Easy tips

Is there a fix for the Chrysler PT Cruiser?

Is there a fix for the Chrysler PT Cruiser?

With Chrysler no longer producing the PT Cruiser, it is likely that no official solution will be determined for this issue. The best solution is to take the car to a trusted mechanic to work on the car. The issue is a computer glitch, but to determine the cause of the glitch requires a professional evaluation.

Why does my PT Cruiser stall while driving?

This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving. It can happen sporadically while driving, giving the driver no warning as to when it will happen next. For some drivers, the issue occurs when a certain RPM is achieved. For others, the problem occurs at a certain speed.

When was the last time a PT Cruiser was made?

1.35 million PT Cruisers were built during its nine-year lifetime. With that many vehicles produced, there are bound to be some PT Cruiser problems. While the last PT Cruiser was produced in 2010, many of them are still on the road.

How much does it cost to repair a PT Cruiser dashboard?

Typical repair cost for a cracked dashboard is $200. The dashboard from the 2001 PT Cruiser will suddenly crack with no correlation to a causing event. It isn’t a result of being out in the sun. The cracks often start within 2-3 years of owning the car.

How much does it cost to fix a PT Cruiser engine stall?

The car this issue conflicts is the 2006 Chrysler PT Cruiser. Typical repair cost for an engine that stalls and shuts off while driving is $700. This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving.

Why does my car not pass the smog test?

In the OBD test, if any monitors are incomplete – because the car’s memory chip has not yet repopulated its essential information after the battery was disconnected – or failed, the vehicle will not pass the smog test.

What are the problems with a 2007 PT Cruiser?

Unfortunately, engine lights that will not turn off seem to be a prevalent PT Cruiser problem. The common symptoms for the 2007 PT Cruiser are overheating accompanied by the engine light turning on. The code P0340 is often displayed as the problem for owners.

The car this issue conflicts is the 2006 Chrysler PT Cruiser. Typical repair cost for an engine that stalls and shuts off while driving is $700. This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving.

What’s the best way to fix a PT Cruiser?

The best solution is to have a professional car mechanic well versed in PT Cruiser problems. A tempory solution was to turn the car off and back on. But this only stopped the problem temporarily and quite often the problem would arise again upon the next time the owner drove the car.

In the OBD test, if any monitors are incomplete – because the car’s memory chip has not yet repopulated its essential information after the battery was disconnected – or failed, the vehicle will not pass the smog test.

Why does my 2006 PT Cruiser overheat?

2006 pt cruiser 2.4 turbo ho put on fail proof thermostat a month or two . Don’t not overheat on 20 mile drive but does on a longer trip. Radiator is full just notice coolant tank may be leaking could that be the only problem or something else? Cooling fan is working also. Is this a good question?

Are there any problems with the Chrysler PT Cruiser?

Had all the same problems with overheating.Changed fan assembly,flushed out radiator etc.Ordered new after market radiator,installed runs better then new.Found out later they have a problem with small cores in radiator plugging up.Hope thi helps. 112 people found this helpful.

2006 pt cruiser 2.4 turbo ho put on fail proof thermostat a month or two . Don’t not overheat on 20 mile drive but does on a longer trip. Radiator is full just notice coolant tank may be leaking could that be the only problem or something else? Cooling fan is working also. Is this a good question?

What’s the problem with my Chilton PT Cruiser?

Middle dash bezel (panel) peeling was a problem on some 2001 models; a service bulletin exists and a dealer might replace it for free (they do not have to). Replacement looks easy in the Chilton’s manual: remove the climate control knobs, pull off the bezel (“middle section”).

How much does it cost to fix a PT Cruiser?

Even at the $60-$80 some dealers demand, though, the anti-theft keys are cheaper in the long run than not having them — and paying extra for your insurance every year (or having your car stolen more easily). Mike Curran told us to check for an ignition module malfunction — “about $30 and an easy fix.”

What causes a car to go into limp mode?

Problems which cause signals like this are usually faulty engine sensors/components/wiring, transmission issues, dysfunctional brakes and clutch, or even low fluid levels. The best way to fix limp mode is to take your car to a mechanic where a professional can inspect it.

How old was the 2002 Chrysler PT Cruiser?

The car definitely showed its age (it was 11 years old with about 120k miles on it when I got it), as the interior was pretty worn out and the bumpers were faded, but overall the car looked good for its age.

What causes engine light to come on on PT Cruiser?

11 people found this helpful. my 2007 pt did same thing, engine light came on , car was jerking and bucking, ( had nothing to do with the a/c or heat) it was the cam positon sensor, on line the part is 35.99 to 55.99 depending on where you buy it, local garage did mine part and labor for 162.00 29 people found this helpful.

When is the worst year for PT Cruiser problems?

In general, 2006 is the worst year for PT Cruiser problems. Here the engine light is constantly on and the engine idles rough. The engine light will repeatedly turn on after solutions to fix the problem are attempted.

This is the most dangerous of the PT Cruiser problems. It involves the engine to completely stall out while driving. It can happen sporadically while driving, giving the driver no warning as to when it will happen next. For some drivers, the issue occurs when a certain RPM is achieved. For others, the problem occurs at a certain speed.

Is the Chrysler PT Cruiser a good car?

Acceleration is anemic with its naturally aspirated engine, especially with the automatic, but a good deal better with turbocharged versions. A wide turning circle hinders maneuverability. The ride is somewhat stiff and the cabin a bit noisy, plus fuel economy was never that great.

Typical repair cost for a cracked dashboard is $200. The dashboard from the 2001 PT Cruiser will suddenly crack with no correlation to a causing event. It isn’t a result of being out in the sun. The cracks often start within 2-3 years of owning the car.

Why does my power door lock make a noise?

Unusual noises coming from inside the door are one of the first symptoms of a potential problem with a power door lock actuator. Most power door locks operate using gears or motors that may quietly whir, or make noise when they operate. Those noises are normal.

What are the symptoms of a bad door lock actuator?

Usually a bad or failing power door lock actuator will produce a few symptoms that can notify the driver of an issue that should be serviced. 1. Unusual noises coming from inside the door Unusual noises coming from inside the door are one of the first symptoms of a potential problem with a power door lock actuator.

Are there any problems with the Chrysler tipm?

But, the TIPM isn’t without its own faults. Customer complaints are endless when it comes to power management problems with the TIPM. From no-starts and intermittent problems to the common assessment by customers that, “My car is possessed,” these modules can be a real headache.

What does tipm stand for in Chrysler PT Cruiser?

The TIPM module controls a lot of your Chrysler PT Cruiser’s functionality. If it goes bad, it can render it inoperable, usually due to an issue with getting fuel. What is a TIPM? TIPM stands for Totally Integrated Power Module.

Can a bad tipm cause a PT Cruiser to turn over?

Here are the most common symptoms of a bad TIPM: The TIPM can keep the fuel pump from coming on. When this happens, your PT Cruiser will turn over, but it won’t start. The TIPM can leave your PT Cruiser’s fuel pump on, even after you remove the key from the ignition.

When did the Chrysler tipm fuse come out?

Take a look at the below chart which shows the most common TIPM designs issued by Chrysler between 2006 and 2015, the vehicle model years in which the vast majority of reported TIPM-related electrical problems have occurred to-date. In this table, we’ve also included the fuse and relay box for RAM Truck model years 2002 – 2005.

Is the Chrysler tipm on national back order?

On some of the models, the TIPM is on national back order, meaning, it’s more likely the sun will burn out before you get a replacement part. But, they’re working on it. Hopefully, a reasonable and affordable replacement is manufactured before these cars end up in the scrapyard. As a technician, the repair is simple.

What does the code p0340 mean on a PT Cruiser?

The common symptoms for the 2007 PT Cruiser are overheating accompanied by the engine light turning on. The code P0340 is often displayed as the problem for owners. This code means that the camshaft position sensor circuit sensor A bank 1 is malfunctioning. As we will see below this code makes sense since replacing the camshaft fixes the problem.

With Chrysler no longer producing the PT Cruiser, it is likely that no official solution will be determined for this issue. The best solution is to take the car to a trusted mechanic to work on the car. The issue is a computer glitch, but to determine the cause of the glitch requires a professional evaluation.

Why does the engine light come on on a PT Cruiser?

The following steps can be employed reset the light on a PT Cruiser. Also identified are some common problems that cause the engine light to come on. Check the gas cap on your PT Cruiser to ensure it is tightened properly. Shack the cap lid and listen for a rattle, if one is present, replace it.

Why is my PT Crusier engine shutting down?

Our PT Crusier has been dying while driving 55/60 mph. We thought fuel pump, but after letting the cruiser sit for 10 mins or more, it may start back up. This problem has been going on for about 2 mos or so. Battery is brand new and had fluids, oil, and a seal for transmission leak done in Feb. Of this year.

What causes a PT Cruiser tire to split?

The metal of the wheels deteriorates causing the chrome coating to peel off. Air from the tire will leak from the valve stem area. This can cause flat tires. It can also cause the tire to split when driving at a high rate of speed on a highway. There is no way to prevent the chrome from peeling.

Why did my 2003 PT Cruiser GT stop running?

Our 2003 PT Cruiser GT just turned over 100,000 km and just before that milestone the engine was running rough and had a harder time starting. I changed the spark plugs and the spark plug wires and now the engine runs like it was new. Passed the emmissions test with flying colours too.

Why does my 2002 PT Cruiser get hot?

Yo I’m having the same problem With my 2002 PT Cruiser. Only last time it almost over heat it actually was hot. The first time it did there was plenty of coolant in the reservoir and in the engine. It can’t be the water pump because I replaced it. I’m wondering if it is a bad thermostat or a fan causing my problems.. 33 people found this helpful.

Where can I get a compression test on my PT Cruiser?

Google-compression test, easy. Autozone will loan the tester.) both require you to get in there. You can pick up a used head at any salvage place (or have yours cleanedup) and order the head gasket on ebay (might as well do the valve cover/sparkplug tubes also). Good luck. 87 people found this helpful.

Are there power door locks on a 2005 Chrysler T & C?

Just bought a 2005 Chrysler t&c Friday and realized that night that the power door locks didn’t work. Should have done a more thorough inspection on the car. Went to the dealer today and they said I would have to bring it to their service station about 45 mins from my house. This discussion saved me a trip! 13 people found this helpful.

What causes a car to pull in the opposite direction?

If the car pulls in the opposite direction after you’ve done this, you’ve found tire trouble. Check your tires’ tread-wear patterns. For example, if a front tire’s tread tends to disappear along the outboard edge, it’s likely that the camber setting at that corner is too positive, and any pull probably will be toward that side.

https://www.youtube.com/watch?v=JnU3dvhIQIw

Middle dash bezel (panel) peeling was a problem on some 2001 models; a service bulletin exists and a dealer might replace it for free (they do not have to). Replacement looks easy in the Chilton’s manual: remove the climate control knobs, pull off the bezel (“middle section”).

Do you need both original keys for a PT Cruiser?

You will need both original keys if you or the locksmith programs new keys; the dealer may be able to make new keys from just one but you cannot.

You will need both original keys if you or the locksmith programs new keys; the dealer may be able to make new keys from just one but you cannot.

What causes a Chrysler PT Cruiser to come apart?

In damp or salt belt geographic areas, the bond comes apart from surface rust developing between the rubber and steel. The rear of the control arm then drops down and rests on the crossmember resulting in a ‘clatter’ over bumps. It is never a dangerous condition and would never come apart as it is a captive assembly.

Why does my Chrysler PT Cruiser not start?

Find the most common driver-reported problems that are to blame when a Chrysler PT Cruiser won’t start. If the engine does not crank (or cranks but won’t start), the wireless control module (wcm) may have locked up. this… The battery is considered dead when there isn’t enough charge to start the engine or run electrical components.

Why do PT Cruisers have bent valve stems?

To expand on guyiknow’s answer. PT Cruisers run semi interference engines. The path of the valves will not enter the path of the piston. It is possible for the exhaust valves and intake valves to contact at which point you end up with bent valve stems.

What should I do if my PT Cruiser belt breaks?

My 2005 pt cruiser belt broke they replaced it but could not start engine was told that possible valve damage ended up getting head reconditioned total cost $5600 : ( 12 people found this helpful.

1.35 million PT Cruisers were built during its nine-year lifetime. With that many vehicles produced, there are bound to be some PT Cruiser problems. While the last PT Cruiser was produced in 2010, many of them are still on the road.

Why does my Chrysler PT Cruiser shake when idling?

Here are the main components of the ignition system, as well as what would cause them to make your PT Cruiser shake when idling. Fouled plugs can cause a misfire, which in turn causes an idle shake. Spark Plugs – One of the absolute most common causes (if not the most common reason that your PT Cruiser may be shaking) is the spark plugs.

What to do if your PT Cruiser is stalling?

Before troubleshooting any automotive issue, including stalling issues with the PT Cruiser, make sure that you check the vehicles trouble codes with an OBD2 scanner. Trouble codes are always a great place to start diagnosing problems on today’s modern computer controlled vehicles. Without them, you are in the dark.

What makes a PT Cruiser run too lean?

Of all the sensors equipped in your vehicle, the O2 sensors may have it the hardest. They deal with super hot exhaust that can cover them in deposits that can leave them ineffective. The heat of the exhaust can also bake the wiring going to/from them over time. If an oxygen sensor goes bad, it can make your PT Cruiser run too lean (or rich).

PT Cruisers are stylish and popular wedge-shaped cars manufactured by Chrysler and inspired by the panel vans of the 1930’s. Some of the most common problems reported by PT Cruiser owners are PT Cruiser idle problems—rough or bogged down idling—when the PT Cruiser comes to a complete stop or when the air condition is running.

What to do if your PT Cruiser is idle?

If either of these error codes appears, then take your PT Cruiser to the dealer to have the idle speed control motor inspected. If no error codes related to the idle speed motor come up, replacing your spark plugs could resolve your idle issues.

Here are the main components of the ignition system, as well as what would cause them to make your PT Cruiser shake when idling. Fouled plugs can cause a misfire, which in turn causes an idle shake. Spark Plugs – One of the absolute most common causes (if not the most common reason that your PT Cruiser may be shaking) is the spark plugs.

Is the a / C on my PT Cruiser working?

I have a 04 PT Cruiser 2.4L Non Turbo. When waiting for a traffic light the A/C vents start blowing warm and the compressor cycles very fast. (driving along is fine, ice cold air) I noticed the electric fan was not working. At home in the driveway it works perfect.

What to do about wheel bearing noise in PT Cruiser?

The best way to diagnose wheel bearing noise is with the front wheels off the ground, chock the rear wheels, set the parking brake, keep the steering wheel straight, don’t walk in front of the vehicle and don’t get under the vehicle, have someone run it up to 55 mph and listen to the left and right sides.

How do you replace the bezel on a Chilton PT Cruiser?

Replacement looks easy in the Chilton’s manual: remove the climate control knobs, pull off the bezel (“middle section”). You can find replacement bezels in different styles from aftermarket suppliers – though they may be far pricier than junkyard or dealer parts.

How is the speed of a PT Cruiser controlled?

It is controlled by the sensor near the thermostat on the passenger side which has a slide mechanism as well as a clip like the radiator fan to secure it. High speed operation can be checked by disconnecting the sensor, while low speed can be checked while engine is idling without disconnecting it.

When did the Chrysler PT Cruiser Turbo come out?

On March 27, 2002, Chrysler introduced the PT Cruiser Turbo, referred to by most people as the GT Cruiser.

What kind of suspension does the Chrysler Turbo have?

The turbo models also include a specially tuned suspension and performance-tuned exhaust system with a large diameter chrome exhaust tip and a pronounced exhaust note. Performance four-wheel disc brakes, ABS, 17-inch painted five-spoke cast aluminum wheels and all-season P205/50HR17 tires round out Chrysler PT Turbo’s standard suspension equipment.

How big are the wheels on a Chrysler PT Cruiser?

The 2.4-liter turbocharged engine is coupled to a five-speed manual transaxle. The lowered suspension uses KONI struts and upgraded sway bars. The vehicle rolls on 17″ chrome wheels with 215/45 tires. We have lots of Chrysler PT Cruiser car information.

How big is the engine in the Chrysler GT cruiser?

The Chrysler GT Cruiser concept vehicle has a more muscular look which accents its 205 hp, 225 lb.-ft. turbocharged engine – an engine which can actually perform the way the PT Cruiser looks. The main engineering issues are the space and heat required by a turbocharger.

What kind of flames are on a 2002 Chrysler PT Cruiser?

For 2002, Chrysler is offering a set of tone-on-tone flame accents that are said to be “rippling” over the hood and front fenders of its retro-look wagon. Made of vinyl, the flames are applied after painting. Stylists have also been pondering the countless customized PT Cruisers that have been constructed, many of whic… Show full review

If your battery no longer has enough charge to turn the starter, your PT Cruiser will not start. As a battery ages, it’s “cranking amps” decrease, leaving it with a diminished capacity for starting the vehicle. When this happens, you’ll often hear the vehicle crank slowly, but not start.

How big is the trunk of a Chrysler PT Cruiser?

At best, it might hold one small suitcase and a couple of bags of groceries. The trunk does not hold anything with height to it. Items usually have to be laid flat in order to fit. The back passenger area does not provide much leg room.

What cause engine to run hot on a PT Cruiser?

  • Low Engine Coolant. The very first place that you would want to check if your PT Cruiser is running hot is going to be the engine coolant.
  • your PT Cruiser could have a clutch fan or an electric fan.
  • Radiator Issues.
  • Thermostat.
  • Water Pump.
  • Debris.

    Why does PT Cruiser go overheatt?

    The reason the PT Cruiser 2.4l has so many overheating issues is due to the air trapped in the water jackets. These cars are a pain in the rear, however this can be fixed simply by following the coolant bleed procedure.

    Why is PT Cruiser overheats?

    While there are a variety of reasons your Chrysler PT Cruiser is overheating, the most common 3 are a coolant leak (water pump, radiator, hose etc.), the radiator fan, or a failed thermostat. Coolant leak (water pump, radiator, hose etc.)

    Are PT Cruisers reliable?

    The Chrysler PT Cruiser Reliability Rating is 3.5 out of 5.0, which ranks it 30th out of 36 for compact cars. The average annual repair cost is $641 which means it has average ownership costs. The severity of repairs is average and the frequency of those issues is low, so major repairs are uncommon for the PT Cruiser. Compare With Another Vehicle

    Why does my Chrysler PT Cruiser window not go up?

    If your Chrysler PT Cruiser’s window won’t go up, it’s typically going to be the switch or the motor itself causing the problem. If there is anything that you would like to add, please leave a comment below. Good luck!

    How does a power window on a PT Cruiser work?

    They function very simply. There is a 12 volt signal at the switch. It sends that signal to the power window motor. If you put a voltmeter on it, there should be 12 volts in as long as the key is on, and ±12 volts out when you press the switch.

    Where was the Chrysler PT Cruiser originally made?

    The PT Cruiser was also assembled at the Eurostar Automobilwerk in Graz, Austria, for global markets (outside North America) in 2002, using the production code PG. European PT Cruisers built in 2001 or from 2003 onwards were built in Mexico under the PT production code. The US version came standard with a 2.4 L four-cylinder gasoline engine.

    What are the optional features of a Chrysler PT Cruiser?

    Optional features included leather seating surfaces, a power front driver’s bucket seat, an engine block heater, a power tilt-and-sliding sunroof, and heated dual front bucket seats.

    Is the PT Cruiser engine shut off while driving?

    CarComplaints.com Notes: The 2006 is the worst year for PT Cruiser engine complaints. Having an engine light on is annoying, but it’s the complaints about the engine shutting-off while driving that really have us concerned. TheTestDriver.Com – A website that gives free advice on anything automotive.

    Is the PT Cruiser engine covered under warranty?

    This problem may be covered under warranty. Ask your Chrysler dealer. CarComplaints.com Notes: The 2006 is the worst year for PT Cruiser engine complaints. Having an engine light on is annoying, but it’s the complaints about the engine shutting-off while driving that really have us concerned.

    Why does my Chrysler transmission stay in 1 gear?

    If you own a Chrysler vehicle and the transmission stays in 1 gear and will not shift, chances are the computer has put it into “limp in” mode. The underlying condition can be an internal fault, a defective solenoid pack,

    Why is my PT Cruiser not shifting gears?

    1. the trans has an internal pressure leak on the 2nd gear circuit, 2. there is a problem with the solenoid block or 3. A crappy computer or crappy computer inputs. Anyway, still give it a few miles for the computer to try and smooth it out ..k, then go from there 01 Pt , will not shift out of low gear and speedo doesn’t work.

    If you own a Chrysler vehicle and the transmission stays in 1 gear and will not shift, chances are the computer has put it into “limp in” mode. The underlying condition can be an internal fault, a defective solenoid pack,

    What kind of engine does a PT Cruiser have?

    The base engine for the PT Cruiser is a 2.4-liter four-cylinder that makes 150 hp and 165 pound-feet of torque. Chrysler fits this engine to the base and Touring models.

    When did the Chrysler PT Cruiser come out?

    Chrysler’s PT Cruiser convertible went into production in early 2004 as a 2005 model. Styling features include a broad sport bar above the passenger area. For 2008, it also gains seat-mounted side airbags.

    How much HP does a PT Cruiser have?

    performance & mpg. The base engine for the PT Cruiser is a 2.4-liter four-cylinder that makes 150 hp and 165 pound-feet of torque. Chrysler fits this engine to the base and Touring models.

    What are the pros and cons of a PT Cruiser?

    Milage on mine is 85,000. So far Pros: Stick shift has great pick up and very fun to drive. After 9yrs of driving this car, the seats are still super plump and comfortable and offer plenty of back support. The back seats are very simple to remove so I can haul an amazing amount of stuff.

    Why do people not like the PT Cruiser?

    It’s what the car has come to represent as the Boomers who originally bought the PT Cruiser begin getting rid of them. And we don’t like what the PT Cruiser has come to represent.

    What are common problems for Chrysler PT Cruisers?

    • Engine Problems. Some of the most common problems with the PT Cruiser involve the vehicle’s engine.
    • Electrical Problems. Another series of common PT Cruiser problems center upon the electrical system.
    • Mechanical Recalls.
    • Safety Recalls.
    • General Problems.

      Which is the best part for a PT Cruiser?

      Genuine Chrysler parts are the smart choice for repair, maintenance, or upgrade of your Chrysler Pt Cruiser . When you choose OEM parts for your vehicle, you’re choosing to maintain the quality and reliability of your vehicle, ensuring peak performance mile after mile.

      Why does my PT Cruiser engine keep shutting off?

      The engine randomly shuts off while driving my 2001 PT Cruiser Limited Edition. Sometimes it doesn’t even shut off–all of the gauges will start moving up and down as if it’s struggling to stay on. Sometimes it’ll end up being fine, others it’s constantly struggling, and other times it just keeps turning off while driving.

      Genuine Chrysler parts are the smart choice for repair, maintenance, or upgrade of your Chrysler Pt Cruiser . When you choose OEM parts for your vehicle, you’re choosing to maintain the quality and reliability of your vehicle, ensuring peak performance mile after mile.

      The metal of the wheels deteriorates causing the chrome coating to peel off. Air from the tire will leak from the valve stem area. This can cause flat tires. It can also cause the tire to split when driving at a high rate of speed on a highway. There is no way to prevent the chrome from peeling.

      How many miles does a Chrysler PT Cruiser have?

      I picked up my new-to-me 2009 PT Cruiser last Saturday from Bob Novack Auto Group in Bridgeton, NJ, last Saturday. This car looks like it just came off the assembly line….it has 43,000 miles on it but you would never know it by looking or diving it.

      When was the last Chrysler PT Cruiser made?

      The PT Cruiser is a family vehicle that was discontinued in 2010. Read more Chrysler reviews to learn about other models.

      At best, it might hold one small suitcase and a couple of bags of groceries. The trunk does not hold anything with height to it. Items usually have to be laid flat in order to fit. The back passenger area does not provide much leg room.

      Are there bells and whistles on a Chrysler PT Cruiser?

      This car has no bells and whistles as well as no road noise reduction. While it is roomy inside any repairs outside requires removal of non related parts making self repairs a nightmare and too expensive to hire a mechanic.

      What kind of transmission does a PT Cruiser have?

      by Bernie from San Diego, CA on Wed Jul 13 2011 Traded in my well-liked 2004 PT Cruiser with standard shift for a 2009 model with an automatic. The newer model is less quiet, with a whiny transmission at 60 mph that only shifts frequency at 75 mph. It has less upholstery to dampen the interior noise.

      What kind of engine does PT Cruiser 2.4lt have?

      2006 PT cruiser 2.4lt checked , had code for cyl 4 misfire found oil in spark plugs holes had good spark all cylinders replaced plugs wires and valve cover gasket with valve cover off found intake cam lobes on #4 cyl worn down replaced intake cam ran fine for 30 miles ]

      Why is my 2005 PT Cruiser GT stalling?

      In Feb 11 the fuel purge sensor had to be replaces 200.00, Mar 11 the clutch and pressure plate 900.00. Now I took it in for a oil change and fuel injector cleaning and approx 50 mi after that the engine light comes on and I take it to get the code read and it tells me its “running lean”now it’s stalling and sputtering .

      Why was the Chrysler PT Cruiser called a segment Buster?

      Chrysler famously dubbed the PT Cruiser a “segment buster,” because it defied easy categorization. PT stood for “personal transportation,” and the car was planned to wear Plymouth badges, as concept cars had teased, until Chrysler ended that brand in 1999.

      What was the original name of the PT Cruiser?

      Originally internally designated as the “PT” (Plymouth Truck) [citation needed] and intended as part of the Plymouth lineup, the model was to be certified as a truck by NHTSA standards. Subsequent to the demise of the Plymouth brand, the PT Cruiser was instead brought to market as part of the Chrysler range.

      How many horsepower does a PT Cruiser have?

      It produced 140 hp (104 kW) SAE at 6500 rpm with 130 lb⋅ft (176 N⋅m) of torque at 4800 rpm. In July 2000, the PT Cruiser replaced the Neon in Japan as their small car offering.

      Is there Sirius Satellite Radio in a PT Cruiser?

      Sirius Satellite Radio also became an option that could be installed as a dealer option with a factory appearance (i.e. roof mount satellite antenna). For 2010, the last year of production for the PT Cruiser, there was only one trim level available: the PT Cruiser Classic.

      Where can I find the VIN code for a Chrysler PT Cruiser?

      The odometer will go through 1111111 through 999999, then display the car’s serial number and some other, irrelevant information, then show the error codes starting with P. Note that this method may not work. It’s easier but not necessarily better. You can also get the codes using an OBDC III scan tool.

      What happens if there is no computer code on my PT Cruiser?

      Alan Borgolotto noted that “if you do it too quickly it doesnt work (got to wait to see the odometer light up” and that if you have no codes, the odometer will say “done.”

      What are the lights on the dash on a PT Cruiser?

      Chrysler PT Cruiser Dash Lights Instrument Cluster lights ON & OFF Blinking COMMON PROBLEM! – YouTube If playback doesn’t begin shortly, try restarting your device.

      Originally internally designated as the “PT” (Plymouth Truck) [citation needed] and intended as part of the Plymouth lineup, the model was to be certified as a truck by NHTSA standards. Subsequent to the demise of the Plymouth brand, the PT Cruiser was instead brought to market as part of the Chrysler range.

      How to get the fuel injection code on a Chrysler PT Cruiser?

      All Chrysler vehicles with fuel injection have had some form of “error checking.” In many older vehicles, a person could easily turn the key back and forth a few times to get a two-digit code . With the PT Cruiser, a longer code seems to be used.

      Where do I find the code on my PT Cruiser?

      To get the codes, move the key from Run to Off to Run to Off to Run within five seconds. It does not always work the first time. (Run is JUST before Start). The code will show up in the odometer – thank your lucky stars for this, since the codes used to get blinked on the engine light.

      Why are the wheels on my PT Cruiser peeling off?

      The typical repair cost for peeling chrome wheels is $860. The metal of the wheels deteriorates causing the chrome coating to peel off. Air from the tire will leak from the valve stem area.

      The common symptoms for the 2007 PT Cruiser are overheating accompanied by the engine light turning on. The code P0340 is often displayed as the problem for owners. This code means that the camshaft position sensor circuit sensor A bank 1 is malfunctioning. As we will see below this code makes sense since replacing the camshaft fixes the problem.

      How much is the PT Cruiser engine control module?

      10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Just because your vehicle has a retro style appeal, doesn’t mean that it’s not equipped with some of the latest technology to improve its fuel economy and performance. Keep up your vehicle’s performance with a new Chrysler PT Cruiser engine control module from AutoZone.

      The Chrysler PT Cruiser is a 5-door hatchback released by Chrysler in 2000, and a 2-door convertible in 2005. This is a retro styled compact car which was in production till 2010.

      Which is the best parts company for PT Cruiser?

      Dealing with foremost brands such as Mopal, Fel-Pro, Accel, Gates, Carlson, etc., we guarantee top-notch quality and reliability of all parts. Our attractive prices make it easy to say yes.

      How to contact the Chrysler customer service team?

      Should you encounter an issue accessing any content on Chrysler.com, please contact our Customer Service Team at 800-247-9753, for further assistance or to report a problem. Access to https://www.chrysler.com/webselfservice/chrysler/ is subject to FCA’s Privacy Policy and Terms of Use.

      What to do if you have an issue with Chrysler?

      Should you encounter an issue accessing any content on www.chrysler.com, please email our Customer Service Team or call 800-247-9753, for further assistance or to report a problem. Access to www.chrysler.com is subject to FCA US LLC’s Privacy Policy and Terms of Use.

      Where can I buy a new PT Cruiser starter?

      Replacement starters are available new, rebuilt and used for your PT Cruiser from auto parts stores, salvage yards and the Chrysler dealer. New units typically have the best warranty, if that is a concern, when purchasing a starter for your car.

      Where was the last Chrysler PT Cruiser made?

      A convertible was introduced for the 2005 model year. The PT Cruiser was manufactured at Toluca Car Assembly in Toluca, Mexico. On March 8, 2006, DaimlerChrysler announced that it had built 1,000,000 PT Cruisers at the Toluca plant. The final PT Cruiser built rolled off the assembly line there on July 9, 2010.

      How many oxygen sensors are on Chrysler PT Cruiser?

      There are two oxygen sensors, upstream and downstream; by comparing the readings, the computer can see how effective the catalytic converter is. The upstream one is somewhat more likely to fail.

      What happens to the engine light on a Chrysler PT Cruiser?

      The “engine light” stays on when a serious emissions or engine problem is found, until the code is erased. Chrysler vehicles have a “limp in” mode which reverts to a pre-programmed “guessing map” for timing, fuel delivery, etc. when a critical sensor fails.

      Why is my knock sensor on my PT Cruiser wrong?

      Knock sensor (#1) signal is wrong. Knock sensor (#2) signal is wrong. A coil is drawing too much current. A required change in air/fuel mixture was not detected during diagnostic test. An problem was detected in the EGR solenoid control circuit.

      11 people found this helpful. my 2007 pt did same thing, engine light came on , car was jerking and bucking, ( had nothing to do with the a/c or heat) it was the cam positon sensor, on line the part is 35.99 to 55.99 depending on where you buy it, local garage did mine part and labor for 162.00 29 people found this helpful.

      It’s what the car has come to represent as the Boomers who originally bought the PT Cruiser begin getting rid of them. And we don’t like what the PT Cruiser has come to represent.

      Why does my 2004 PT Cruiser keep stalling?

      My Wifes 2004 pt cruiser began bucking and stalling, I took it to the shop ,they plug it into their computer and tell me the AC cooling fan itself was burned out causing the car to overheat and stall. So we replaced it and the car still does the same thing.

      How much does a new PT Cruiser cost?

      (Based on a 2001 PT Cruiser Classic, excl VAT) A full exhaust system will be about £500. Brake pads front and rear are about £60 and £70, a starter motor is about £190 and an alternator around £285. You’ll pay around £240 for a new door mirror, roughly £350 for a radiator and about £95 for a replacement windscreen.

      When did I buy my Chrysler PT Cruiser?

      We bought the 2005 PT Cruiser used in 2007. Clearly the original owner LOVED his handsome Cruiser, but traded when problems started. The A/C developed an issue that the dealer couldn’t find but WB Motors in Fairfax, Va. found and fixed. (This is a keepsake vehicle kept after my Brother died because he also LOVED it.)

      How often should you change the cooling fan on a PT Cruiser?

      Maintenance is the key here!!! No car runs maintenance free. With the PT’S they have some issues and some repairs that are common. The thermostat is cheap and should be changed yearly no more than two. The cooling fan is electric and changed or checked every 60,000 or so.

      How often do you change the oil on a PT Cruiser?

      We have 6 PT Cruiser that are use for our installers, we change the oil every 4k miles, replace the transmission fluid every 50k miles and they are all running and getting close to 180k to 200k. No major problems, they are very good small vehicles.

      How to diagnose PCM or ECU control module?

      Today we’re gonna be covering 4 steps to help you diagnose your Engine Computer (PCM/ECM/ECU Control Module) as to whether or not it is the issue in your vehicle. The steps we’re gonna be covering are Visual Inspection, a simple Swap, using a tool such as a Scanner, and Process of Elimination. 1. Visual Inspection

      How to test a PCM in a car?

      How to Test a PCM. 1 Step 1: Visual Inspection. Now, before you start doing any surgery on your car, the first thing to do is to check for rust or a disconnected wire. 2 Step 2: Check Your Battery. 3 Step 3: Code Scanning. 4 Step 4: Inspect Wiring and Sensors. 5 Step 5: Try a Replacement.

      How can I tell if my PCM is faulty?

      You need to check the sensors that are connected to your PCM, as well as the wires that connect them. If you’re seeing a PCM code – or two, or three – it can really help you narrow in on which sensors or wires are faulty.

      What is the error code for a PCM?

      We’ve written about several PCM-related error codes in the past, including the P0603 code, the U0100 code, the P0113 code, and the P0606 code. Obviously, this isn’t an exhaustive list, but it represents the most commonly-displayed error codes.

      What was the problem with my PT Cruiser?

      I HAVE A 2007 PT CRUISER AND IT OVER HEATS BUT BLOW OUT COLD AIR, I DID CHANCH THE THERMOSTAT BUT IT STILL OVER HEATS WITH COLD AIR BLOWING OUT 144 people found this helpful. elizabeth, im having that problem, what did it end up being??

      What’s the oil level on a Chrysler PT Cruiser?

      The oil level in the engine block is a tad above the full line, so there’s plenty of oil in the engine, but is was also doing this when the oil level was a little above the ’empty’ line on the dipstick.

      What should I do about my PT Cruiser overheating?

      Checked debris between condensor and fan, fan works, coolant full, thermostat works, all relays good, changed egr valve and thoroughly cleaned egr tubing, no cracked head or head gasket problem. Getting to my wits end and ready to take long drive off short pier. Any ideas what’s wrong or what else I could do to fix this problem?

      How can I bypass the car alarm system?

      Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.

      Are there any changes to the Chrysler PT Cruiser?

      No major changes for 2009. The 2009 Chrysler PT Cruiser continues as one of the most stylish and fun-to-own compact wagons on the market. While some may argue its retro look has grown tiresome, sales remain strong, as does the demand for aftermarket parts and accessories.

      What kind of interior does a PT Cruiser have?

      The 2009 Chrysler PT Cruiser’s innovative interior includes a satin-finish dash trim, a retro-looking color-keyed ball shift knob and tall, upright seating.

      Usually a bad or failing power door lock actuator will produce a few symptoms that can notify the driver of an issue that should be serviced. 1. Unusual noises coming from inside the door Unusual noises coming from inside the door are one of the first symptoms of a potential problem with a power door lock actuator.

      What was the last year the PT Cruiser was sold?

      Also by 2009, the market excitement that surrounded the PT Cruiser for its first few years had dimmed significantly, with sales of 18,000 and then just 9,400 in 2010, its final year. That was down from the 2001 peak of nearly 145,000.

      Why does my PT Cruiser just stop running?

      No sputter or any indication of a problem. Just stopped running. It has 3/4 of a tank of gas so that isn’t my problem. This happened on trhe final leg of a 45 mile drive home from work. The car ran perfectly during the drive home until it just stopped running. Thre is no gas smell.


      What to do if your PT Cruiser overheats?

      1. Work on cool engine 2. Drain overflow tank. Pull off hose at tank site. Use a throwaway cup to catch antifreeze. 3. Put overflow tank hose back after draining to add mark. 4. Open bleeder valve 10 mm and remove overflow hose at radiator end. 5.

      Where is the PCM on a PT Cruiser?

      The TCM on 03 and newer PT Cruisers are located in the PCM with is located next to the brake master cylinder in the engine compartment.

      What type of transmission fluid for PT Cruiser?

      Chrysler recommends using HOAT (Hybrid Organic Acid Technology) formula coolant in PT Cruiser. Should be a rubber plug on the left side just above the axle shaft. The manual transmission in your car uses Chrysler type ATF+4 automatic transmission fluid, they have not used gear lube for years now.

      Who makes PT Cruiser?

      Originally conceived as a Plymouth model, the PT Cruiser received the Chrysler nameplate on introduction in anticipation of the 2001 discontinuation of the Plymouth brand. The PT Cruiser was designed by Bryan Nesbitt, who later also styled the Chevrolet HHR.

Author Image
Ruth Doyle