How to adjust the front wheel bearing tourqe?
How to adjust the front wheel bearing tourqe?
1. Install the outer front wheel bearing and the front wheel outer bearing retainer washer. 2. Install the spindle nut 3. NOTE: The break disc and hub should be rotated while adjusting front wheel bearing end play …. 4. Tighten the spindle nut to 40Nm (30 lb/ft) 5. Loosen the spindle nut two turns 6.
What are the specs for a front wheel tourqe?
Tighten the spindle nut to 40Nm (30 lb/ft) 5. Loosen the spindle nut two turns 6. Tighten the spindle nut while rotating the break disc counterclockwise to 23-34 Nm (17-24 lb/ft) 7. Loosen the spindel nut 1/2 turn 8. Tighten the spindle nut to 2 Nm (17 lb/in) 9.
How much torque does a hub bearing have?
Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm
Where is the torque on a GM wheel?
Proper torque specifications for individual GM models should be obtained from their specific service manuals, or torque specification listing. A wheel hub holds the wheel onto the vehicle and the hub bearing, located at the spindle of the wheel hub, allows it to spin freely.
What are torque specifications for front and rear axles?
Torque specification guide Front & rear axle nut torque specifications for FWD, RWD & 4 W/D vehicles One of the most common mistakes during installation is improper torque of the Axle nut. To guarantee the (Bearing, Spindle or Hub) is torqued correctly, follow the manufacture’s installation procedure.
Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm
Where can I find the torque specification guide?
Ensure that you have the correct torque for the application by referring to SKF 457377 torque specification guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life. Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear.
Can a calibrated torque wrench install an axle?
Use a qualified, calibrated torque wrench. Do not use an impact gun to install the axle nut. The impact gun will damage the axle nut. It will also leave your spindle nut under or over torque resulting in hub assembly failure.
