Easy tips

How to perform a Chevy Suburban drive cycle?

How to perform a Chevy Suburban drive cycle?

C. Accelerate: Turn off the air conditioner and rear defroster and begin driving your Suburban. As soon as possible apply half throttle until 55mph is reached. The ECU will now run self-tests on the Misfire Detection, Fuel Trim, and EVAP Purge Flow. D. Hold Steady Speed: Hold your speed steady at 55 mph for three minutes.

What are the specs of a 2004 Chevy Suburban?

GM’s StabiliTrak electronic stability system is offered on half-ton Suburbans equipped with the 5.3-liter V-8 engine. Half-ton models gain a tire-pressure monitor and Hydroboost braking for 2004, and front passenger-seat occupants get a seat belt reminder. Traction assist is available and includes a locking rear differential.

Is the Chevy Suburban a 2 wheel drive truck?

The Suburban is available with two-wheel drive or four-wheel drive. It is built on the company’s full-size Silverado pickup truck platform, which is also used for the Tahoe and GMC Yukon SUVs. The Suburban is offered in half-ton (1500) and three-quarter-ton (2500) capacity ratings and in LS, LT and Z71 trim levels.

What kind of engine does a Chevy Suburban have?

XM Satellite Radio and a Panasonic DVD entertainment system are available. All Suburbans have trizone climate control. The sole engine in the light-duty Suburban 1500 is a 295-horsepower, 5.3-liter V-8. A 325-hp, 6.0-liter V-8 is standard in the 2500 series, and a 320-hp, 8.1-liter V-8 is optional.

How many miles does a Chevy Suburban 1500 drive?

1st owner drove an estimated 16,819 miles/year • 2nd owner drove an estimated 5,922 miles/year • 3rd owner drove an estimated 0 miles/year • 4th owner drove an estimated 2,345 miles/year • 5th owner drove an estimated 12,112 miles/year • 6th owner drove an estimated 0 miles/year.

Where was the 2004 Chevy Suburban 1500 last serviced?

Mileage: 182,568 miles Body Type: SUV Color: Beige Engine: 8 Cyl 5.3 L No accident or damage reported to CARFAX. Purchased on 11/30/04 and owned in TX until 06/05/21. Driven an estimated 9,516 miles/year. Last serviced at 157,110 miles in San Antonio, TX on 04/22/21 • Vehicle serviced • Oil and filter changed • Question about this Walmart record?

How often should I do the drive cycle on my Chevy Suburban?

This ends the drive cycle. Performing the drive cycle on your Chevy Suburban at least twice will ensure all monitors run, including the EVAP monitor, and your Chevy Suburban is ready for the smog check. Should you want to perform specific Monitor self-tests follow the steps below.

With gigantic interior room, the Suburban comes available in either two or four-wheel-drive, in either the 1500 or the 2500 series. 1500 models come equipped with a 5.3-liter V8, while the 2500 models feature a 6.0-liter or an 8.1-liter V8. Two trim levels are available – the LS (or LS 4WD) and the LT (or LT 4WD).

What’s the idle time on a Chevy Suburban?

B. Idle Time: Run engine (do not drive) for 2 1/2 minutes with the air conditioner on and rear defroster on. During this period the ECU will be running the Oxygen Sensor Heater self-test, Air Injection System Passive Air test, EVAP Purge “No Flow” test, Misfire Detection.

How long does it take to cold start a Chevy Suburban?

A. Cold Start: Begin from Cold Start, and ignition in OFF position for at least 1 hour. Ensure your Chevy Suburban’s fuel tank is between 1/4 and 3/4 full.

What is mode 6 on a Chevy Suburban?

Mode 6 (emissions diagnostics tool) is especially helpful for a well trained smog technician. The Chevy Suburban drive cycle below will complete or make ready your SUV’s emission monitors, including the EVAP monitor, Oxygen Sensor monitor, EGR monitor, Secondary Air Injection, and Catalyst monitor.

C. Accelerate: Turn off the air conditioner and rear defroster and begin driving your Suburban. As soon as possible apply half throttle until 55mph is reached. The ECU will now run self-tests on the Misfire Detection, Fuel Trim, and EVAP Purge Flow. D. Hold Steady Speed: Hold your speed steady at 55 mph for three minutes.

Mode 6 (emissions diagnostics tool) is especially helpful for a well trained smog technician. The Chevy Suburban drive cycle below will complete or make ready your SUV’s emission monitors, including the EVAP monitor, Oxygen Sensor monitor, EGR monitor, Secondary Air Injection, and Catalyst monitor.

A. Cold Start: Begin from Cold Start, and ignition in OFF position for at least 1 hour. Ensure your Chevy Suburban’s fuel tank is between 1/4 and 3/4 full.

B. Idle Time: Run engine (do not drive) for 2 1/2 minutes with the air conditioner on and rear defroster on. During this period the ECU will be running the Oxygen Sensor Heater self-test, Air Injection System Passive Air test, EVAP Purge “No Flow” test, Misfire Detection.

Where can I get a replacement Chevy Suburban key?

1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Chevrolet Suburban Non-Transponder Key Replacement (P1113/B102) Call Us 24/7: 800-223-1453 Q: I lost my Chevrolet Suburban car keys, have no spare, and need a replacement. How and where can I get a replacement key?

When did Chevy Suburban stop using transponder keys?

Non-transponder Keys: 1970 to 2006. Please keep in mind that while some keys or key fobs may look the same, they have different capabilities/frequencies/keyways. Therefore, having the right key or key fob is essential. Already have your key?

Can you change the VIN on a Chevy Suburban?

The VIN allows the dealer or automotive locksmith to access the key code on file, i.e., to cut you a replacement key by code, which is a very fast and easy process. There are, however, two things to consider: For Chevrolet Suburban vehicles that are older than ten years, there are no codes available.

Is the EVAP still incomplete on my Suburban?

The EVAP, secondary air, and catalyst monitor are still showing as incomplete. I have driven my Suburban 300 miles since the first time I was aware of them not being ready?

What should coolant temp be in Chevy Suburban?

Ensure your Chevy Suburban’s fuel tank is between 1/4 and 3/4 full. Engine coolant temperature must be below 122°F and within 11°F of the ambient air temperature. Do not leave the key on prior to the cold start or the heated oxygen sensor (O2) diagnostic may not run.

Ensure your Chevy Suburban’s fuel tank is between 1/4 and 3/4 full. Engine coolant temperature must be below 122°F and within 11°F of the ambient air temperature. Do not leave the key on prior to the cold start or the heated oxygen sensor (O2) diagnostic may not run.

What’s the price of a 1998 Chevy Suburban?

Here is a nice 1998 Chevy Suburban LT for sale for $3,995.00. It is loaded up with power windows, locks, cruise, tilt, seats, and 3rd row seating. This vehicle has the 5.7 liter V8 engine and automatic transmission.

What kind of car is a 1999 Chevy Suburban?

Topaz Firemist Metallic 1999 Chevrolet Suburban 1500 4WD 4-Speed Automatic Vortec 5.7L V8 SFI Laramie GM Auto Center offers One Low Price, Plain Simple-Always! Customers have told us that the most unpleasant aspect of buying a vehicle is negotiating the price. We’ve decided to give EVERYONE our BEST PRICE right up front.

Where is the throttle position sensor on a Chevy Suburban?

Your Chevy Suburban uses a series of complex sensors to report what is going on to the ECU. The ECU then uses this information to adjust the timing, air fuel mixture, and more. When one of them goes wrong, it can lead to stalling for sure. Throttle Position Sensor – The throttle position sensor is typically located on the gas pedal.

What was the problem with my Chevy Suburban?

I Had same problem with the ac unit… on 95 degree day teh ac decided to get stuck on heating us to like 95 degrees. even turnign off the blower didn’t work it still blew hot air at us… we turned car off and went to have dinner, (in middle of nowhere), we got back in and was fine. THen a year later and this cycle repeats itself.

Author Image
Ruth Doyle