How do you start a Dodge Ram 1500 without a key?

First, When your battery dies, you have to unlock your vehicle. For that, you need to slide over your key fob & pull out the existing key. With it, you can unlock your vehicle. Then take it near the engine start-stop feature of your vehicle. Push key fob against it and see the magic! So by now, you know how to start Dodge Ram 1500 without a key.

Why does my Dodge Ram 1500 not start?

Just got done with my truck (2002 Dodge Ram 1500 4.7L). It clicked a couple of times and didn’t start, tried it again then started. Go to start it again and nothing. All the dash lights came on when I tried to start it but “no crank” Replaced the starter, battery, ignition switch, and cleaned all the cables to the battery and nothing.

How can I get the codes out of my Dodge Ram?

You can get the codes out by cycling the key on and off three times.On the third time leave the key on and look at the check engine light or the odometer.If you have any trouble codes they will appear there.If you have any codes please let me know what you have and we can go from there.

Are there any problems with the Dodge Ram 1500?

Definitely not the starter.. Known to be problems with these Ram 1500 are faulty ignition switches that burn out but not completely so they work intermediately. if you have enough juice in your battery to run all your lights and accessories then the starter would make at least a half-assed attempt..

What happens when you turn the ignition on a Dodge Ram 1500?

I have a 2000 Dodge Ram 1500 4wd when i turn the ignition nothing happens. Battery indicates full charge, there is also full power in the cab.I checked to make sure vehicle is in park. What else can i … read more

Why is the FOB on my Ram 1500 stuck?

Won’t turn to off position 2014 ram 1500 key fob is stuck. Won’t turn to off position and won’t start … read more Vocational, Technical or Tra…

How can I start my truck without a key? Remove the screws that are holding the electrical part (the part with the wires) and the mechanical part of the ignition switch together. Insert a flat-head screwdriver into the key hole and turn in the same direction as you would your key . This will start your car.

What to do if your Dodge Ram won’t start?

Turn the key in your Dodge Ram to the “on” position, but do not start the vehicle. Once the key is in the ignition and properly placed, check to see that your headlights or wipers are working. If they do not work, the battery has drained or died and will need to be recharged or replaced accordingly. Turn the key to start the truck.

How can I remote start my Ram truck?

Single digit and teens cold (F deg) and so that means I’d like to remotely start my new truck from within the comfy confines of my house 10min prior to departure at 0’dark-thirty in the morning. For the past 3 days I have tried to remote start the vehicle and all I get is two horn beeps – and no start-up.

What kind of remote start does a Dodge Ram have?

There are two types of remote starters. The first is the factory fitted units, which often just plug into place, then there’s the aftermarket kits. If you purchased a new Ram with the factory remote start feature, the dealership would have handed you special remotes made particularly for that truck.

How to fix intermittent start problem with Ram 1500?

DON’T DO THIS WITH ONE CONNECTED TO THE BATTERY, COMPLETELY UNHOOK YOUR BATTERY FROM BOTH CABLES before touching them together. did the trick. lock/unlock worked, and it started right up. some crazy kind of hard reboot of the computer that my buddy found online while we were troubleshooting… 31 people found this helpful.

How long does it take to unlock the remote on a ram truck?

It takes 30 seconds two two minutes for the remote unlock to apply from Uconnect when you lock your keys in the truck. The engine has a grid heater and no glow plugs. On really cold mornings, two heater cycles will aid engine starting.

Why does my 2014 Ram 1500 not start?

Discussion in ‘ Engine & Performance ‘ started by Mark Kiser, Sep 10, 2018 . 2014 Ram 1500 – (2) Key Fob’s won’t start engine. This problem started with intermit no starts with (1) of the key fobs until it wouldn’t start at all.

Why does my intermit key fob not start?

This problem started with intermit no starts with (1) of the key fobs until it wouldn’t start at all. Then the other key fob started doing the same thing. Both key fobs will lock and unlock truck (all buttons work) but no start. When I try the remote start I get a reading that the remote start has been disabled.

Why are my key fobs on my truck not working?

Both key fobs will lock and unlock truck (all buttons work) but no start. When I try the remote start I get a reading that the remote start has been disabled. It seems very odd that both key fobs started having “no start” issues at the same time. I replaced battery in both key fobs and still nothing.

Why is my key not turning on my Dodge Ram?

While there are a variety of reasons your Dodge Ram 1500 key won’t turn, the most common 3 are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.

Can a worn out ignition switch start a Dodge Ram?

With adequate power and ability, your Dodge Ram 1500 is the pick-up truck that simply gets the job done. What doesn’t get the job done or even start your Ram 1500 is a worn-out ignition switch. Replace it with a new Dodge Ram 1500 ignition switch from AutoZone today. Loading Price .. Loading Price .. Loading Price .. With 10 cylinder engine.

Why does my Ram key fob not work?

Ram Key fob works but wont start the truck (solved!!!) – YouTube Ram Key fob works but wont start the truck (solved!!!) If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Why is my Dodge Ram 1500 no start?

Please try again later. This 2004 4.7l Dodge Ram 1500 had an intermittant no crank/no start. Instrument cluster self test revealed no communication with the PCM. Wiggling the wires at the Integrated power module and PCM seemed to help but eventually it refused to crank at all. Problem was traced back to a worn through PCM B+ wire.

How can I open the steering wheel without a key?

Open the keyhole inside of the steering wheel. You can open it by breaking the metal keyhole. This will eventually free the spring unlocking the wheel. Or you can try rotating the steering wheel hard clockwise and anti-clockwise. Doing so will break the pin, which locked your wheel.

This problem may be covered under warranty. Ask your Dodge dealer. No one has added a helpful site for this 2007 Ram 1500 problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code:

What’s the problem with my Dodge Ram 1500?

I have a 2010 Ram 1500 with the same issue. When I turned the key, everything electrical came on, but the engine didn’t crank. I would try the remote buttons on the fob. lock – unlock, lock, unlock, remote start, unlock. Nothing worked.

Where is the reset button on a Dodge Ram?

The reset procedure in your Dodge Ram is as easy as they come. First, park your truck and turn it off. Pull the hood lever under the driver’s side dash, and then pull the safety catch on the front of the hood to open it. Find the power distribution center (PDC); it will be a black box near the battery.

How do you reset the PCM on a Dodge Ram?

Disconnect the negative battery terminal. Insert the key in the ignition and turn it to the “on” position. Do not turn it past this position as if you are starting the truck. Wait 30 seconds, then turn the key to the “off” position and remove it from the ignition. Figure 2. Turn the key to the “on” position and wait 30 seconds.

Why do I need to reset the computer on my Dodge Ram?

It’s common practice to reset the engine’s computer after performing modifications to your car or truck. By doing this, the computer and all related sensors go into a sort of learning mode, allowing it to adapt to changes made that could affect airflow or exhaust (O2 sensor) readings.

Where is the harness connector on a Dodge Ram 1500?

Occasionally the harness connector is located on the center of the steering column. Don’t be confused with the windshield wipers and headlight harness connector. Those two connectors are located on any one of the corners of the column. To avoid being confused, look at the center. No left, no right. Now look for a brown or yellow wire.

Can a worn out ignition switch start a Ram 1500?

What happens when you turn the key to start a Dodge Caravan?

I have a 2002 Dodge Caravan when I turn the Key to start I get nothing, no lights, no nothing if the key is in the on or off position still nothing, no dash lights no headlights no nothing. nothing also with a battery charger on the battery.

Why does my Ram 1500 not start up?

Turn the key, gauges radio everything but the starter comes on. The trick I found I’d if I hold the ignition switch to the starting position, 15, 30, a minute, sometimes longer, it’ll finally crank over and start. Not sure what’s causing this.

What to do if your Dodge Ram wont turn over?

1. Weak or dead battery – Charge or replace the battery if necessary. If the battery is good but it keeps going dead then you need to check or test the charging system. In which case you should refer to the “Electrical Charging – Diagnosis And Testing” section in the repair manual. 2.

Why does my Dodge Ram engine not start?

Dodge Ram engine cranks but will not start refers to when the Dodge Ram truck’s crankshaft rotates but fails to start the motor. This video will detail the 10 reasons why a Dodge Ram will crank but won’t start the engine.

How to test a Dodge 3.9L no start condition?

How To Test The Starter Motor (Dodge 3.9L, 5.2L, 5.9L). As you’re already aware, your Dodge 3.9L, 5.2L, 5.9L pick up (van, SUV) needs three very important things to start: air, fuel and spark. When your Dodge vehicle cranks but does not start, it’s because one of these three components is missing from the mix.

What to do if your Dodge Nitro won’t start?

When you come back to the Nitro, put the key in and turn it to the “Run” position but do not start it! In this position the fuel pump and other electrical components will run.

Why does my car not start when I turn the key?

Do you hear a click coming from under the hood when you turn the key. If so does it happen every time you turn the key over or occasionally. If that clicking occurs when you turn the key over and the car starts but when you don’t hear the click the car doesn’t start. . .

Can a bad ignition switch keep a ram from starting?

A bad ignition switch can cause your Ram not to start at all. And, it can keep your Ram from starting in a couple of different ways. The first is when the starter cranks, but the bad ignition switch doesn’t turn on the fuel pump or ignition. The engine will just turn over with no spark. The second way is when the starter doesn’t turn at all.

Where is the ignition switch on a Dodge Ram?

The ignition switch typically sits directly behind the lock cylinder. It has three main functions. Power the Accessories- This should be what you get when you turn the key to the first position. This allows you to use the power windows, radio, and any other accessory that is equipped in your Dodge Ram.

Why is my Ram 1500 engine not starting?

Turns out is the TIPM. The replacement part won’t be delivered until mid September (4 Months from now) This has happened to me 3 times. Twice in a parking lot and once in my driveway.

How do you start a Dodge Ram 1500 without a key?