How do you install an aftermarket license plate light?
How do you install an aftermarket license plate light?
How to Install a License Plate Light:
- Step 1: Buy New License Plate Lights.
- Step 2: Use a flat screwdriver to remove the license plate housing cover.
- Step 3: Remove the bulb housing gently and unscrew the stock bulb.
- Step 4: Screw your new LED light securely where the old one used to be and place it back in the housing.
How to wire the led trailer license plate light?
You will then need to attach the white wire to ground, usually the trailer frame or the white wire coming from the trailer connector. Once wired the license plate light will illuminate your plate anytime you have the vehicle tail lights on.
Where do I put the light on my license plate?
The PM Lights website states that a variety of license plate lights are available, so one should be chosen that will adequately light the plate and match the car’s design or color. Determine the proper position to mount the license plate light. Drill a mounting hole on the underside of the mounting area.
What do you need to splice a trailer tail light?
You will need to use a quick splice, item # SWC502905-1, and splice the black wire from the LED Trailer License-Plate Light, item # LPL55CB, into the tail light wire on your trailer. The tail light wire is normally the brown wire, but you should use a circuit tester, item # 40376 if needed, to be sure you are splicing into the correct wire.
How do you wire a taillight to a light?
Mounting the light on the bare metal provides the grounding that is required for the light to work. Locate the wire that controls the taillight circuit in order to establish the positive terminal.
You will then need to attach the white wire to ground, usually the trailer frame or the white wire coming from the trailer connector. Once wired the license plate light will illuminate your plate anytime you have the vehicle tail lights on.
How big is an led license plate light?
LED license plate light is encased by a polished stainless steel housing. Clear lens with 6 white LED lights. Easy to hard wire with only two wires to connect. Designed with 8″ between mounting bolts. (8-1/4″ long x 3/4″ wide).
Where is the ground screw on a light fixture?
Locate the green ground screw that will either be on the light fixture itself or on the mounting bracket used to hang the light fixture. Sometimes the light fixture will have a green wire coming from it. This green wire is the ground wire and if it is present there will be no ground screw.
The PM Lights website states that a variety of license plate lights are available, so one should be chosen that will adequately light the plate and match the car’s design or color. Determine the proper position to mount the license plate light. Drill a mounting hole on the underside of the mounting area.
