adapter To Engine Block 162 Chevy Small Block – 5/16in. Bolt Type: 20 240 Chevy Small Block – Oil Gallery Plugs – 1/4in. Type: 90 Chevy Small Block – 14 bolts – 1/4in. Type: 162 Chevy Small Block – 4 Bolts – 5/16in.

Do you have to torque your rod bolts?

Torqueing your rod bolts without pre-determining the required torque to achieve the correct rod bolt stretch is not recommended. However if this is the only tightening method available to you, DO NOT EXCEED THE TORQUE AMOUNT INDICATED FOR YOUR BOLTS. NOTE: Your Crowerods are totally rebuildable.

How to determine the torque of a connecting rod?

STEP 1: Your Crower connecting rods came with a connecting rod specification tag. Check the tag to find the rod bolt part number used to fasten your connecting rods. Rod bolt length listed here is the measurement from under the head to the end. STEP 2: Use the chart below to determine the recommended lubricant, rod bolt stretch and torque amounts.

What are the torque specifications for a GM 2.8l-171ci?

25.76 Fan/Pulley to Water Pump Bolts Type: Bolt Flexplate/Driveplate To Crankshaft 50 600 67.79 Type: Bolt 50 600 67.79 Type: Bolt 16 192 21.69 Mechanical Fuel Pump Mounting Bolts Type: Bolt Intake Manifold To Cylinder Head 23 276 31.18 Type: Bolt 7.5 90 10.17 Type: Bolt Dim: M 6 X 1.00 18 216 Type: Bolt Dim: M 8 X 1.25 33 396

What kind of torque does a 1987 Chevy 454 have?

Torque Specifications In the 1987 Chevy 454, the bolts joining the crankshaft to the engine block require 95 ft.-lbs. of torque. The cylinder head bolts require 80 ft.-lbs. of torque to join to the engine block, and the oil pan bolts to the engine block with 25 ft.-lbs. of torque.

Do you need torque specs for an 85 S10 Chevy?

Need torque specs for a 85 s10 chevy with a 2.5 engine? Rebuilding engine and need torque specs for the head, rods and mains. Clicking this will make more experts see the question and we will remind you when it gets answered.

How big is the exhaust manifold on a 1987 Chevy 454?

The exhaust manifold bolts to the cylinder head with 20 ft.-lbs. of torque and the intake manifold to the cylinder head with 30 ft.-lbs. The oil-pump-cover-to-oil-pump bolts screw to 6.67 ft.-lbs., while the spark plugs join to the cylinder head with 15 ft.-lbs. of torque.

How big is the spark plug on a 1987 Chevy 454?

The oil-pump-cover-to-oil-pump bolts screw to 6.67 ft.-lbs., while the spark plugs join to the cylinder head with 15 ft.-lbs. of torque. To prevent leaks, the oil pan drain plug should receive 20 ft.-lbs. of torque.

Find out how to access AutoZone’s Torque Specifications Repair Guide for Cavalier, Sunfire 2001-2005.

What are the torque specifications for a magnum?

Find out how to access AutoZone’s Torque Specifications Repair Guide for 300, 300C & Magnum 2006-2008, Charger 2006-2008. Find out how to access AutoZone’s Torque Specifications Repair Guide for Cherokee, Grand Cherokee, 1999-2005. Find out how to access AutoZone’s Torque Specifications Repair Guide for Canyon, Colorado 2006-2007.

What are the torque specifications for a Chevy Camaro?

10.85 Gen IV – REAR Caliper Bleeder Valve Type: 43.39 Gen I/II – Front Flex Hose to Caliper Type: 40.67 Gen IV – FRONT Brake Hose to Caliper Banjo Bolt Type: Bolt 29.83 Gen IV – REAR Brake Hose to Caliper Banjo Bolt Type: Bolt 12.5 16.95 Type: 12.5 16.95 Type: Brake Master Cylinder To Power Brake Booster 32.54 Type: 32.54 Type: 13.56

What was the wheelbase of a Chevy C65?

Series 65 (Chevy C65) had wheelbases from 125 to 218 inches. Standard specification included V8 power, 4-speed or 5-speed transmission, 7,000-lb. front axle and 17,000-lb rear (except ME65 with 30,000-lb. tandem rear axles).

What was the wheelbase of a Chevy C60?

Series 60 (Chevy C60) had wheelbases from 125 to 218 inches. Engine availability: Six of V8. Standard: 5,000-lb. front axle, 15,000-lb. rear axle with hydraulic brakes, 7000-lb. front, 17,000-lb rear with air.

What was the weight of a Chevy C70?

Series 70 (Chevy C70) was available from the end of 70s with GVW to 33,400 lbs for single rear axle model, and up to 50,000 lbs for tandem.

What are torque specs for small block Chevy?

These specs are for stock-type bolts with light engine oil applied to the threads and the underside of the bolt head. Moly and other lubes offer reduced friction and increased bolt tension, which will affect the torque figure. If you use aftermarket performance bolts like ARP’s, you should follow the recommended torque specifications.

What are the torque specifications for a General Motors truck?

TORQUE SPECIFICATIONS GENERAL MOTORS APPLICATION FT-LBS / ( N-m) AXLE SHAFT FLANGE BOLT ‘S’ BODY CAR 27 (37) TRUCKS 60 (82) AXLE SPINDLE NUT ‘A’ BODY 192 (261) ‘C’ ‘E’ ‘H’ & ‘K’ BODIES 180 (245) ‘J’ & ‘L’ BODIES 191 (260) ‘P’ BODY 200 (271) ‘S’ BODY CAR 137 (186) ‘T’ SERIES TRUCK

What are the suspension specifications for a Chevy truck?

Model C-10 CP-20-30 K – All G-10-20 G-30 Lower Control Arm Shaft U-bolt 85 85 65 85 Upper Control Arm Shaft Nuts 70 105 70 105 Control Arm Rubber Bushings 115 115 Upper Control Arm Bushing Steel §§ New 190 Used 115 New 190 Used 115 Lower Control Arm Bushing Steel §§ New 280 Used 115 New 280 Used 115 Upper Ball Joint Nut * 50 ** 90 **100 *50 **90

What are the torque specifications for a GM 5.7L V8?

24.4 Gen II – STEP 3: SIDE (MUST BE NEW) 10 Bolts Type: Bolt 18 216 24.4 Gen II – Crankshaft Position Sensor Bolts Type: Bolt 22 264 29.83 Gen II – STEP 1: 11mm (1-8) – 22FtLbs; +90deg; +90deg Type: Bolt Cylinder Head To Engine Block 22

What kind of engine is 5.7L in weight?

Engine Engine Mechanical – 5.7L 6-1 Engine Mechanical – 5 Engine Engine Mechanical – 5.7L 6-1 2001 Marine/Industrial Engine Mechanical – 5.7L Specifications Fastener Tightening Specifications

How big is a 5.0L 305ci V8 engine?

Type: 75 900 101.69 Chevy Small Block – 7/16 in. Bolt – Rod Cap Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420

480 Pontiac – Clutch Fork Ball Stud Type: Stud 25 300 Type: Bolt Head: Hexagon 20 240 Type: Bolt Head: Hexagon 20 240 Pontiac – Rocker Arm Nuts (Non-Adjustable) Type: Stud 55 660 Type: 25 300 Type: 15 180 Type: 15 180 Type: Bolt Head: Hexagon Timing Chain/Belt Cover To Engine Block 15 180

What kind of engine is a 5.7L small block?

The 5.7L LS1 introduced the third generation of General Motors’ Small Block V8 engines. Other than a similar displacement, external dimensions and rod bearings, the LS1 shared little with the Gen II LT1 engine it replaced.

What kind of engine does a GM 5.7 liter have?

GM 5.7 Liter V8 Small Block LS1 Engine Type: 5.7L V8 Gen III Small Block Engine Orientation; Longitudinal Engine Mass (kg/lbs): 177 / 390 Displacement: 5,665cc (5.7L; 346ci) Compression ratio: 10.1.:1

What are the torque specs for a Hyundai Tiburon?

size M10 bolts – 18 foot pounds of torque PLUS turn 60 degrees PLUS turn 60 degrees again. size M12 bolts – 22 foot pounds of torque PLUS turn 60 degrees PLUS turn 60 degrees again. Please note, your Deposit doesn’t constitute a payment.

How much torque does a liter of water have?

Torque Specifications Make Liter CID Engine Model Year Rod Torque Main Torque Cylinder Head Bolt Torque

What are the torque specs for a Chevy 350 engine?

Low-End Torque Specs. Main-cap torque specification on the typical Chevrolet 350 two-bolt-main engine is 70 ft.-lbs. Specifications for the four-bolt-main are 70 ft.-lbs for the inner bolts, 65 ft.-lbs for the 7/16-inch outer bolts, and 40 ft. lbs. for the 3/8-inch outer bolts.

Type: Oil Filter Adapter To Engine Block 90 Chevy Small Block – 1/4in. Bolt Type: Oil Filter Adapter To Engine Block 162 Chevy Small Block – 5/16in. Bolt Type: 20 240 Chevy Small Block – Oil Gallery Plugs – 1/4in. Type: 90 Chevy Small Block – 14 bolts – 1/4in. Type: 162 Chevy Small Block – 4 Bolts – 5/16in.

When did the small block chevy engine start?

The small block Chevy engine is the most common V8 engine out there to add performance upgrades to. Production for the typical small block started in 1957 and is still being used today.

Low-End Torque Specs. Main-cap torque specification on the typical Chevrolet 350 two-bolt-main engine is 70 ft.-lbs. Specifications for the four-bolt-main are 70 ft.-lbs for the inner bolts, 65 ft.-lbs for the 7/16-inch outer bolts, and 40 ft. lbs. for the 3/8-inch outer bolts.

How much torque does a small block Chevy have?

Small Block Chevy Torque Specs Fastener Type Torque Spec 7/16 in. Outer Main Cap Bolt 65 ft.-lbs. 7/16 in. Inner Main Cap Bolt 70 ft.-lbs. 3/8 in. Outer Main Cap Bolt 40 ft.-lbs. 11/32 in. Connecting Rod Bolt 38-44 ft.-lbs.

The small block Chevy engine is the most common V8 engine out there to add performance upgrades to. Production for the typical small block started in 1957 and is still being used today.

How big is a 101.69 Chevy small block?

101.69 Chevy Small Block – 7/16 in. Bolt – Rod Cap Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420 47.45 Type:

How big is the thread on a flywheel bolt?

NOTE 1: All flexplate bolts listed below are Pro Series 200,000 psi rated bolts unless noted otherwise. NOTE 2: The thread size of metric fasteners is listed using international designations. For example, “M10” indicates a 10mm thread size. Didn’t find the kit you were looking for?

What are the torque specs for a Stovebolt 235?

Thanks for the help. This is for a 1953, 1954 235 with solid lifters. Remember to oil all bolts before setting torque. Torque wrench calibrated lately? See “235/261 Main Cap” Thread for more info. Go to the International Inliners page for head torque sequence.

What are the specifications of a Dodge 235?

235 specifications. General. Bore 3 9/16″. Stroke 3 15/16″. Compression ratio 8.25:1. Horsepower 135 @ 4000 rpm. Compression (cranking) 130 psi (min.) Torque, Lbs.

How much horsepower does a 235 Inliner have?

See “235/261 Main Cap” Thread for more info. Go to the International Inliners page for head torque sequence. You will find it in the Tech Tips section. http://www.inliners.org/ Horsepower 135 @ 4000 rpm. .016″ exh. See the USA in your vintage Chevrolet!

Thanks for the help. This is for a 1953, 1954 235 with solid lifters. Remember to oil all bolts before setting torque. Torque wrench calibrated lately? See “235/261 Main Cap” Thread for more info. Go to the International Inliners page for head torque sequence.

235 specifications. General. Bore 3 9/16″. Stroke 3 15/16″. Compression ratio 8.25:1. Horsepower 135 @ 4000 rpm. Compression (cranking) 130 psi (min.) Torque, Lbs.

What’s the maximum weight for a Chevy truck?

Not to exceed 90 ft. lbs. maximum. ** Plus additional torque to align cotter pin. Not to exceed 130 ft. lbs. maximum. *** Plus additional torque to align cotter pin. ¡ P300 (32), P300 (42) and JF-9 – 100 ft. lbs. ¡¡ P300 (32) – 215 ft. lbs., P300 (42) and JF-9 – 130 ft. lbs. ¡¡¡ (K10 – 20) 205 ft. lbs., (K30) 65 ft. lbs.

What kind of engine does a Chevelle have?

Performance Specs Engine Size Carb. HP Torque I-6 250ci 1x1bbl 145hp 230 lb-ft C8 307ci 1x2bbl 130hp 230 lb-ft V8 350ci 1x4bbl 175hp 280 lb-ft V8 350ci 1x2bbl 165hp 280 lb-ft

When did the Chevy Chevelle heavy come out?

The Heavy Chevy that was released late 1971, was basically the economy version of the SS. It could be had with any of the V8s, except the 454, which was exclusive to the SS. The SS Package showed little change from the previous year.

Where can I get a Chevelle torque manual?

They are only around 20-25 a piece. Borrow them free at the library. I have thought about the manuals. If someone has one with the numbers that I need that would be great. Not available at library and I can not wait 4-6 more weeks to get the car back together. Click to expand…

What are torque specifications for GM 7.4L 454ci V8?

Crankshaft To Engine Block 128.8 Cylinder Head To Engine Block Distributor Clamp To Engine Block Drain Plug To Oil Pan Engine Temp Sensor To Engine Block Exhaust Manifold To Cylinder Head Flywheel To Crankshaft Intake Manifold To Cylinder Head Oil Pan To Engine Block Oil Pan To Engine Block

When did Chevy add a torque converter to the transmission?

Beginning in 2007, the 4L70E transmissions upgraded the input shaft with an integrated input shaft speed sensor. If the converter and input shaft are not compatible, there will be fitment issues that will prevent you from using the torque converter in the transmission.

What are the parts of a torque converter?

A torque converter is designed to transfer the torque produced by the engine, and convert that into usable power to be applied to the ground through the transmission, rear-end gears, and ultimately the tires. There are four main parts to a converter – the turbine, the pump, the stator, and the front cover.

Why are torque converters all about the stall?

Torque Converters are all about the stall…you want your torque converter to stall at the RPM where your engine has its peak torque output, giving you the hardest launch possible. Torque converters are all about the stall.

How big is the bolt on a Ford 4.9L?

88.13 Type: Bolt 80 960 108.47 Cylinder Head Bolts – 3 Step: 55FtLbs; 65FtLbs; 80FtLbs Type: Bolt 22 264 29.83 Type: Bolt

Crankshaft To Engine Block 128.8 Cylinder Head To Engine Block Distributor Clamp To Engine Block Drain Plug To Oil Pan Engine Temp Sensor To Engine Block Exhaust Manifold To Cylinder Head Flywheel To Crankshaft Intake Manifold To Cylinder Head Oil Pan To Engine Block Oil Pan To Engine Block

How much torque does a 300ci pushrod have?

Type: 2 24 2.71 Pushrod Cover Plate to Engine Block Type: 65 780 88.13 Type: Bolt 80 960 108.47 Cylinder Head Bolts – 3 Step: 55FtLbs; 65FtLbs; 80FtLbs Type: Bolt 22 264 29.83 Type: Bolt EGR Valve To Intake Manifold 18 216 24.4 Type: Bolt 38 456 51.52 Type: 82 984 111.18 Engine Mount to Chassis/Frame Bracket Type: 82 984 111.18

What are the torque specifications for a Firebird?

Gen IV – REAR Caliper Bleeder Valve Type: 43.39 Gen I/II – Front Flex Hose to Caliper Type: 40.67 Gen IV – FRONT Brake Hose to Caliper Banjo Bolt Type: Bolt 29.83 Gen IV – REAR Brake Hose to Caliper Banjo Bolt Type: Bolt 12.5 16.95 Type: 12.5 16.95 Type: Brake Master Cylinder To Power Brake Booster 32.54 Type: 32.54 Type: 13.56

88.13 Type: Bolt 80 960 108.47 Cylinder Head Bolts – 3 Step: 55FtLbs; 65FtLbs; 80FtLbs Type: Bolt 22 264 29.83 Type: Bolt

What kind of torque does a Jeep CJ have?

CJ-5/6/7 – Rod End (Connecting Rod) to Steering Knuckle Type: 50 600 CJ-5/6/7 – Rod Ends (Tie Rod) to Steering Knuckle Type: 12 144 Type: Bolt Transfer Case Assembly To Transmission 30 360 CJ-5/6/7 – Transfer Case to Transmission Bolts Type: Bolt

What are the torque specs for a Ford engine?

As for the torque specifications, the 289 (above top) and 302 intakes are both torqued in two stages to between 20 and22 lb-ft. The 351 intake, on the other hand is torqued in three stages to between 23 and 25 lb-ft. Ford Head Bolt Torque Sentences and Specs The torque sequence for all three Ford engines can be seen in the photo above.

How many bolts do you need for a Chevy starter?

It attaches with 3 bolts. Two ⅜”-16 x 1″ long bolts go through the two un-threaded holes in the starter nose and screw into the bellhousing. One ⅜”-16 x 1-¾” long bolt goes through an un-threaded hole in the bellhousing and screws into the threaded hole in the starter nose.

What kind of starter does a 1955 Chevy have?

One ⅜”-16 x 1-¾” long bolt goes through an un-threaded hole in the bellhousing and screws into the threaded hole in the starter nose. Early 1955 – 56 versions of this style starter nose had all three bolts going through un-threaded holes in the starter nose and screwing into the bellhousing. Cast Iron, 2 Bolts to Engine Block:

What kind of starter does a Chevy 10mt have?

The “high torque” version of the 10MT motor has a spacer bushing and a long screw to connecting the solenoid to the metal strap leading inside the motor. An example of this type of starter is shown on the right in the above photo. Note:Some rebuilt starters may have the shorter “low torque” field coils inside a “high torque” field frame (housing).

How does a high torque Chevy starter work?

The high torque starter utilizes a different case. As it pertains to the connection of the solenoid to the actual starter motor, although all solenoids are the same length, there was a copper spacer and longer screw used to make the connection in high-torque units.

It attaches with 3 bolts. Two &frac38″-16 x 1″ long bolts go through the two un-threaded holes in the starter nose and screw into the bellhousing. One &frac38″-16 x 1-¾” long bolt goes through an un-threaded hole in the bellhousing and screws into the threaded hole in the starter nose.

One &frac38″-16 x 1-¾” long bolt goes through an un-threaded hole in the bellhousing and screws into the threaded hole in the starter nose. Early 1955 – 56 versions of this style starter nose had all three bolts going through un-threaded holes in the starter nose and screwing into the bellhousing. Cast Iron, 2 Bolts to Engine Block:

Are there any torque to yield head bolts?

For example, Honda has used the “torque plus angle” method of tightening head bolts for many years, but I do not think that any of their head bolts require replacing so they are not “torque to yield” bolts.

What do you need to know about torque specs?

It is important to note that most engine torque specs require 30w engine oil to get the correct stretch on the bolt. Some specialty fasteners require a specific lubricant. It is important to know which lube, if any, the bolt requires and to use it when tightening it.

How to determine the torque of a bolt?

The wrong way, asserts Archer, is to pick a number off a standard engineering table or to rely solely on the classic equation, T = KDP, in which T is the target tightening torque; K is the coefficient of friction, or nut factor; D is the nominal diameter of the bolt; and P is the desired tensile load on the bolt.

How big of a torque wrench do I Need?

To get a torque specs we will need the proper bolt size not the wrench size. If you have 5/8 fine thread bolts holding that head down its something I have never come across in my years in the trade and you would be looking at 150 ft. lbs. or better.

What should the torque be on a torque table?

Torque specifications are shown either as an exact figure, or a specific range. Follow any special instructions or multi-step directions carefully to assure correct final torque. There may be different specifications for different size bolts, bolts in different positions, tightening bolts in several stages, or a cold engine vs. a warm engine.

What are the torque specs for a Mustang?

Below are torque specs for 5.0L, 4.6L, 3.8L, and 2.3L Mustangs. These specifications are meant as a general guide, and MuscularMustangs.com will not be held responsible for any errors or typos. Please be aware of the differences between ft/lb and in/lb settings.

What are the torque specifications for an engine?

Torque specifications are for stock factory type bolts with light engine oil applied to the threads and the underside of the bolt head. Other lubrications offer reduced friction and increased bolt tension, and will affect the torque figure.

What is the grade of torque lock nut clamp?

The prevailing torque lock nut clamp loads are listed at 75% of the proof loads specified for the appropriate grade bolt: Grade C – SAE J429 Grade 8, FNL Grade 9 – FNL Grade 9 bolt, Grade F – SAE J429 Grade 5, Grade G – SAE J429 Grade 8.

What are the torque specs for a Chevy c1500?

Good job. (step 1 ) the torque specs for the heads are—1998 through 2001 are 37 foot lbs. ( step 2) rotate an additional 90-degrees (1/4 turn). intake manifold bolts ( lower ) step 1– 62 in-lbs, step 2–115 in-lbs. intake manifold bolts/studs ( upper ) 18 ft-lbs. this is for the 3.1 v-6, have a good day! Remove the lower intake manifold.

How much torque does a water pump have?

TORQUE SPECIFICATIONS (7.4L) Rocker Arm 4.3L With Press-In Studs Rocker Stud 35 (47) Rocker Nut 18 (25) 4.3L With Screw-In Studs Rocker Stud 35 (47) Rocker Nut 19 (26) 5.0L & 5.7L(2) Thermostat Housing Bolt 21 (28) Valve Lifter Retainer Bolt 4.3L 12 (16) 5.0L & 5.7L 18 (25) Water Pump Bolt 33 (45) INCH Lbs. (N.m)

Do you need torque specs for intake manifold?

I need the torque specs on this guy, I been looking around and can’t seem to find the specs for a 5.3, I doing this tomorrow “Saturday” and I need the specs so I now I have the correct seal for the new intake gaskets so it don’t leak on me like it is now. Thanks in advance. Randy. 44 in lbs first pass and 88 second pass.

24.4 Gen II – STEP 3: SIDE (MUST BE NEW) 10 Bolts Type: Bolt 18 216 24.4 Gen II – Crankshaft Position Sensor Bolts Type: Bolt 22 264 29.83 Gen II – STEP 1: 11mm (1-8) – 22FtLbs; +90deg; +90deg Type: Bolt Cylinder Head To Engine Block 22

What do I need for intake gaskets on a small block Chevy?

You will need the usual things for the installation, including the intake gaskets, end seals if you desire to use them, possibly thermostat housing gasket and any other small parts along the way. The Small Block Chevy manifolds from the early 280, 302, 307,

How much torque does a small block intake have?

Small Block Chevy Intake Manifold Bolt Torque Specifications. 25 Ft/Lbs. Make sure you follow the sequence in a couple of steps, worry about this more on old and aluminum manifolds. Cast Iron is much more forgiving if you are unfortunate to have to use a boat anchor of an intake.

When to tighten intake manifold bolts on 98 Chevy 350 vortex?

At what torque must the Intake Manifold Bolts be tightened to on a 98 Chevy 350 Vortex Two years post replacement the manifold seems to be leaking again?

What’s the torque on a Vortec intake manifold?

Hey guys, so I know the stock intake manifold is torqued to 11ft/lbs….HOWEVER, I’m running Max’s TBIâ„¢ for vortec heads manifold modifed for the whole vortec setup and true MPFI, and I’m putting on some RHS heads. I found this from the RHS site: it states the intake manifold torque is 35ft/lbs.

How to replace the intake manifold on a GM 3.1L?

3) Remove hose clamps from the two ends of the bypass hose and separate them from the metal tubing. These pieces of tubing are pressed into the intake manifold. An 8mm bolt threads into a housing by the water pump. 4) Remove the coolant overflow bottle.

How big is the Vortec intake manifold bolt?

41 492 55.59 Vortec – Intake Manifold Bolts – VIN Z – LOWER REAR ONLY Type: Bolt 11 132 14.91 Vortec – Intake Manifold – 3 Steps: 2 FtLbs; 9 FtLbs; 11 FtL

Good job. (step 1 ) the torque specs for the heads are—1998 through 2001 are 37 foot lbs. ( step 2) rotate an additional 90-degrees (1/4 turn). intake manifold bolts ( lower ) step 1– 62 in-lbs, step 2–115 in-lbs. intake manifold bolts/studs ( upper ) 18 ft-lbs. this is for the 3.1 v-6, have a good day! Remove the lower intake manifold.

Author Image
Ruth Doyle