Is the bobcat 773 with turn over but not start?
Is the bobcat 773 with turn over but not start?
Bobcat 773 with turn over but not start. | LawnSite™ is the largest and most active online forum serving green industry professionals. Bobcat 773 with turn over but not start.
Where is the cab fuse on a bobcat?
Click to expand… cab fuse is a 5a located in the fuse/relay box. cab fuse is a 5a located in the fuse/relay box. Click to expand…
How can I tell if my bobcat has power or ground?
check for power and ground with the key off, you should see 12v. with the harnesses reconnected, and key on, backprobe the orange wires, you should see 12v. if you dont have power and ground through the harness, move your ground to a good known frame ground, and recheck for 12v.
Bobcat 773 with turn over but not start. | LawnSite™ is the largest and most active online forum serving green industry professionals. Bobcat 773 with turn over but not start.
What should I do if my Bobcat loader is not running?
Do not overfill the reservoir; hydraulics work best with the exact amount of fluid in the system. Check the hydraulic fuel filter. If it’s clogged and fluid can’t flow freely, power to the loader will be reduced. Be sure the hydraulic pump (located in front of the engine) is operating to specifications.
Is the bobcat lift tilt actuator bad?
Based on the post located here: http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=20221 , I switched the wires to see what would happen. The code switched from 32-50 (tilt actuator short to ground) to 32-49 (lift actuator short to ground), so I guess supports the idea that the actuator is bad.
Where do I find the fault code on my Bobcat?
First select your vehicle and then find the fault code in that page. Although we try our best to provide our visitors with the most accurate information that we can find about your skid steer, we cannot be held responsible for any errors. Bobcat is equipped with a universal skid steer quick hitch.
What kind of engine does a bobcat 873 have?
A ’99 873 should have a Deutz oil cooled engine in it. And if you don’t know the machine service/repair history, at 2400 hrs, you might save yourself some aggravation by going ahead and replacing the timing belt. If it lets go, gets more [less] interesting. The 873 was a rather big machine, but it’s weak point was the loader arms.
When did I buy my first Bobcat skidsteer?
Discussion in ‘ Skid Steers ‘ started by Willis Bushogin, Jun 20, 2011 . I just bought a 1999 Bobcat 873 skidsteer. I think it has like 2400 hours on it I have owned skidsteers before, but never a Bobcat. This machine was used at a fertilizer factory so its rusty. or final drive, etc
Where is the timing belt cover on a bobcat?
There is typically one special “torx plus” screw that holds the timing belt cover on, seems like it’s at the bottom of the cover, unless someone previously threw it away. It’s simply a notched, flat, timing belt.
What are the warning signs on a bobcat?
HP – Hydraulic Oil Pressure -1 – Shutdown (Engine can be restarted for 30 second periods to move loader) -2 – Warning The versatile Bobcat quickly turns into a multijob machine with a tight-fit attachment hook-up …etc from bucket to grapple to pallet fork to backhoe, and a variety of other attachments.
Why does my Bobcat Run but won’t move?
The lights all work in the control box and then after a few minutes the valve light starts flickering and the arm\bucket doesn’t move unless i restart the machine. Then sometimes the traction light will go off after the valve light does. The red 10 fuse blew a few times. Thoughts? Hi. New to site so sorry if I make a mistake. I own a 453 F series.
What kind of engine does a bobcat have?
The Bobcat loader has a rear-mounted diesel engine. If the engine won’t start or is not operating properly, start by checking the fuel system (tank, fuel lines and fuel filters). Diesel fuel filters need to be changed on a regular basis, more often in dusty work environments.
Can a bobcat 773 skid steer loader be used?
Buying a used skid steer loader requires you not only to understand Bobcat 773 specs, but also to understand Bobcat 773 problems, be they problems inherent in the model or problems associated with used equipment in general. Bobcat 773 is known for its oversized arms, which give it higher and longer reach when lifting load.
Which is more powerful Bobcat 753 or 773?
At 46 horsepower, it is more powerful than the 40-hp 753 and shares similar power with the 763 models. Of all 700-series models, Bobcat 773 is the one with the heaviest engine, contributing to its improved operational capacity.
What is hydraulic solenoid on bobcat 773 C series?
I believe that my 773 C series with advanced hand controls has a BICS controller with the traction control solenoid (drops the bar to stop movement of the machine) and hydraulic solenoid valve. It also has two auxiliary electric solenoids on the control valve.
Buying a used skid steer loader requires you not only to understand Bobcat 773 specs, but also to understand Bobcat 773 problems, be they problems inherent in the model or problems associated with used equipment in general. Bobcat 773 is known for its oversized arms, which give it higher and longer reach when lifting load.
At 46 horsepower, it is more powerful than the 40-hp 753 and shares similar power with the 763 models. Of all 700-series models, Bobcat 773 is the one with the heaviest engine, contributing to its improved operational capacity.
Who are the owners of Bobcat construction equipment?
Bobcat is a Doosan company. Doosan is a global leader in construction equipment, power and water solutions, engines, and engineering, proudly serving customers and communities for more than a century.
