What are the torque specifications for a torkspec engine?

94.91 Vortec – Main Bearing Cap Bolts Type: Bolt 9 108 12.2 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt 7.33 88 9.94 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Crankshaft Position Sensor To Engine Block 5.92 71 8.02 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Cylinder Head To Engine Block 46 552 62.37

What are the torque specifications for a Vortec engine?

44.74 Vortec – Engine Mount Bracket to Frame Bolts Type: Bolt 32 384 43.39 Vortec – Connecting Rod Cap Nuts Type: 38 456 51.52 Vortec – Connecting Rod Cap Nuts Type: 46 552 62.37 Vortec – Torque Converter Cover Bolts Type: Bolt

What are the torque specifications for a Borg T 5?

Vortec – Clutch Bell Housing to Transmission (Borg T-5) Type: Bolt 33 396 44.74 Vortec – Engine Mount Bracket to Frame Bolts Type: Bolt 32 384 43.39

Which is the torque converter cover bolt type?

Type: 46 552 62.37 Vortec – Torque Converter Cover Bolts Type: Bolt 70 840 94.91 Vortec – Main Bearing Cap Bolts Type: Bolt 9 108 12.2 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt 7.33 88 9.94 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Crankshaft Position Sensor To Engine Block

What are torque specs for front hub replacement?

Hey Guys, does anyone have the Torque Specs needed for the front Hub/Bearing Replacement ie. Hub to Knuckle Bolts, Caliper Bracket to Knuckle Bolts and Drive Axel to Hub Bearing Nut ( i think the last is 151 ft/lbs).

How much torque does a GMC Terrain have?

Hub to Knuckle Bolts, Caliper Bracket to Knuckle Bolts and Drive Axel to Hub Bearing Nut ( i think the last is 151 ft/lbs). I’m about to change the right front hub bearing on my 2013 AWD 2.4L Terrain which is roaring at only 54K (yeah, IK it’s a know issue).

What kind of torque does a 2010 Chevy Equinox have?

Need torque specs on a 2010 equinox 2.4l. Thats for the cams Vocational, Technical or Tra… Vocational, Technical or Tra… I have a 2010 Chevy Equinox FWD with a 2.4L engine. The vin I have a 2010 Chevy Equinox FWD with a 2.4L engine. The vin is 2CNALPEW2A6330096.

What do I need for my Chevy Equinox?

I need torque specs and sequence for a 2010 chevrolet equinox 2.4 Cylinderhead and camshaft bolts I need torque specs and sequence for a 2010 chevrolet equinox 2.4 Cylinderhead and camshaft bolts – Answered by a verified Chevy Mechanic We use cookies to give you the best possible experience on our website.

How do you sequence a Chevy Equinox 2.4?

State Inspector and Chevy Diagnostics Verified There is no sequence for the camshaft cap bolts. Install the camshaft bearing caps. Hand tighten the cap bolts. Tighten the bearing cap bolts in increments of 3 turns until they are seated. Tighten the bolts to 10 Nm (89 lb in).

What are the torque specs for a 2012 Chevy Eco Tech 2.4L?

I need to know what the connecting rod and cap torque specs are for a 2012 Chevy eco tech 2.4l vin k. Also if the torque specs on the head … read more

What are the torque specs for a Chevy big block?

Bolt Torque Spec Chart for Chevy Big Block Chevy Fastener Type Torque Specs Main cap bolt, 396-427 2-bolt 95 ft.-lbs. Main cap bolt, 396-454 4-bolt (inner/outer) 110 ft.-lbs. 3/8 in. connecting rod bolt 50 ft.-lbs. 7/16 in. connecting rod bolt 67-73 ft.-lbs. Cylinder head bolts, long 75 ft.-lbs. Cylinder head bolts, short 65-68 ft.-lbs.

What are the torque specifications of a Vortec bolt?

62.37 Vortec – Torque Converter Cover Bolts Type: Bolt 70 840 94.91 Vortec – Main Bearing Cap Bolts Type: Bolt 9 108 12.2 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt 7.33 88 9.94 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Crankshaft Position Sensor To Engine Block 5.92 71 8.02 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt

How much torque does a General Motors truck have?

GENERAL MOTORS APPLICATION FT-LBS / ( N-m) AXLE SHAFT FLANGE BOLT ‘S’ BODY CAR 27 (37) TRUCKS 60 (82)

What is the head bolt torque specs?

Torque specs: Torque specs: CYLINDER HEAD BOLT TORQUE SPECS (tightening) / (loosening) 8, 4, 2, 6, 10 7, 3, 1, 5, 9. Torque in steps: 22ft-lbs (264in-lbs), Then to 63ft-lbs (756in-lbs) (final spec) 94+ Teg

What are the torque specifications?

Torque is part of the basic specification of an engine: the power output of an engine is expressed as its torque multiplied by its rotational speed. Internal-combustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car).

What is head bolt torque spec?

Torque, as a specification for head bolts, refers to the amount of rotational force required to tighten the bolts properly . Torque is measured in foot-pounds. Manufacturers provide torque specifications to guide mechanics in properly tightening the bolts connecting the cylinder heads to the main engine.

What are the torque specs on the rocker arms?

The intake and exhaust rocker / Pushrods are labeled in the picture below. Exhaust pushrods are longer than intake. Intake valves are closer to the valley of the engine. Torque spec on rocker arms is: 14 NM (124 in.lbs.) plus 30 degrees Lower intake bolts: long bolts- 13 NM (115 in. lbs.) Short Bolts- 25 NM (18 FT. lbs.) Pushrod Positions

How much torque does a Vortec head have?

Type: Bolt Crankshaft Position Sensor To Engine Block 5.92 71 8.02 Vortec – Crankshaft Sensor Bolts (MFI) Type: Bolt Cylinder Head To Engine Block 46 552 62.37 Vortec – Head Bolts – LONG – 2 Steps: 46FtLbs; +90deg Type: Bolt 43 516 58.3 Vortec – Head Bolts – SHORT – 2 Steps: 43FtLbs; +90deg

What are the torque specs for a 2.2 general motor?

The bolt connecting the crankshaft to the engine block bolts at 70 ft. lb. of torque. On pre-1998 models, the bolt connecting the crankshaft position sensor to the engine block torques at 9 ft. lb. and in 1999, it bolts at 7.33 ft. lb. After 2000, the same bolt must be torqued to 5.92 ft. lb.

What kind of torque does a Toyota 2.2L 134ci S4 have?

82.7 5S-FE Driveplate Bolts (AUTOMATIC Transmission) Type: Bolt 72 864 97.62 5S-FE Flywheel Bolts (MANUAL Transmission) Type: Bolt 65 780 88.13 5S-FE Flywheel Bolts (MANUAL Transmission) Type: Bolt Intake Manifold To Cylinder Head 14 168 18.98 Type: Bolt 4 48 5.42 Type: Bolt 4.5 54 6.1 Type: Bolt 7 84 9.49 Type: 4 48 5.42

What kind of torque does a head bolt have?

The line featured two different engines: a 2.2 L S4 and a 4.3 L V6. Head bolt torque refers to the amount of rotational force that must be applied to the cylinder head bolts for a safe and secure connection either to the engine block or another cylinder head depending upon the engine.

Type: 15 180 Type: 15 180 Type: Bolt Head: Hexagon Timing Chain/Belt Cover To Engine Block 15 180 Type: Timing Chain/Belt Cover To Intake Manifold

What kind of gasket does a 1916 Chevrolet have?

1916-28 Master ‘490’ 4 cyl. complete engine gasket set; Best #RS500C. 1933 Master 207 6 cyl. complete engine set Best #RS501C-2. OILER WICKS: Set of 8 wicks.

What kind of valve adjustment screws did Chevrolet use?

1921-1928 Valve Adjustment Screws with Locking Nuts that use 7/16-20 threaded rocker arms. This set has 8 of each, otherwise they are made out of the same material as the 1929-33 set. p/n 124929…..

How much torque does a 40 480 GM V8 have?

40 480 54.23 Type: Bolt 55 660 74.57 Type: Bolt 43 516 58.3 Pontiac – Connecting Rod Nut Type: Bolt 100 1200 135.58 Pontiac – Main Bearing Caps – EXCEPT Rear Main Type: Bolt 120 1440 162.7 Type: Bolt 100 1200 135.58 Type: Bolt 95 1140 128.8 Pontiac – EXCEPT 4 End Bolts Type: Bolt 22 264 29.83 Type: Bolt Exhaust Manifold To Cylinder Head 40 480

9.72 Type: Heat Shield To Exhaust Manifold 6.67 80 9.04 Gen II – Exhaust Manifold Heat Sheild Bolt Type: Bolt Head: Hexagon Idle Air Control Valve To Throttle Body 2.33 28 3.16 Gen II – Idle Air Control Valve Screws

What is the unitized seal on a crankshaft?

The unitized seal requires the rear crankshaft seal replacer kit, Part Number 3164302, for the removal process. 1. Installer plate 2. Crankshaft seal guide 3.

How to tighten the capscrews on a crankshaft pulley?

Tighten the capscrews in a star pattern in two steps. Torque Value:Step1 7 N•m [ 60 in-lb ] Step2 20 N•m [ 180 in-lb ] Place a light film of oil or an tifreeze on the inside diameter of a new dust seal. Install the dust seal with the larger outside diameter facing toward the engine.

What are the torque specifications for a GM 5.7L V8?

24.4 Gen II – STEP 3: SIDE (MUST BE NEW) 10 Bolts Type: Bolt 18 216 24.4 Gen II – Crankshaft Position Sensor Bolts Type: Bolt 22 264 29.83 Gen II – STEP 1: 11mm (1-8) – 22FtLbs; +90deg; +90deg Type: Bolt Cylinder Head To Engine Block 22

How much torque does a Silverado Sierra have?

4L60-E Transmission Torque Specs Accumulator Cover to Case Bolt 6-10 lb ft Case Extension to Case Bolt 31-35 lb ft Case Extension to Case Bolt (4WD Shipping) 8.3-16.7 lb ft Converter Cover Bolt 89 lb in Converter Housing to Case Screw 48-55 lb ft Cooler Pipe Connector 26-30 lb ft Detent Spring to Valve Body Bolt 15-20 lb ft

What kind of timing chain does a torkspec use?

Type: Timing Chain/Belt Cover To Intake Manifold 12 144 Type: Bolt Head: Hexagon 12 144 Type: Bolt Timing Chain/Belt Sprocket To Camshaft 40 480 Type: Bolt

What are the torque specifications for a Pontiac?

Pontiac – EXCEPT 4 End Bolts Type: Bolt 22 264 29.83 Type: Bolt Exhaust Manifold To Cylinder Head 40 480 54.23 Type: Bolt 95 1140 128.8 Type: Bolt 12 144 Type: Bolt 30 360 Type: Bolt 15 180 Type: Bolt 40 480 Pontiac – Clutch Fork Ball Stud Type: Stud

How to calculate the torque of a flange bolt?

Flange Bolt Torque Sequence 1 PASS 1 Torque Sequence: Torque to a maximum of 30% of the final torque value in accordance with the torque sequence. Check that gasket is getting compressed uniformly. 2 PASS 2 Torque Sequence: Torque to a maximum of 60% of the final torque value. 3 PASS 3 Torque Sequence: Torque to the final torque value (100%).

Vortec – Clutch Bell Housing to Transmission (Borg T-5) Type: Bolt 33 396 44.74 Vortec – Engine Mount Bracket to Frame Bolts Type: Bolt 32 384 43.39

When do I need to de-rated my bolt torque?

Also, if the nut material is the limiting factor, the maximum clamping capability (and corresponding bolt torque) of the assembly needs to be de-rated accordingly.

How do you tighten a bolt?

Grasp the top of the bolt stem with the pliers again. Take hold of the nut with the wrench and apply slow, steady pressure to the nut. It should begin to slowly tighten. Tighten it very slowly, one-quarter turn at a time. Stop frequently to check the toilet and see if it is still loose.

What is the head bolt torque?

Head Bolt Torque Head bolt torque refers to the amount of rotational force that must be applied to the cylinder head bolts for a safe and secure connection either to the engine block or another cylinder head depending upon the engine. After the desired torque is reached, some bolts then require further rotation of a few degrees.

What are the torque specs for vehicles?

What Are the Torque Specs for Vehicles AMC Trucks GM Trucks. A lot of things go between the engine block and oil pan that help components to go round and round, up and down. 5-Liter, Inline Four-Cylider. The base engine offered in the 1999 Ford Ranger is a 2.5-liter, inline four-cylinder motor. 0-liter V6. 0-Liter V6.

Type: 15 180 Type: 15 180 Type: Bolt Head: Hexagon Timing Chain/Belt Cover To Engine Block 15 180 Type: Timing Chain/Belt Cover To Intake Manifold

How much torque does a big block Mopar have?

Mopar Bolt Torque Specifications – Big Block Bolts or Parts Torque to: Main Caps 85 ft-lbs. Connecting Rod Bolts (Plain) 45 ft-lbs. Connecting Rod Bolts (Heavy Duty) 55 ft-lbs. Crankshaft Rear Bearing Seal 30 ft-lbs.

What kind of torque does an engine have?

180 Type: Bolt Head: Hexagon Timing Chain/Belt Cover To Engine Block 15 180 Type: Timing Chain/Belt Cover To Intake Manifold 12 144

What is the torque sequence for the rocker assembly?

What is the torque/sequence for the rocker assembly on a ISM Cummins and for the injectors What is the torque/sequence for the rocker assembly on a ISM Cummins and for the injectors – Answered by a verified Technician We use cookies to give you the best possible experience on our website.

What are the torque specs on a big block?

Ford Big Block (FE Series) Torque Specs Fastener Type Torque Specs Rocker Arm Shaft Bolts 40-45 ft.-lbs. Intake Manifold Bolts 32-35 ft.-lbs. Oil Pump Bolt 12-15 ft.-lbs. Cam Bolts 40-45 ft.-lbs.

How big is the rocker lever on a Cummins?

The rocker lever side clearance must be adjusted before the capscrews are tightened to their final torque value. Rocker Lever Installation Side Clearance mm in 0.50

How big are the bearing caps on a Pontiac?

135.58 Pontiac – Main Bearing Caps – EXCEPT Rear Main Type: Bolt 120 1440 162.7 Type: Bolt 100 1200 135.58 Type: Bolt 95 1140 128.8 Pontiac – EXCEPT 4 End Bolts Type: Bolt 22 264

Where did the Ford Duratec 20 engine come from?

This engine was developed in partnership with Mazda (part of the MZR family) and Volvo (Flexifuel), but under Ford ownership, which explains why it was used in a variety of different vehicle applications from one brand to the next.

What are the torque specs for a motor rebuild?

1. Tighten the main bearing and connecting rod bearing bolts. Tighten the main bearing bolts in two stages. Stage 1: 25 Nm. Stage 2: 60 degrees. 2. Tighten the connecting rod bearing bolts in two stages. Stage 1: 35 Nm.

Which is better 2.0 liter Duratec or 1.8 liter?

The 2.0-liter Duratec engine looks preferable compared to the 1.8-liter engine. It consumes the same amount of fuel, but the engine itself is more powerful, quieter, has more torque. The engine has a timing chain (not belt). There are no hydraulic tappets/lifters in the engine.

What kind of engine does a Ford Duratec HE have?

Capacities are 1.8, 2 litre plus an American 2.3 litre version, which is available in this country too. The engine features an alloy block and head plus some clever technology straight from the race track. The crank sits up inside the block and is held in place and braced at the same time, with an aluminium girdle.

What kind of throttle Assembly does a Ford Duratec use?

We list the Weber Alpha and Omex throttle body kits as well as Cosworth and Titan throttle body assemblies which should cover most requirements for induction. The Duratec is currently a very popular choice in kit cars, where it completely transforms the car into a reliable road rocket with the best modern engine combination.

Is there a torque specifications repair guide for Commander?

Find out how to access AutoZone’s Torque Specifications Repair Guide for Commander 2006-2007. Find out how to access AutoZone’s Torque Specifications Repair Guide for 300, 300C & Magnum 2006-2008, Charger 2006-2008. Find out how to access AutoZone’s Torque Specifications Repair Guide for Cherokee, Grand Cherokee, 1999-2005.

What kind of torque does a 5.0L 305ci have?

Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420 47.45 Type: Engine Temp Sensor To Intake Manifold 20 240 27.12

What kind of torque does a Chevy small block have?

900 101.69 Chevy Small Block – 7/16 in. Bolt – Rod Cap Type: 75 900 101.69 Chevy Small Block – 25-50-75 Step – Not Outer Bolts Type: 65 780 88.13 Chevy Small Block – Outer Bolts on 4 Bolt Cap Type: 65 780 88.13 Chevy Small Block – 25-45-65 Helical Sequence Type: Distributor Clamp To Engine Block 20 240 27.12 Type: 20 240 27.12 Type: 35 420 47.45

What are the torque specs on a Reman 5.7?

5.7 Vortec Head & Intake Manifold Torque Specs ? Installed Vortec heads on a standard 1986 reman 5.7 motor with roller lifters. My manual only goes up to 1996.

What are the torque specifications for a torkspec engine?