How do you replace the camshaft position sensor?
How do you replace the camshaft position sensor?
Replace the camshaft position sensor. Using the scan tool perform the ”Cam/Crank Relearn” procedure. Note: Inspect the camshaft magnetic target for damage. if a problem is found repair as necessary. Reconnect the PCM and CMP sensor 1 harness connectors. Turn the ignition on, with the scan tool, erase DTC.
What is the voltage of the p0340 camshaft sensor?
P0340 Camshaft Position Sensor Circuit – Bank 1 Sensor 1, battery voltage is above approximately 11.0 volts, with the engine cranking and with the engine running.
What do sensor A and B codes mean?
Sensor A indicates that the malfunction is occurring with the camshaft position sensor circuit that pertains to the intake camshaft. Sensor B codes pertain to the exhaust camshaft. What are the common causes of code P0340?
Where is the CMP sensor on the engine?
The camshaft position sensor reacts to a toothed wheel on the camshaft, which gives the ECU constant information on its speed and position. Of course, the CMP is located on the engine, usually somewhere on the cylinder head, so it transmits CMP data to the ECU using wires.
How much to replace a camshaft sensor?
Additional costs will be for the other engine parts that will support the camshaft and engine. A camshaft position sensor, which may be needed or replaced, can can cost $100 to $350 for the part.
What does a cam position sensor do?
The CAM sensor or camshaft position sensor’s role is to signal the ECM the camshaft position. The crank and cam sensor operates in sync with eachother. The CAM sensor is frequently used in determining which injector to fire in a sequential system and for the COP or coil on-plug ignition systems coil firing event.
What is a cam position sensor?
A cam position sensor is a component used to monitor the position of the camshaft. This information is used by the ECM (ECU) to control ignition system timing and other engine parameters.
What causes a camshaft position sensor code?
The most common cause of the P0343 code is a faulty camshaft position sensor or faulty wires to the camshaft position sensor. A common misdiagnosing of this trouble code is that it could be a faulty timing belt timing that will cause the p0343 code.
