How to reset Chevy Silverado oil life soon light?

How to Reset Change Engine Oil Light on Chevy Silverado 2018: To turning off the Change Engine Oil Life Soon Light on 2016 2017 2018 2019 Chevy Silverado, conform to the following instructions: Turn the ignition to position ON without starting the engine. Finally, hold down the button until the “Oil Life” display changes to 100 percent.

How to reset the warning light on a Chevy Silverado?

It is recommended to perform a proper diagnostics check before attempting to reset any warning light, as warning lights are the only way your truck may communicate that there is something wrong. Once you’ve performed the diagnostics check, follow this guide to reset the warning light.

How to reset the Stabilitrak system on a Chevy Silverado?

Verify that the Stabilitrak button has not been pushed manually, or that the current weather conditions don’t warrant the disabling of the Stabilitrak system. If neither of these are the case, then read on to learn how to reset the system.

How do you change the oil on a Silverado?

2014-2020 SILVERADO CHANGE ENGINE OIL SOON. On this tutorial we need to use the DIC BUTTON. see image below. Turn the Ignition On, Don’t start the ENGINE. Use the DIC Button . Press the LEFT ARROW button then use UP ARROW to select INFO, T hen Press the CENTER BUTTON. Use the UP or Down Arrow, to navigate and to display the REMAINING OIL LIFE.

How to reset service light on Chevy Silverado?

The reset procedure is tedious, and as most Chevy owners agree, unorthodox. However, this procedure must be completed in order to reset the service light. Set the truck to park. Turn the ignition to the RUN position, while the engine remains turned off.

How to reset the change oil message on a Chevrolet Silverado?

2002 to 2006 Chevrolet Silverado. Insert your key into the ignition, and turn it to position “A” (Run/On) without cranking the engine. Depress the gas pedal three times within five seconds. The “Change Oil” message will begin to flash. Turn the ignition to position “A” (Lock/Off) once the light stops flashing (about 10 seconds).

What is the service tire monitor light on a Chevy Silverado?

This article applies to the Chevrolet Silverado 1500 (1999-2006). The service tire monitor light is a warning bulb connected with the TPMS or Tire Pressure Monitor System, which notifies the driver of low or high air pressure in the tires.

How do I reset anti theft system Chevy Silverado?

Have a 2015 Chevy2500 duramax Noticed this morning not charging so Ipur 2 new batteries in it and know it won’t start In a chevy silverado, you will try to reset the anti-theft system by turning the key on until the yellow lock goes out on the instrument panel for about 10 minutes.

How to change the oil on a Chevy Silverado?

Follow the instructions below to reset the engine oil life system on your Chevrolet Silverado: Turn the ignition to the ON position without starting the engine. . . . Hold down the button until the “Oil Life” display changes to 100 percent. . This tutorial we got from the Chevrolet owner’s manual.

How do I reset the oil soon light?

Push and release the accelerator pedal fully three times within five seconds while monitoring the dashboard lights. Verify the behavior of the change oil soon light. If the change oil soon light flashes two times, the system is reset.

What does the oil change light on a GMC Chevy mean?

The oil change light on your Chevy or GMC is meant to keep you on track with your vehicle’s scheduled maintenance. The oil change light is triggered when the vehicle has counted down the expected life of your oil to zero. If you’ve had your oil changed at an authorized dealer, the technician will reset the light as part of the service.