What are the different positions of the ignition switch?

The ignition switch has four different positions. Notice: Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key. Use the correct key, make sure it is all the way in, and turn it only with your hand. If the key cannot be turned by hand, see your dealer.

What does the D position on the Ignition Do?

D (START): This position starts the engine. When the engine starts, release the key. The ignition switch will return to ON/RUN for normal driving. A warning tone sounds when the driver door is opened if the ignition is still in ACC/ACCESSORY and the key is in the ignition.

Can you use a tool to turn the ignition?

Notice: Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key. Use the correct key, make sure it is all the way in, and turn it only with your hand. If the key cannot be turned by hand, see your dealer. The key must be fully extended to start the vehicle.

Which is the only position from which the key can be removed?

This is the only position from which the key can be removed. This locks the steering wheel, ignition, and automatic transmission. Do not turn the engine off when the vehicle is moving. This will cause a loss of power assist in the brake and steering systems and disable the airbags.

Which is the final position on the ignition?

The final position is the one you’ll probably be most familiar with: START. This position will start the engine. To start, keep your foot on the brake pedal (or on the clutch if your vehicle has a manual transmission) and turn the key clockwise, away from you. When you hear the engine start, release your grip on the key.

What’s the second position on the ignition switch?

To turn the engine off, stop your vehicle and shift into park, then turn your key in the ignition switch to the LOCK/OFF position by turning counterclockwise, or closest to you. The second position is the ACC/ACCESSORY position, which allows you to use your radio, windshield wipers,…

What are the different ignition positions on a Chevy Silverado?

Your vehicle is equipped with four different ignition positions. To turn the engine off, stop your vehicle and shift into park, then turn your key in the ignition switch to the LOCK/OFF position by turning counterclockwise, or closest to you.

What happens if you leave the key in run position?

If the engine happened to stop while the points were closed, when you turned the key to the “run” position, the coil would be directly connected to the battery and if left that way for a few minutes, the coil would overheat and be ruined.