Easy tips

How does the antitheft system work on a Malibu?

How does the antitheft system work on a Malibu?

The antitheft system on a 2006 Chevrolet Malibu is activated whenever the doors are locked using the keyless entry remote. This system is designed to prevent the vehicle from being operated by an unauthorized user. The antitheft system uses the horn and lights to draw attention to the vehicle to discourage would-be thieves.

How to deactivate the theft deterrent system on a Chevy Malibu?

Try this: from the inside manually lock all the doors except the drivers, with key in hand exit the vehicle then close and using the key lock the drivers door, wait at least a minute or two then with the key unlock the drivers door and then check to see if the system has been deactivated.

Why is the theft light not blinking on my Chevy Malibu?

It’s not uncommon to have a glitch in the theft passlock system that prevents owners from starting their vehicles. It’s a pesky problem, but easily dealt with when you bypass the system. Initially you’ll notice with the late-model Malibu in our featured video is that it won’t start until the theft light stops blinking.

How to deactivate the anti theft system on GM cars?

How to deactivate the anti-theft system on GM cars 1st WAY TO FIX IT ALL THESE STEPS MUST GET DONE USING YOUR CAR KEY. 1. lock the door 2. unlock the door 3. open it 4. shut it 5. lock the door again 6. wait about 20 seconds • This will shut the alarm off and reset the system.

The antitheft system on a 2006 Chevrolet Malibu is activated whenever the doors are locked using the keyless entry remote. This system is designed to prevent the vehicle from being operated by an unauthorized user. The antitheft system uses the horn and lights to draw attention to the vehicle to discourage would-be thieves.

Try this: from the inside manually lock all the doors except the drivers, with key in hand exit the vehicle then close and using the key lock the drivers door, wait at least a minute or two then with the key unlock the drivers door and then check to see if the system has been deactivated.

How to deactivate the anti-theft system on GM cars 1st WAY TO FIX IT ALL THESE STEPS MUST GET DONE USING YOUR CAR KEY. 1. lock the door 2. unlock the door 3. open it 4. shut it 5. lock the door again 6. wait about 20 seconds • This will shut the alarm off and reset the system.

How does the antitheft system work on a car?

The antitheft system uses the horn and lights to draw attention to the vehicle to discourage would-be thieves. Occasionally, this system needs to be reset when the alarm is triggered accidentally.

How to reset procedure for 2006 Chevy Malibu antitheft?

Allow the ignition to remain in the “ON” position for 30 seconds. Start the engine and verify that the security light is not illuminated. The antitheft system is now reset.

What to do when your Chevy Malibu wont start?

Initially you’ll notice with the late-model Malibu in our featured video is that it won’t start until the theft light stops blinking. The easiest and least evasive way to bypass this system is to insert the key into the car’s ignition and turn it to “auxiliary” for about 10-15 minutes until the light is off.

Allow the ignition to remain in the “ON” position for 30 seconds. Start the engine and verify that the security light is not illuminated. The antitheft system is now reset.

It’s not uncommon to have a glitch in the theft passlock system that prevents owners from starting their vehicles. It’s a pesky problem, but easily dealt with when you bypass the system. Initially you’ll notice with the late-model Malibu in our featured video is that it won’t start until the theft light stops blinking.

Initially you’ll notice with the late-model Malibu in our featured video is that it won’t start until the theft light stops blinking. The easiest and least evasive way to bypass this system is to insert the key into the car’s ignition and turn it to “auxiliary” for about 10-15 minutes until the light is off.

What happens when you disable the alarm on a Toyota?

If you replace the battery, the alarm system will be activated and you will not be able to start the car again until the alarm has been disabled. There is a simple fix for this that will allow you to turn the alarm off and start your car again without using the keyless remote.

Where is the remote button on a car alarm?

This is usually installed underneath the driver’s side dash near the ignition cylinder or under the hood near the windshield. Repeatedly press and release the toggle switch on the system. Do this until the system chirps and the LED light turns off.

Author Image
Ruth Doyle