How to reset the oil life on a GMC Yukon?

Follow the instructions below to reset the engine oil life system on your GMC Yukon: Don’t start the engine! Done! For older vehicle (2000-2006), the Engine Oil Life System can be reset as follows: Turn the ignition key to position “ON” without starting the engine Fully press and release the accelerator pedal three times within five seconds.

How do you reset the oil life system?

For older vehicle (2000-2006), the Engine Oil Life System can be reset as follows: Turn the ignition key to position “ON” without starting the engine Fully press and release the accelerator pedal three times within five seconds. Note: Repeat the process, if the message illuminates when you start the engine.

When did the GMC Yukon XL come out?

The Chevrolet Tahoe and GMC Yukon currently serve as a part of General Motors’ full-size SUV family. Lengthened wheelbase models are available for both as the Suburban for Chevrolet and Yukon XL for GMC. A luxury Denali model joined the Yukon lineup in 1998 for the 1999 model year.

How to reset the oil light on a GMC Yukon?

GMC Yukon Change Engine Oil Light Reset Procedures: 2003-2015. Turn ignition switch to ON position with engine off. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets.

How to reset the change engine oil light?

GMC Yukon Change Engine Oil Light Reset Procedures: 1 Display the “Oil Life Remaining” message in the Driver Information Center 2 Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET) 3 The oil life will change to “100%”

How do you change the oil in a Chevy Silverado?

Turn ignition switch to ON position with engine off. Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”. Press and hold the SET button until the display reads “100 percent”. You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.

When to use service engine soon instead of check engine light?

Some manufacturers use the service engine soon light instead of the check engine light when there is just a minor problem with your car and not a severe problem. It could also mean that it is time for a scheduled service, such as oil or spark plug replacement.

Why does my check engine light not light up?

If your Check engine light is ON, the easiest way to diagnose this problem is to always check your trouble code memory with an OBD2 scanner. The check engine light will not light up if there is a scheduled service as the service engine soon light.

Do you have to reset the oil change light?

It is not a sensor to check if your oil is clean or dirty, if you just changed your engine oil 2 weeks ago, you have to reset the timer (The change oil light) All you have to do is to reset the oil change light by following the step by step procedures in your car’s owner manual. Save up to 80% on your next printer ink cartridges!

Why is my Check Engine light not working after an oil change?

If you notice the light after an oil change, something else is wrong. Your mechanic has the necessary parts to run tests and get to the bottom of what’s wrong. Five of the most common things we see from check engine lights are:

What to do when your oil soon light comes on?

Press and hold the odometer button. Insert the key and just turn long enough for the inside lights to turn on, but not try to start the car. Hold this position for about 20–30s, and then the check engine light should turn off. Now you can release everything, shut the door and start the car.

What should I do if my service engine light is on?

Service Engine Light: Your Mechanic’s Dirty Little Secret Check engine light on? Here is how to use an OBD-II scanner for free to diagnose the service engine light & save money vs a mechanic fee. Menu Home About About Contact Categories Investing Banks CDs Dividends ETFs Finance Guru Commentary Index Funds Inflation Market Terminology Mutual Funds