How do you turn off the tire pressure sensor on a GMC Sierra?
How do you turn off the tire pressure sensor on a GMC Sierra?
Starting with the vehicle off, turn your key to the “On” position, but don’t start the vehicle. Find the TPMS reset button (check your manual if you need help), and hold it until the tire pressure light blinks three times. Then, start the car and wait 20 minutes for the tire pressure light to reset.
How do you program a TPMS on a GMC Sierra?
Follow these instructions to get started:
- Turn the ignition key to the “ON” position without starting the engine.
- Press the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons simultaneously for five seconds.
- Activate the TPMS sensor.
What kind of TPMS sensor does GMC Sierra have?
It is also recommended to do a TPMS reset after a wheel or sensor replacement. The GMC Sierra was manufactured with 315 MHz TPMS sensors from 2004 through 2018. 2020 models are manufactured with 433 MHz TPMS sensors. However, 2019 models are manufactured with BOTH 315 and 433 MHz TPMS sensors.
How to service the GM tire pressure monitoring system?
Servicing GM Tire Pressure Monitoring Systems 1 Set the parking brake. 2 Turn the ignition switch to ON/RUN with the engine off. 3 Press and hold the keyless entry fob transmitter’s LOCK and UNLOCK buttons, at the same time, for about five seconds to start the TPMS learn mode.
How does the TPMS tool work on a tire sensor?
Each sensor has an internal low frequency coil. When the TPMS tool is used in activate mode, it produces a low frequency transmission that activates the sensor. The sensor responds to low frequency activation by transmitting in learn mode.
When to change placard pressure on GMC Sierra?
Use the VT56 or VT46 branded tools to change placard pressure for the GMC Sierra if upsizing tires/wheels, also when replacing with off-road tires or low-profile tires. This feature is available for GMC Sierra models, years 2008-2020. VT56 placard value adjustment now available for March 2019 update!
How does TPMS work on a GMC Sierra?
The GMC Sierra is manufactured with a direct TPMS system, which means TPMS sensors are installed in the wheel. If one or more tires indicate low tire pressure, the TPMS sensors will transfer the information to the vehicle’s ECU.
What’s the low tire pressure warning light on a GMC Sierra?
It was a beefed-up version of the lightweight Silverado / Sierra and was available in the 1500HD, 2500HD, and 3500HD models. If you replacing a spare tire with a road tire containing the TPMS sensor on your GMC Sierra 1500, the system will detect a malfunction and the low tire pressure warning light will blink.
Where is TPMS relearn tool on GMC Yukon?
Press the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons simultaneously until the horn sounds twice Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
