Is there a problem with the ignition on my GMC Sierra?

This problem occurs in minivans, cars and SUVs as well. There has been more reports of ignition Anti Theft defects and the security light flashing in more cars and trucks. This is one of the easy fixes for the common ignition starting problem, but GM needs to recall this issue and fix it for us.

How can I Fix my Chevy Silverado ignition?

Wedge a shim in the connection and secure the new connection with hot glue, silicon or any other glue that can be fairly easy to scrap off and remove if further maintenance is required. Replace the steering column cover and that’s how you fix the ignition in your GMC Sierra or Chevy Silverado 1500, 2500 and 3500. Loading…

What does the sensor do on a GMC Sierra?

A sensor tells the security system whether the key is in the ignition or not. This is a common feature in the GMC, Pontiac, Oldsmobile, Saturn, Chevrolet and other past and present GM brand vehicles. The wire, which is connected to that sensor, comes loose or corroded and needs to be secured or cleaned.

Is there an easy fix for a GMC ignition switch?

This is one way to fix a very complicated electrical system in the Chevrolet and GMC cars and trucks. Some are easy fixes with loose or bad electrical connections. Others involve the ignition switch itself, and others involve one of the computers that the system communicates with when starting the vehicle.

What was the ignition module on a 1993 GMC k1500?

1993 GMC K1500, K2500, K3500 Pick Up. All of the information you need to diagnose a no-start problem caused by the ignition module, or the ignition coil, or the distributor pickup coil. Wiring diagram. Component pin outs.

Can a GM ignition control module be used?

The ignition control module (ICM) and ignition coil tests in this article assume that your vehicle is Cranking but NOT STARTING due to a NO SPARK Condition. If you’re GM car or truck starts and runs, this article will not help you.

What was the ignition module for a 1996 GMC c2500?

1996 GMC C1500, C2500, C3500 Pick Up. 1996 GMC K1500, K2500, K3500 Pick Up. All of the information you need to diagnose a misfire or a no-start problem (caused by the ignition coil, the ignition module, or the crankshaft position sensor).

Can a hot surface cause a GM truck to catch on fire?

If the oil makes contact with a hot surface it can ignite and result in a vehicle fire. To date, GM is aware of three incidents and no injuries. The Fix: GM dealers will inspect the fitting and make the proper adjustments as needed. The first contact letters should be going out to truck owners by the week of April 28, 2014.

Why does my car not start at 9 / 10?

This is because 9/10 a no start condition will be because of a bad battery, bad connections, or user error in diagnosing those both. I have started many friends cars that wouldn’t crank, or crank strongly, simply because I saw the battery terminals were loose.

Where is the fuse block on a GMC Sierra?

GMC Sierra/Sierra Denali is also called VIA Vtrux Truck and Chevrolet Silverado LD. The engine compartment fuse block is in the engine compartment, on the driver side of the vehicle.

What to do if your GMC Sierra 1500 wont start?

If you discover white deposits or silvery-green deposits, but no further cracks or damage, you do not have to replace the battery, just clean it. To clean the battery on your GMC Sierra 1500, you have to remove the pole cables first, which requires no special knowledge, just a little concentration, as the order is very important.

Is there a problem with the security light?

Most complaints involve a blinking security light. This is one many problems to check before exploring security system bypass or other more involved solutions discussed in other videos. This ignition defect is causing engine starting problems in many GM manufactured vehicles such as Pontiac, Oldsmobile, Saturn, Hummer and Cadillac.

What’s the flashing security light on my GMC?

AllOffTopic.com FTW! It’s not security. Security issue would make it crank fine, fire up, and then stall immediately. I’d check the park interlock, that will prevent it from cranking in the first place. Check the park interlock as in it’s out of adjustment or what?

What should I do if my Toyota Corolla security light goes off?

The ten-minute procedure involves trying to start the engine. If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine.

Why does my Chevy Silverado not start by the key?

The engine went in and connected up fine, but it is not starting by the key. If i bypass the ignition it will turn over. There is also a light that is on from the dash that has a symbol of a lock. Many people are stating that this might be a computer problem.

Are there any GMC Sierras that do not work?

Some customers of 2003-2004 model year Cadillac Escalade, Escalade ESV, and Escalade EXT; Chevrolet Avalanche, Silverado, Suburban, and Tahoe; and GMC Sierra, Yukon, and Yukon XL vehicles have reported that one or more of the instrument panel (IP) cluster gauges stick, flutter, or become inoperative.

Can a GMC Sierra be repaired at no charge?

The repairs will be made at no charge to the customer. For verified failures between 70,001 miles (110,001 km) and 80,000 miles (130,000 km) on U.S. vehicles, dealers are to provide the customer with an instrument panel cluster (IPC) only.

Why is my air conditioning not working on my GMC Sierra?

While there are a variety of reasons your GMC Sierra 1500 air conditioning won’t work, the most common 3 are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.

What to do if your GMC Sierra gauge does not work?

DUE TO PART AVAILABILITY, THIS SPECIAL COVERAGE IS BEING ADMINISTERED IN PHASES. YOU WILL BE NOTIFIED AS EACH ADDITIONAL PHASE IS RELEASED. CUSTOMERS ARE BEING INSTRUCTED TO CONTACT THE DEALERSHIP TO ARRANGE AN APPOINTMENT IF THEY BELIEVE THEIR VEHICLE HAS THIS CONDITION.

Where did the 2000 GMC Sierra 1500 come from?

1st owner purchased on 03/31/00 and owned in TX until 06/30/04 • 2nd owner purchased on 08/17/04 and owned in TX until 10/17/07 • 3rd owner purchased on 10/17/07 and owned in CA until .

Why does my Chevy Silverado 1500 not start?

Hi! My question is in reference to my 99 Chevy Silverado 1500. It cranks, but won’t start. I checked the obvious (out of gas, etc.) and changed the fuel pump/filter. It still won’t start. Cranks and will 1/2 catch for a second, but then nothing.

When was the last serviced GMC Sierra 1500?

Last serviced at 131,144 miles in San Antonio, TX on 11/03/20 • Vehicle serviced • Emissions or safety inspection performed. No accident or damage reported to CARFAX.

Where is the trouble code on a GMC?

When retrieving GMC trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on.

Which is the diagnostic code for a GMC check engine light?

1 Refer to our Generic OBD II code list for definitions on all other GMC diagnostic trouble codes. 2 Manufacturer Specific Codes 3 P1031 4 P1032 5 P1105 6 P1106 7 P1107 8 P1108 9 P1109 10 P1111