Easy tips

How to re-connect power door lock and driver side power window?

How to re-connect power door lock and driver side power window?

Re-connect door window controller and locks wiring harness 5. Place the key in the ignition and turn to the run position 6. Connect Battery starting with the negative cable (ensuring not to connect then disconnect, (one swift motion)

Why is my power door lock not working?

Power door locks and driver side power window not working. Keyless remote will not open doors although when pressed, the interior lights come on so I don’t believe it is an issue with the fob battery. Other power windows work, just not the driver side. Remote mirror control on the door handle works.

How to connect battery to power door lock?

Connect Battery starting with the negative cable (ensuring not to connect then disconnect, (one swift motion) 8. You should hear a series of dings 9 Once dings are heard remove the key from the ignition and you should hear the door lock solenoids activate..

Where are the power locks on my car?

There is a single relay that controls both the power locks and the driver’s side window, located inside the driver’s side window switch. It can get stuck open, either from the BCM sending it into safe mode or, in my case, I think, because of extreme cold.

Re-connect door window controller and locks wiring harness 5. Place the key in the ignition and turn to the run position 6. Connect Battery starting with the negative cable (ensuring not to connect then disconnect, (one swift motion)

Power door locks and driver side power window not working. Keyless remote will not open doors although when pressed, the interior lights come on so I don’t believe it is an issue with the fob battery. Other power windows work, just not the driver side. Remote mirror control on the door handle works.

Connect Battery starting with the negative cable (ensuring not to connect then disconnect, (one swift motion) 8. You should hear a series of dings 9 Once dings are heard remove the key from the ignition and you should hear the door lock solenoids activate..

There is a single relay that controls both the power locks and the driver’s side window, located inside the driver’s side window switch. It can get stuck open, either from the BCM sending it into safe mode or, in my case, I think, because of extreme cold.

Where is fuse # 42 on power door lock?

If not, fuse #42 may be blown ( located in the underhood fuse box.) They say closing both windows at the same time or operating window and lock switches at the same time blows the fuse. You can’t post conmments that contain an email address.

Is the driver’s side turn signal working?

Driver’s side turn signal works intermittently. Mostly it doesn’t work, but once in a while it will. From the inside, there is no clicking and no green arrow. NOTHING happens. Its doesn’t appear to be affecting the light itself, hazards are fine and brake and tail lights are fine.

Why does my drivers side window not work?

A smaller version of GM’s rebirth of the Hummer. Hard to start yesterday,drivers side window,power door locks wont work,either by buttons on both doors or on key fob.Other windows work! Replaced Battery checked door lock fuse,still no drivers side window or door locks. Answered! View the answer I have this problem too Is this a good question?

Are there switch kits for power door locks?

Switch Kits for Power Window & Power Door Lock Kits Part # Description Doors 4980-21-007 2 Door console mount switch kit Illumina 2 door 4990-10-142 2 Door Illuminated Rocker Switch Kit Wit 2 door 4990-10-421 Joker style power window switch kit (bla 2 door

How do you mount a power window switch?

2 Door power window switch kit for door panel mounting (comes with one dual and one single switch). Illuminated surface mount switch kit by Spal. Switches mount in small panels on door panels. (3 switch kit) With raised bezels for door panel mounting. Switches can also be mounted without bezels. (3 switch kit) Push-pull style switches.

Author Image
Ruth Doyle