Easy tips

How do you program a key fob for a Chevy Traverse?

How do you program a key fob for a Chevy Traverse?

Hold down the “unlock” and “lock” button on your keyless-entry remote until your doors respond by cycling again. This will indicate that the programming was successful. Once the doors cycle again turn the key in the ignition back to “on”. Congratulations, you have successfully programmed your chevy key fob!

Is it possible to program key fobs on a traverse?

In previous model years, it was possible to program key fobs for these vehicles using the vehicle’s Driver Information Center (DIC), if equipped. Programming key fobs through the DIC is no longer an option on the 2011 model year vehicles.

How to program a Chevy GMC key fob?

Please try again later. Programming instructions for GM Key Fob with FCC ID: LHJ011, Koblear1xt and others. This video will show you how to program a new remote for many Chevrolet, GMC, Pontiac, and Cadillac vehicles.

Do you need DIC button for Traverse LTZ?

I have a 2010 Traverse LTZ, which we bought used. I used the DIC buttons to program each remote. The problem is, whichever remote was programmed second, after I program the first remote, I cannot unlock the doors using the second remote. For example, I programmed my wife’s remote first (1st remote) and mine second.

Is the transponder key on the remote fob?

Picked up a third RKE FOB and transponder key as a spare set. The 2011 owners manual goes over how to program the transponder key but not the remote FOB.

How to program a Chevrolet Traverse remote key fob 2009?

An easy to follow video on how to program a remote key fob for a 2009 – 2010 Chevrolet Traverse. 1. Insert Key and turn to ON position so you can access Driver Information Center 2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays 3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays 4.

How do you program the key fob on a Chevy?

On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.

Can You program key fobs on Spring Hill Traverse?

In previous model years, it was possible to program key fobs for these vehicles using the vehicle’s Driver Information Center (DIC), if equipped. Programming key fobs through the DIC is no longer an option on the 2011 model year vehicles. Build Date- July 31, 2009-2nd day of Spring Hill 2010 production.

I have a 2010 Traverse LTZ, which we bought used. I used the DIC buttons to program each remote. The problem is, whichever remote was programmed second, after I program the first remote, I cannot unlock the doors using the second remote. For example, I programmed my wife’s remote first (1st remote) and mine second.

Author Image
Ruth Doyle