How do you unstick a Cav injector pump?
How do you unstick a Cav injector pump?
adding ATF to tank to unstick pump/meter parts. gentle knocking outside on pump body to release mildly stuck valve. while cranking engine, move the shut-off lever on the pump rapidly back and forth. towing it a bit to create enough pressure to unstick pump (strange).
How do you remove an injector pump from a diesel car?
Unplug the harness running to the injector pump. Disconnect the quick-disconnect clips leading to the injector pump with your hands. Pull the brake lines off of the clip mounted to the injector pump with your hands. Unbolt the injector pump from the frame with the 3/8-inch ratchet and socket.
What’s the problem with my Massey tractor engine?
My problem massey ferguson 1233 tractor,3-cylinder,Iseki engine. My problem is- excess feul blowing thru #1 cylinder out of exhaust. Thought valave was bad and pulled head ,valves were OK, Replaced injector nozz … read more I have an old massey tractor, with a serial # XXXXX 38054. Could I have an old massey tractor, with a serial # XXXXX 38054.
How do you remove an injection pump on a Perkins Industrial 4.108?
On a Perkins industrial 4.108, the front gear cover must be removed to gain access to the Perkins 4.108 injection pump drive gear. After disconnecting the fuel injection lines, use a 12mm socket to remove the three bolts that are located at the very front of the injection pump which holds the pump drive gear to the pump.
What is the serial number of a Massey Ferguson?
We just bought a massey Fersuson 1949 MODEL 2500 12 VOLT tractor. The battery was not secured and it slipped and hit the fuel line and … read more I have a Massey Ferguson with serial number 9a-385861. What I have a Massey Ferguson with serial number 9a-385861.
Where to find discounted Massey Ferguson injection pumps?
Below you will find our discounted Massey Ferguson injection pump catalog. If you’re looking for other parts, you can search for a specific tractor part to save time, or browse through all of our Massey Ferguson tractor parts on the Massey Ferguson tractor parts page.
What kind of engine does a Massey Ferguson pump fit?
This Massey Ferguson Injection pump fits Perkins AD3.152 engines. Fuel Setting is 58cc. These pumps come fully tested & run before leaving the manufacturer’s plant. Therefore, in accordance with industry standards, warranty will not be honored on seized heads. Injection pumps are extremely sensative pieces of equipment.
How to remove the injector pump from a tractor?
If you are planning to remove the injector pump from your tractor there are a few things that will make this job a lot easier. At the bottom of the page you will find links to downloadable instructions for your brand. If you do not see your brand let us know and we will put the link up for you.
On a Perkins industrial 4.108, the front gear cover must be removed to gain access to the Perkins 4.108 injection pump drive gear. After disconnecting the fuel injection lines, use a 12mm socket to remove the three bolts that are located at the very front of the injection pump which holds the pump drive gear to the pump.
