How do you program a GMC Canyon key?

The vehicle must be off and all of the keys you wish to program must be with you.

Insert the new vehicle key into the ignition.
Turn the ignition on.
Wait 10 minutes until the security light turns off.
Turn the ignition off.
Repeat Steps 2–4 two more times.
To program the second key, turn the ignition off.

How do you program a key fob for a 2012 Chevy Colorado?

How to Program a Colorado Key Fob

Sit in the driver’s seat of the truck and close all of its doors.
Press and hold the “Unlock” button on the power lock panel of the driver’s side door.
Release the “Unlock” button–the door locks will lock, then unlock, to notify you that the truck is in programming mode.

Is the GMC Canyon a keyless entry vehicle?

A: The GMC Canyon has a few keyless entry system options. For newer models, the key you. have contains a built-in keyless entry system (a remote master key or key fob/smart key).

How to program Chevy Gm key with no keys programmed?

The programming of any of these Gm keys is relatively easy and most of them can be programmed yourself DIY. If you have at least 1 working key…. If all keys are lost…. Then you must perform what we call the 10x10x10 procedure: Insert new key and turn on (do not start!)

Do you need to program a GMC remote?

Remote car keys, also known as key fobs, smart keys or push to start keys, are the latest generation of security car keys. Therefore, onboard programming or self-programming is not available for these type of keys or remotes and an additional equipment or programming machine is necessary to complete this process.

When did GMC Canyon transponder chip key come out?

Transponder Chip Keys: 2008 to 2012, 2015 to 2020. Non-Transponder Key: 2004 to 2012. Please keep in mind that while some keys or key fobs may look the same, they have different capabilities/frequencies/keyways. Therefore, having the right key or key fob is essential.

Can You program a key for a GMC Canyon?

For GMC Canyon models that are equipped with a transponder system and/or remote/ intelligent key/ fob key: Codes are available. However, programming is necessary and therefore you will have to either tow the car to the dealer or have an automotive locksmith come and program the key on site.

How to program a Chevy GMC key fob?

Please try again later. Programming instructions for GM Key Fob with FCC ID: LHJ011, Koblear1xt and others. This video will show you how to program a new remote for many Chevrolet, GMC, Pontiac, and Cadillac vehicles.