Is a 4R100 a good transmission?
Is a 4R100 a good transmission?
The 4R100 is a computer controlled 4-speed automatic with a 1,000 lb-ft capacity from the factory. However, like any high-mile automatic transmission, your 4R100 is sure to have some wear that should be addressed before you pump more power through it. Though it’s a good transmission, the 4R100 can be made be better.
How long will a 4R100 transmission last?
I consider the life of a 4R100 to be about 120K miles. If this truck you are looking at has 200K, them most likely it has had a new transmission at some point. I’ve heard of them lasting that long, but not very often. If it breaks, it will cost around 2000-2500 for a shop to rebuild it for you.
Are all 4R100 transmissions the same?
The Ford E4OD and 4R100 four-speed automatic transmissions were basically the same exact transmission, just with different names. The Ford E4OD transmission was updated in 1998 to the newer 4R100. The 4R100 also matched Ford’s big 7.3-liter Power Stroke diesel engines from 1999 through 2003.
How many speeds is a 4R100?
Yup, the 4r100 is 3 gears forward and overdrive and a converter lockup which essentially makes it feel like a 5 spd.
How much torque can a 4R100 handle?
The trans is “rated” for 1000ft/lbs of torque.
How heavy is a 4R100 transmission?
Ford 4R100 Transmission Specs
| Transmission: | Ford 4R100 |
|---|---|
| Weight: | Approximately 270 lbs |
| ATF Type/Spec: | MERCON V ATF (Motorcraft XT-5-QMC) (MERCON V replaces the now defunct MERCON ATF) |
| Fluid Capacity: | 17-18 qts (U.S. quarts) |
| Transmission Filter: | Ford YC3Z-7A098-BA |
How much boost can a stock 7.3 handle?
‘94.5-’99 7.3L: 380 to 400rwhp Either charger can hold up to 30-35 psi of boost for a while, but 40 psi or more is asking a lot for a turbo that was originally intended to see a maximum of 17 to 23 psi.
How much does a 4R100 transmission cost?
Replacement 4R100 Transmission Prices:
| Transmission | Street Smart Transmission | Dealer Retail |
|---|---|---|
| 4R100 / E4OD | 1775 | 3228 |
What years did Ford use the 4R100 transmission?
Ford 4R100 Transmission Specs
| Transmission: | Ford 4R100 |
|---|---|
| Predecessor: | E4OD |
| Model Years/Applications: | 1999 -2003 Ford Super Duty w/ 7.3L Power Stroke diesel |
| Case Material: | Aluminum |
| Max Input Torque*: | 1000 lb-ft |
What does 4R100 stand for?
What I know is 4=speeds, R=reverse, 100=it is rated to handle 1000lbs of torque.
How much HP can a stock 7.3 hold?
The 7.3 Powerstroke is a two-valve behemoth which measures in at 444 cubic inches and has a maximum stock power rating of 275hp and 525lb. ft. of torque.
How much horsepower can a 6R140 handle?
TorqShift 6R140 (six-speed) Ford’s 6R140 is one beast of a transmission, and a worthy successor to the 5R110. There are a number of 6R140s out there handling 500 to 600 hp with just electronic tuning, and the aftermarket parts already exist to build a 6R140 capable of supporting more than 1,000 hp.
The 4R100 is a computer controlled 4-speed automatic with a 1,000 lb-ft capacity from the factory. The last year of production was 2003. This means that most of the Ford F-250 and F-350 trucks that run this automatic transmission have seen a lot of miles.
Which fluid for 4R100?
The 4r100 requires Mercon, Ford changed the recommendation to Mercon V when they quit selling Mercon. Mercon rated fluid is fine to use in the 4r100. Valvoline max life dexmerc and 99% of the other dexmerc is the closest oil to the original Mercon.
What is fluid for 4R100?
fords reccomended fluid for the 4R100 (E4OD) is standard mercon (dextron III). if you are going to use anything else go with a name brand full synthetic that is compatable with mercon…IE amsoil, redline, ETC…….
