How do you turn off the climate control?
How do you turn off the climate control?
Turn the ignition switch to the “ON” Position. For EA-ED Models, Press the “Floor” and “Off” Buttons Simultaneously and Release. After which, all the Climate Control Panel LED’s should Illuminate. For EF/EL/AU Models, Press the “MODE” and the “OFF” Buttons on the climate control module simultaneously and then release.
What happens when the a / C fan is too low?
The switch really contain two switches. One of them cuts the CCU clutch signal and turns off the compressor if the pressure is too low, (2.5 bar) or too high (27 bar) in the A/C refrigerant circuit system. The other switch set the condenser cooling fan speed to high if the pressure exceeds 17.5 bar.
How does the climate control work on a Ford?
For EF/EL/AU Models, Press the “MODE” and the “OFF” Buttons on the climate control module simultaneously and then release. The control will display 88.8* during the time required for the self-test to be completed. When the self-test is complete, and the system checks are OK the display will read “OFF”.
How does the HVAC system control the cabin temperature?
Control the air temperature in the cabin. This is done by opening and closing the mixer and fresh air servos. Enables the A/C compressor and the condenser fan to cool the incoming fresh (or recirculated cabin) air. Desired cabin temperature is set by the temperature control.
The switch really contain two switches. One of them cuts the CCU clutch signal and turns off the compressor if the pressure is too low, (2.5 bar) or too high (27 bar) in the A/C refrigerant circuit system. The other switch set the condenser cooling fan speed to high if the pressure exceeds 17.5 bar.
Turn the ignition switch to the “ON” Position. For EA-ED Models, Press the “Floor” and “Off” Buttons Simultaneously and Release. After which, all the Climate Control Panel LED’s should Illuminate. For EF/EL/AU Models, Press the “MODE” and the “OFF” Buttons on the climate control module simultaneously and then release.
Why do I need a climate control monitor?
The Climate Control Monitor Mode allows viewing of the Actual Climate Control Sensor Readings and settings, Real time. It also allows bypassing of some of the Climate Control Basic Functions, for assisting in any Diagnostic troubles, and Climate Control Performance Issues.
How is the condenser cooling fan pressure switch connected?
The condenser cooling fan pressure switch has GND connected to pin 3 and closes to pin 2 (brown/black) if the pressure is over 17,5 bar. The CCU is connected to the DME engine control unit, and this signal enable the CCU to stop the fuel supply being cut off on the overrun.
