How does the Hino quick reference guide work?
How does the Hino quick reference guide work?
The Quick Reference Guide is designed to help you quickly look up parts for commonly ordered parts. The format has been changed from previous years. The main sections are in alphabetical order but the Sub-sections are not. The PART NAMEis listed in the first column.
What are the five groups of Hino parts?
HINO uses five major groups. Engine – Electrical – Drive – Cab Rear Body and Chassis/Tool The sixth column is the FIGURE #that the part can be found in the Hino Electronic Parts Catalog and is helpful if you need other parts in addition to what’s listed in the Quick Reference Guide. See the example shown above from the EPC.
Where is the production series Code on a Hino truck?
This is located just below the VIN number on the VIN plate. The plate is attached to the passenger side doorjamb on all conventional trucks. The Production Series Code can also be found in Dealer Connect through the warranty screen. Go to DC600 then DC611 and then click on options.
What does a check engine light mean on a Hino truck?
A check engine light can mean a simple problem or something more serious; it’s never worth the risk. A check engine light is most often related to engine components, but that isn’t always the case. They say you’re better safe than sorry, and we agree. Always investigate the cause of a check engine light with the help of a trained Hino mechanic.
Where can I find a Hino service manual?
For General Information or Technical Assistance regarding your Hino Truck, please contact your local Certified Hino Dealer. If you need an Owner’s / Driver’s Manual or a Service Repair Manual, please visit the online Publications page . For all other General concerns, email us at: [email protected]
What to do if your Hino truck is under warranty?
If you are a current owner / operator of a Hino truck still under warranty and need emergency roadside assistance, please call HinoWatch on 1-866-365-HINO (4466) 24/7 Hino Blog!
Where to buy a Hino truck in New York?
Visit us at: 75 Arrow Road North York, ON M9M 2L4 (click above for a map/directions) Toggle navigation 1 (855) 919-2882 Inventory Pre-Owned Hino Trucks All Pre-Owned Inventory Buy Back Program 2022 New Hino Trucks Hino Specs 2020 Hino Model Specs 2021 Hino Model Specs Hino Truck Options & Upfitting Hino Trucks Warranty Hino Truck Finder
What kind of torque does a Hino H07C have?
Hino H07C H07CT Connecting Rod Bolt Nut Tightening Torque in three stages with bolt threads lightly oiled : Note: H07C and H07CT connecting rod bolts are stretch bolts, do not reuse a bolt that has been previously torqued.
The Quick Reference Guide is designed to help you quickly look up parts for commonly ordered parts. The format has been changed from previous years. The main sections are in alphabetical order but the Sub-sections are not. The PART NAMEis listed in the first column.
HINO uses five major groups. Engine – Electrical – Drive – Cab Rear Body and Chassis/Tool The sixth column is the FIGURE #that the part can be found in the Hino Electronic Parts Catalog and is helpful if you need other parts in addition to what’s listed in the Quick Reference Guide. See the example shown above from the EPC.
Hino H07C H07CT Connecting Rod Bolt Nut Tightening Torque in three stages with bolt threads lightly oiled : Note: H07C and H07CT connecting rod bolts are stretch bolts, do not reuse a bolt that has been previously torqued.
Where can I get a Hino Truck Repair Manual?
This means more information for more accurate repairs. Hino Trucks dealers and body builders now have direct access to download 3D CAD models (.stp files) of all 2016MY and up conventional and COE chassis to be used for body design via a dedicated website www.hinocaddesign.com.
When is there no Ne signal on a Hino truck?
There is no “NE” signal to the electronic control unit for 2 seconds or more when the crankshaft is cranked by the starter. 1. Open or short circuit in the sensor circuit of the shaft speed sensor pump.
Can a fault code be erased on a Hino truck?
On models with a DLC3 diagnostic connector, fault codes can be erased with a tester. Note: when the battery is disconnected, the memory of other electronic devices (watches, etc.) is erased. 3. Carry out road tests of the car. A. Repeat the diagnostic procedure and verify that there are no fault codes.
Where can I download Hino 2016 COE chassis?
Hino Trucks dealers and body builders now have direct access to download 3D CAD models (.stp files) of all 2016MY and up conventional and COE chassis to be used for body design via a dedicated website www.hinocaddesign.com. The site requires registration and approval from Hino Trucks prior to accessing any information.
What makes the hino300 series of trucks so special?
Inside and out, the New HINO300 Series is designed for enhancing quality. You’ll from the cab. But most of all you’ll notice it where it counts the most – your bottom line. Inside and out, the New HINO300 Series is designed for enhancing quality. You’ll from the cab. But most of all you’ll notice it where it counts the most – your bottom line.
Which is the Hino 195 double cab truck?
The Hino 195-DC is the double cab configuration of the 195. The 195-DC gives room for your whole crew without sacrificing the maneuverability you need to get in and out of tight workspaces. The 195 / 195-DC is available in multiple wheelbase configurations and boasts unsurpassed durability with a 56,900 PSI standard frame strength.
This is located just below the VIN number on the VIN plate. The plate is attached to the passenger side doorjamb on all conventional trucks. The Production Series Code can also be found in Dealer Connect through the warranty screen. Go to DC600 then DC611 and then click on options.
How much does a Hino 145 GVW weigh?
engine Model: J05D-TF (Turbo Intercooled) Total weight lb. 6,790 6,880 6,930 6,980 AT Front axle lb. 4,530 4,620 4,670 4,720 Rear axle lb. 2,260 2,260 2,260 2,260 14,050 lbs.
engine Model: J05D-TF (Turbo Intercooled) Total weight lb. 6,790 6,880 6,930 6,980 AT Front axle lb. 4,530 4,620 4,670 4,720 Rear axle lb. 2,260 2,260 2,260 2,260 14,050 lbs.
How many miles does a Hino cab have?
I”m looking at purchasing a 2009 Hino cab over 26 foot box bobtail truck, it has 177,800 miles on it. Is that decent mileage for that year of … read more Hi my name is XXXXX XXXXX Australia. I have a 1977 Hino bus Hi my name is XXXXX XXXXX Australia. I have a 1977 Hino bus that i am converting to a motor home.
What kind of warranty does a Hino truck have?
HINO INSIGHT TELEMATICS INCL. 5 YEAR / 250,000 MILE WARRANTY INCL. HINO INSIGHT TELEMATICS INCL. 80,000 PSI FRAME STRENGTH – 120,000 OPT. 5 YEAR / 200,000 MILE WARRANTY INCL.
Where can I find the model year of my Hino?
The Model, model year, wheelbase and engine model information is contained on the Vehicle Identification Number (VIN) plate. This plate is located on the drivers door sill as shown. Use the following chart to determine the Model, model year and engine for th e vehicle. W 1998 1 2001 X 1999 2 2002 Y 2000 3 2003 A-2
What causes an air brake valve to fail?
AIR BRAKE SYSTEM TROUBLESHOOTING 1.) Before replacing any valve with a new or remanufactured valve, be sure to blow the air lines out either using the vehicle’s own air supply or shop air. Dirt is the greatest cause of premature air valve failure. 2.)
