How much does it cost to replace rear drum brakes?
How much does it cost to replace rear drum brakes?
Replacing rear drum brakes (shoes, drums and hardware) in an average car in a repair shop costs from $420 to $750 per axle. Brakes are replaced on both sides at the same time. Drum brake in a car. If you plan on changing your drum brakes yourself, make sure to follow manufacturer’s instructions and safety precautions.
Are there disc brakes on the rear axle?
The majority of modern vehicles have disc brakes, however some vehicles use drum brakes on the rear axle. Rear drum brakes also function as parking brakes. Rear drum brakes. The parking brake mechanism is connected to the rear drum brakes via parking brake cables.
What are the problems with an air brake system?
Insufficient Brakes -Brakes need adjusting, lubricating or relining. -Low air pressure in the brake system (below 60 psi). -Brake valve delivery pressure below normal. -Wrong size actuators and/or slack adjusters. -Failure of part of a dual air system. -If remote mounted brake valve, check linkage. 2.) Brakes Apply Too Slowly
Can a brake caliper be removed from a car?
Loosen the bolts that hold the brake caliper on, but don’t remove them completely yet. You should have something handy to hang the brake caliper out of the way. You don’t want to have to disconnect the brake line (lots of brake bleeding), but you don’t want to let the caliper’s weight pull on the line, either.
How do you replace a brake rotor at Advance Auto Parts?
You may need to compress the caliper piston in order for the caliper to slide back on the rotor. Use a c-clamp or caliper spreading tool—borrow one for free at your local Advance Auto Parts. If you use a c-clamp, position the clamp on an old brake pad and the back of the caliper’s piston, then tighten.
What to do if your brake rotors are cracking?
If your old rotors show signs of bluing, glazing, or cracking or if you’ve noticed a pulsation or shimmy while braking, just go ahead and spring for new rotors. Slightly loosen the wheel lug nuts. Then jack up the vehicle and secure with jack stands and wheel stops. Depress the brake pedal 20 times to release residual pressure.
What to use to remove brake caliper fasteners?
Note: Some caliper fasteners require special tools when removing, such as star wrenches or Allen wrenches. You can quickly tell when you look behind the caliper and see the two bolts. Next, unbolt the caliper from the two bracket bolts on the steering knuckle.
What causes trouble shooting on the disc brake?
DISC AND DRUM BRAKE TROUBLE SHOOTING 1. EXCESSIVE PEDAL TRAVEL 2. GRABBING OR UNEVEN BRAKING ACTION 3. FRONT DISC BRAKES VERY SENSITIVE TO LIGHT BRAKE APPLICATION 4. EXCESSIVE PEDAL EFFORT 5. RATTLES OR BRAKE SQUEAL 6. BRAKE CHATTER, ROUGHNESS OR PULSATION 7. PREMATURE REAR WHEEL LOCK-UP UNDER HARD BRAKE APPLICATIONS 8. SCRAPING 9.